I am trying to set up passive tapping of 4 analog lines, using a Sangoma B600E card and tapping box. Installed FreePBX 14.0.3.13. Activated dahdi, and it sees the analog ports 1-4. I’m uncertain about where to go from here and can’t find any specific instructions about setting this up. In the Call Recording Module I see that I need to set up a destination, but this doesn’t make a great deal of sense to me since it’s a passive tap and the card isn’t routing the call. I set up the destination to Trunks, and created a separate trunk for each port, but that’s as far as I’ve been able to go. If I make a call in, nothing appears in var/spool/asterisk/monitor.
↧