Hi,
Probably you are using a 64 bit systems. In 64 bit systems the translation is calculated in microseconds and not in miliseconds. So, 15000 microseconds are 0.015 seconds (divided by 1,000,000). Of course there is still a lot to do to reduce it, but never the less this the explanation. Here is a quote of Kevin Fleming from Digium:
This is why the output was changed to microseconds from milliseconds; in
the older version, the lowest number that should be shown was 1
millisecond, even if the actual amount of time consumed was 10
microseconds (or less). The "1" numbers in the output from the older
could easily have been "0.02", which would be closer to the output from
the new version.
Thank you,
Daniel Friedman
Trixton LTD.
Mobile: +41.79.868.7050
Email: dani@3xton.com