HI all,
I am a complete newbie and unfamiliar IP phones and freepbx in general....Since I have that going for me - I thought I would ask for help. I hope this is the right place.
Project Details -
I was thrown into this as the existing stand along equipment would not work. We have two door stations (IP cameras with a IP phone connection) and four GrandStream GXV3275 IP phones scattered through the house.
What I need -
A button press (or call) to ring all the phones and imitate a conversation with the door station. FWIW - I can make a one to one or point to point call, but cannot create a ring group (if that is the right terminology) so that one door station rings all the inside phones.
Solution?
I am told the FreePBX could be used to create ring groups and do the routing. I have installed FreePBX on a Raspberry Pi and if it up and running. Can someone help me get his configured by outlining the basic steps?
Also - I am assuming FreePBX is the right tool for this. If not, please point me in the right direction.
Thanks - Newbie.