Clik here to view.
TLS trunk not disconnecting if exension hangs up first
BlazeStudios: The IP address the service is bound to is never required for the TLS cert. Your cert will have the Common Name (the domain you are securing) and it can have additional SANs. Unless you...
View ArticleProblem with GUI
Sounds like you need more space on your system. Can you expand the disk size?
View ArticleClik here to view.
TLS trunk not disconnecting if exension hangs up first
This is the common name part of the certificate sent by Telnyx: But that is not the domain name part of the URI that Asterisk has been told to connect back to. It has been told to connect back to the...
View ArticleClik here to view.
TLS trunk not disconnecting if exension hangs up first
david55: Record-Route: sip:192.76.120.10:5061;transport=tls;lr;r2=on;ftag=XyBXH90cyy91g Not sure that is doing what you think it is doing considering that a record-route is added through each hop in...
View ArticleClik here to view.
TLS trunk not disconnecting if exension hangs up first
BlazeStudios: I’ve done this before with Kamailio and Asterisk. Kamailio acted as a pass-through proxy and the TLS certificate was on Asterisk. Every time the Kamailio record-route was the top route,...
View ArticleTLS trunk not disconnecting if exension hangs up first
Puzzling over this thread a bit, it seems to me that Asterisk’s “verify server” does not work correctly. Indeed, it wouldn’t even work when connecting to another Asterisk server with a valid...
View ArticleAutomation with FreePBX/Softphone
Does sangoma connect integrate with Microsoft Power Automate, zappier, or make.com? I want to use my PBxact system and sipstation, but I want to have a softphone API that can connect to Microsoft...
View ArticleOutbound Caller Name on Stores Phone changes to the Stores DID, causing the...
When the store calls outbound to any number, the caller id name changes to the stores DID. I don’t know where this behavior is coming from in my config. The CID name should just be the same as the...
View ArticleHow to Setup Static IPv6 Address on FreePBX?
How to setup static IPv6 address in FreePBX without DHCPv6 or SLAAC? I can’t seems to find any IPv6 related settings in the System Admin module, the IP address settings in the web UI only shows IPv4.
View ArticleQuestion about new sip trunk addressing
Yes , the directly connnected subnets don’t need gateway for inside subnet traffic. I just wonder why the new subnet gateway was chosen as default one when the new nic was just setup…
View ArticleEmpowering Marketing Strategies with Proxy Unblockers
digital presence and engagement are paramount, the utilization of proxy unblock and unblock proxy services has become increasingly important for marketers looking to overcome online barriers and reach...
View ArticlePerformance issue when Queue Autofill is enabled
After changing to member=PJSIP/… there is no task processor queuing. This would bypass alot of the agis/code written for local extensions What features might be lost when utilizing this method?
View ArticleAny wayto upgrade a freepbx 16 to 17?
Any ideas about my last post? I want to keep this topic open, so I can fix the problem.
View ArticleAny wayto upgrade a freepbx 16 to 17?
Are you using chan_sip? There have been other posts earlier suggesting that chan_sip doesn’t work with freepbx 17 and you need to switch pjsip
View ArticlePm2 installation on
Hello everybody, I am trying to upgrade/update the FreePBX local installation I have and it always asks to update the pm2 before to the rest update. Unfortunately the pm2 is not possible to be...
View ArticleSCCP Manager manager installation errors
Hi all, so my goal is to setup the cisco cp8841 phones on the FreePBX sccp, I have been reading fragments of instructions (I haven’t find the definitive guide) in different posts of this forum, and...
View ArticleClik here to view.
Pm2 installation on
You have very outdated OS and FreePBX, but this thread might help Installing FreePBX without PM2 module Installation / Upgrade I managed to install Asterisk 16 (detailled version: Asterisk...
View ArticleClose the laptop display lid, the system goes standby
Hello, I have installed latest FreePBX 16 on my Sony vaio laprop, and when I close the display lid, the system goes standby. on the previous version it didn’t do this. please help me easily how can I...
View ArticleClose the laptop display lid, the system goes standby
Welcome to the forum. I’m not familiar with that specific device, but other laptops I’ve used for server purposes have a BIOS setting that will control this.
View ArticleClik here to view.
Need Dial plan to call forward to a number, pause with no prompt, then enter...
Those are not instructions for FreePBX, unless modified in some way that is not common. There are a few threads here in the forum discussing this, including: Dial into external conference including...
View Article