Here are the logs, extension 100 calling 103, both are chan_sip Cisco 7960 devices:
[2015-12-11 20:48:13] NOTICE[2089] chan_sip.c: Peer '103' is now Reachable. (213ms / 2000ms)
[2015-12-11 20:48:23] VERBOSE[2089][C-0000000b] netsock2.c: == Using SIP RTP TOS bits 184
[2015-12-11 20:48:23] VERBOSE[2089][C-0000000b] netsock2.c: == Using SIP RTP CoS mark 5
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [103@from-internal:1] GotoIf("SIP/100-0000000b", "1?ext-local,103,1") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (ext-local,103,1)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [103@ext-local:1] Set("SIP/100-0000000b", "__RINGTIMER=15") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [103@ext-local:2] Macro("SIP/100-0000000b", "exten-vm,novm,103,0,0,0") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-exten-vm:1] Macro("SIP/100-0000000b", "user-callerid,") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:1] Set("SIP/100-0000000b", "TOUCH_MONITOR=1449888503.11") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:2] Set("SIP/100-0000000b", "AMPUSER=100") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:3] GotoIf("SIP/100-0000000b", "0?report") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:4] ExecIf("SIP/100-0000000b", "1?Set(REALCALLERIDNUM=100)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:5] Set("SIP/100-0000000b", "AMPUSER=100") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:6] GotoIf("SIP/100-0000000b", "0?limit") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:7] Set("SIP/100-0000000b", "AMPUSERCIDNAME=Steve M") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:8] GotoIf("SIP/100-0000000b", "0?report") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:9] Set("SIP/100-0000000b", "AMPUSERCID=100") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:10] Set("SIP/100-0000000b", "__DIAL_OPTIONS=Ttr") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:11] Set("SIP/100-0000000b", "CALLERID(all)="Steve M" <100>") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:12] GotoIf("SIP/100-0000000b", "0?limit") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:13] ExecIf("SIP/100-0000000b", "0?Set(GROUP(concurrency_limit)=100)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:14] ExecIf("SIP/100-0000000b", "0?Set(CHANNEL(language)=)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:15] GotoIf("SIP/100-0000000b", "0?continue") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:16] ExecIf("SIP/100-0000000b", "1?Set(__CALLEE_ACCOUNCODE=)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:17] Set("SIP/100-0000000b", "__TTL=64") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:18] GotoIf("SIP/100-0000000b", "1?continue") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (macro-user-callerid,s,29)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:29] Set("SIP/100-0000000b", "CALLERID(number)=100") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:30] Set("SIP/100-0000000b", "CALLERID(name)=Steve M") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:31] Set("SIP/100-0000000b", "CDR(cnum)=100") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:32] Set("SIP/100-0000000b", "CDR(cnam)=Steve M") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-user-callerid:33] Set("SIP/100-0000000b", "CHANNEL(language)=en") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-exten-vm:2] Set("SIP/100-0000000b", "RingGroupMethod=none") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-exten-vm:3] Set("SIP/100-0000000b", "__EXTTOCALL=103") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-exten-vm:4] Set("SIP/100-0000000b", "__PICKUPMARK=103") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-exten-vm:5] Set("SIP/100-0000000b", "RT=") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-exten-vm:6] ExecIf("SIP/100-0000000b", "0?Macro(vm,novm,DIRECTDIAL,)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-exten-vm:7] ExecIf("SIP/100-0000000b", "0?MacroExit()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-exten-vm:8] Gosub("SIP/100-0000000b", "sub-record-check,s,1(exten,103,dontcare)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:1] GotoIf("SIP/100-0000000b", "0?initialized") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:2] Set("SIP/100-0000000b", "__REC_STATUS=INITIALIZED") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:3] Set("SIP/100-0000000b", "NOW=1449888503") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:4] Set("SIP/100-0000000b", "__DAY=11") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:5] Set("SIP/100-0000000b", "__MONTH=12") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:6] Set("SIP/100-0000000b", "__YEAR=2015") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:7] Set("SIP/100-0000000b", "__TIMESTR=20151211-204823") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:8] Set("SIP/100-0000000b", "__FROMEXTEN=100") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:9] Set("SIP/100-0000000b", "__MON_FMT=wav") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:10] NoOp("SIP/100-0000000b", "Recordings