Hey guys, I've got an interesting request and I quite frankly don't know if it's even possible. I just recently changed our Cisco phones to run on Skinny firmware with the chan-sccp-b module and it changed the way our reject button works. It used to be that if I pushed reject (or iDivert as Cisco calls it), the phone would simply send a busy signal back to Asterisk and the call would handle as normal. With the new firmware, the phone actually transfers the call to an extension that I can define in its configuration.
What I'd like to do is make a custom feature code of sorts that sends the call to one of two destinations based on where it came from. Right now we have a ring group for our main inbound number which rings all the phones in our office, and I also have my own inbound number that goes directly to my phone. I'd like to make it so that if I press reject on my phone on the main line then it goes to the main voicemail, and if it's to my direct line I'd like it to go to my personal voicemail. Is there any way to do this? Thanks in advance!