Quantcast
Channel: FreePBX Community Forums - Latest posts
Viewing all articles
Browse latest Browse all 226849

Registration Settings in Chan SIP

$
0
0
  • registertimeout = I left this at 60 and I believe this is the interval in seconds between retry attempts from asterisk. I did not mess with this setting
  • registerattempts = I left this at 0 so it would never stop trying to re-register. As in the pop-up bubble it is recommended in case the network goes down for an extended period of time your phones will still register when it comes back up. I did not mess with this setting either
  • minexpiry = The minimum time limit in which asterisk expects your Phone will send a Registration Refresh. This field is in seconds. Consider this the bottom limit on a window of time that Asterisk is looking for a reponse from your Phone.
  • maxexpiry = The maximum time limit in which asterisk expects your Phone will send a Registration Refresh. This field is in seconds. Consider this the upper limit on a window of time that Asterisk is looking for a reponse from your Phone.
  • defaultexpiry = The typical time in which your Phone will send a Registration Timeout Refresh message. This field is in seconds. I made this the same as the Register Timeout Expiration field in my Phone Settings.

For an example:

Phone Config - Register Expiration = 5 min
Phone Config - Reregister before Expiration = 0
FreePBX - Registration Times - minexpiry = 240 secs
FreePBX - Registration Times - maxexpiry = 360 secs
FreePBX - Registration Times - defaultexpiry = 300 secs

This is just what I found in some experimenting with the values. If I have come to this conclusion incorrectly please feel free to correct me or elaborate on my findings. Hope this will help someone else.


Viewing all articles
Browse latest Browse all 226849

Trending Articles