initialized") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:11] ExecIf("SIP/100-0000000b", "0?Set(ARG3=dontcare)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:12] Set("SIP/100-0000000b", "REC_POLICY_MODE_SAVE=") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:13] ExecIf("SIP/100-0000000b", "0?Set(REC_STATUS=NO)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:14] GotoIf("SIP/100-0000000b", "5?checkaction") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (sub-record-check,s,17)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-record-check:17] GotoIf("SIP/100-0000000b", "1?sub-record-check,exten,1") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (sub-record-check,exten,1)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:1] NoOp("SIP/100-0000000b", "Exten Recording Check between 100 and 103") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:2] Set("SIP/100-0000000b", "CALLTYPE=internal") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:3] ExecIf("SIP/100-0000000b", "0?Set(CALLTYPE=)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:4] Set("SIP/100-0000000b", "CALLEE=dontcare") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:5] ExecIf("SIP/100-0000000b", "0?Set(CALLEE=dontcare)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:6] GotoIf("SIP/100-0000000b", "0?callee") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:7] GotoIf("SIP/100-0000000b", "1?caller") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (sub-record-check,exten,13)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:13] Set("SIP/100-0000000b", "RECMODE=dontcare") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:14] ExecIf("SIP/100-0000000b", "0?Set(RECMODE=dontcare)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:15] ExecIf("SIP/100-0000000b", "1?Set(RECMODE=dontcare)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:16] Gosub("SIP/100-0000000b", "recordcheck,1(dontcare,internal,103)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [recordcheck@sub-record-check:1] NoOp("SIP/100-0000000b", "Starting recording check against dontcare") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [recordcheck@sub-record-check:2] Goto("SIP/100-0000000b", "dontcare") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (sub-record-check,recordcheck,3)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [recordcheck@sub-record-check:3] Return("SIP/100-0000000b", "") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [exten@sub-record-check:17] Return("SIP/100-0000000b", "") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-exten-vm:9] GotoIf("SIP/100-0000000b", "1?macrodial") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (macro-exten-vm,s,15)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-exten-vm:15] GosubIf("SIP/100-0000000b", "0?clrheader,1()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-exten-vm:16] Macro("SIP/100-0000000b", "dial-one,,Ttr,103") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:1] Set("SIP/100-0000000b", "DEXTEN=103") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:2] Set("SIP/100-0000000b", "DIALSTATUS_CW=") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:3] GosubIf("SIP/100-0000000b", "0?screen,1()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:4] GosubIf("SIP/100-0000000b", "0?cf,1()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:5] GotoIf("SIP/100-0000000b", "1?skip1") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (macro-dial-one,s,8)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:8] GotoIf("SIP/100-0000000b", "0?nodial") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:9] GotoIf("SIP/100-0000000b", "0?continue") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:10] Set("SIP/100-0000000b", "EXTHASCW=ENABLED") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:11] GotoIf("SIP/100-0000000b", "0?next1:cwinusebusy") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (macro-dial-one,s,23)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:23] GotoIf("SIP/100-0000000b", "0?next3:continue") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (macro-dial-one,s,25)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:25] GotoIf("SIP/100-0000000b", "0?nodial") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:26] GosubIf("SIP/100-0000000b", "1?dstring,1():dlocal,1()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:1] Set("SIP/100-0000000b", "DSTRING=") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:2] Set("SIP/100-0000000b", "DEVICES=103") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:3] ExecIf("SIP/100-0000000b", "0?Return()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:4] ExecIf("SIP/100-0000000b", "0?Set(DEVICES=03)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:5] Set("SIP/100-0000000b", "LOOPCNT=1") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:6] Set("SIP/100-0000000b", "ITER=1") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:7] Set("SIP/100-0000000b", "THISDIAL=SIP/103") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:8] GosubIf("SIP/100-0000000b", "1?zap2dahdi,1()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [zap2dahdi@macro-dial-one:1] ExecIf("SIP/100-0000000b", "0?Return()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [zap2dahdi@macro-dial-one:2] Set("SIP/100-0000000b", "NEWDIAL=") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [zap2dahdi@macro-dial-one:3] Set("SIP/100-0000000b", "LOOPCNT2=1") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [zap2dahdi@macro-dial-one:4] Set("SIP/100-0000000b", "ITER2=1") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [zap2dahdi@macro-dial-one:5] Set("SIP/100-0000000b", "THISPART2=SIP/103") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [zap2dahdi@macro-dial-one:6] ExecIf("SIP/100-0000000b", "0?Set(THISPART2=DAHDI/103)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [zap2dahdi@macro-dial-one:7] Set("SIP/100-0000000b", "NEWDIAL=SIP/103&") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [zap2dahdi@macro-dial-one:8] Set("SIP/100-0000000b", "ITER2=2") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [zap2dahdi@macro-dial-one:9] GotoIf("SIP/100-0000000b", "0?begin2") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [zap2dahdi@macro-dial-one:10] Set("SIP/100-0000000b", "THISDIAL=SIP/103") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [zap2dahdi@macro-dial-one:11] Return("SIP/100-0000000b", "") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:9] GotoIf("SIP/100-0000000b", "1?docheck") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (macro-dial-one,dstring,12)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:12] GotoIf("SIP/100-0000000b", "0?skipset") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:13] Set("SIP/100-0000000b", "DSTRING=SIP/103&") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:14] Set("SIP/100-0000000b", "ITER=2") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:15] GotoIf("SIP/100-0000000b", "0?begin") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:16] ExecIf("SIP/100-0000000b", "0?Return()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:17] Set("SIP/100-0000000b", "DSTRING=SIP/103") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [dstring@macro-dial-one:18] Return("SIP/100-0000000b", "") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:27] GotoIf("SIP/100-0000000b", "0?nodial") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:28] GotoIf("SIP/100-0000000b", "0?skiptrace") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:29] GosubIf("SIP/100-0000000b", "1?ctset,1():ctclear,1()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [ctset@macro-dial-one:1] Set("SIP/100-0000000b", "DB(CALLTRACE/103)=100") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [ctset@macro-dial-one:2] Return("SIP/100-0000000b", "") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:30] Set("SIP/100-0000000b", "D_OPTIONS=Ttr") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:31] GosubIf("SIP/100-0000000b", "0?func-set-sipheader,s,1(Alert-Info,)()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:32] ExecIf("SIP/100-0000000b", "0?Set(CHANNEL(musicclass)=)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:33] GosubIf("SIP/100-0000000b", "0?qwait,1()") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:34] Set("SIP/100-0000000b", "__CWIGNORE=") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:35] Set("SIP/100-0000000b", "__KEEPCID=TRUE") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:36] GotoIf("SIP/100-0000000b", "0?usegoto,1") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:37] GotoIf("SIP/100-0000000b", "0?godial") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:38] Gosub("SIP/100-0000000b", "sub-presencestate-display,s,1(103)") in new stack
[2015-12-11 20:48:23] WARNING[13409][C-0000000b] func_presencestate.c: PRESENCE_STATE unknown
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@sub-presencestate-display:1] Goto("SIP/100-0000000b", "state-,1") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (sub-presencestate-display,state-,1)
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [state-@sub-presencestate-display:1] Set("SIP/100-0000000b", "PRESENCESTATE_DISPLAY=") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [state-@sub-presencestate-display:2] Return("SIP/100-0000000b", "") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:39] Set("SIP/100-0000000b", "CONNECTEDLINE(name,i)=Steve 2") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:40] Set("SIP/100-0000000b", "CONNECTEDLINE(num)=103") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:41] Set("SIP/100-0000000b", "D_OPTIONS=TtrI") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:42] Macro("SIP/100-0000000b", "dialout-one-predial-hook,") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dialout-one-predial-hook:1] MacroExit("SIP/100-0000000b", "") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-dial-one:43] Dial("SIP/100-0000000b", "SIP/103,,TtrIb(func-apply-sipheaders^s^1)") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] netsock2.c: == Using SIP RTP TOS bits 184
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] netsock2.c: == Using SIP RTP CoS mark 5
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] app_stack.c: -- SIP/103-0000000c Internal Gosub(func-apply-sipheaders,s,1) start
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@func-apply-sipheaders:1] NoOp("SIP/103-0000000c", "Applying SIP Headers to channel") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@func-apply-sipheaders:2] Set("SIP/103-0000000c", "SIPHEADERKEYS=") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@func-apply-sipheaders:3] While("SIP/103-0000000c", "0") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] app_while.c: -- Jumping to priority 7
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@func-apply-sipheaders:8] Return("SIP/103-0000000c", "") in new stack
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] app_stack.c: == Spawn extension (from-internal, 103, 1) exited non-zero on 'SIP/103-0000000c'
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] app_stack.c: -- SIP/103-0000000c Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] app_dial.c: -- Called SIP/103
[2015-12-11 20:48:23] VERBOSE[13409][C-0000000b] app_dial.c: -- Connected line update to SIP/100-0000000b prevented.
[2015-12-11 20:48:24] VERBOSE[13409][C-0000000b] app_dial.c: -- SIP/103-0000000c is ringing
[2015-12-11 20:49:57] VERBOSE[13409][C-0000000b] app_macro.c: == Spawn extension (macro-dial-one, s, 43) exited non-zero on 'SIP/100-0000000b' in macro 'dial-one'
[2015-12-11 20:49:57] VERBOSE[13409][C-0000000b] app_macro.c: == Spawn extension (macro-exten-vm, s, 16) exited non-zero on 'SIP/100-0000000b' in macro 'exten-vm'
[2015-12-11 20:49:57] VERBOSE[13409][C-0000000b] pbx.c: == Spawn extension (ext-local, 103, 2) exited non-zero on 'SIP/100-0000000b'
[2015-12-11 20:49:57] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [h@ext-local:1] Macro("SIP/100-0000000b", "hangupcall,") in new stack
[2015-12-11 20:49:57] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-hangupcall:1] ExecIf("SIP/100-0000000b", "0?Set(CDR(recordingfile)=.wav)") in new stack
[2015-12-11 20:49:57] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-hangupcall:2] GotoIf("SIP/100-0000000b", "1?theend") in new stack
[2015-12-11 20:49:57] VERBOSE[13409][C-0000000b] pbx.c: -- Goto (macro-hangupcall,s,4)
[2015-12-11 20:49:57] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-hangupcall:4] ExecIf("SIP/100-0000000b", "0?Set(CDR(recordingfile)=)") in new stack
[2015-12-11 20:49:57] VERBOSE[13409][C-0000000b] pbx.c: -- Executing [s@macro-hangupcall:5] Hangup("SIP/100-0000000b", "") in new stack
[2015-12-11 20:49:57] VERBOSE[13409][C-0000000b] app_macro.c: == Spawn extension (macro-hangupcall, s, 5) exited non-zero on 'SIP/100-0000000b' in macro 'hangupcall'
[2015-12-11 20:49:57] VERBOSE[13409][C-0000000b] pbx.c: == Spawn extension (ext-local, h, 1) exited non-zero on 'SIP/100-0000000b'I'll admit I'm relatively new to this software, but I don't see anything obvious there. FollowMe is turned off, most settings are default.
Logs seem to indicate I let the device ring for 33 seconds before I hung up. Thanks!