SCCP Manager manager installation errors
The procedure worked, I have finally installed it. Thanks But in the add phone option, list types only for 79xx series, and all I have are 88xx ones… is there a way to add support for the 88xx ones?...
View ArticleSCCP Manager manager installation errors
You can go to: SCCP Manager System Parameters In SCCP Model Information, click on “Update Files from Provisioner” Select your model (88xx) and download the files After that, enable the phone (click on...
View ArticleFail2ban keeps failing to start due to "ERROR no accessible config files" for...
Alrighty, I got it working all-good now! Now for me to come clean here, @billsimon when I first setup your 1-click FreePBX v16 droplet on DigitalOcean, I just glanced over your Get Started section and...
View ArticleClik here to view.
SCCP Manager manager installation errors
PS: it looks like the 8841 firmware is not available in the provisioner, but you can download the sccp firmware elsewhere and paste the folder contents into /tftpboot on your server Just extract the...
View ArticleClik here to view.
SCCP Manager manager installation errors
PS²: According to this forum thread: Provision Cisco CP8841 to FreePBX using Chan-SCCP - #15 by tmittelstaedt These phones do not have SCCP firmware, but SIP - however, the chan_sccp driver is...
View ArticleClik here to view.
Fail2ban keeps failing to start due to "ERROR no accessible config files" for...
I just launched a fresh copy and, before updating, investigated it. First of all, the Getting Started documentation applied to an earlier iteration of the image. Now the commercial repo and sysadmin...
View ArticleClik here to view.
SCCP Manager manager installation errors
I was able to find the firmware for the four model of cisco phones I have and you are correct all of them seems to be sip only. Only the spa525 was downloaded using the “update file from provisioner”,...
View ArticleClik here to view.
SCCP Manager manager installation errors
I was able to enable three of the four models that I have, the only one that I had to add manually was the 8845, and I don’t know what “Load information ID” to use, so I came up with a id name that I...
View ArticleFirewall - Interfaces
Hi, Firewall issue : On a fresh freepbx 17 beta install, I added some trusted IP and networks in the firewall configuration. Responsive Firewall is active. But no way to move the only one interface...
View ArticleClik here to view.
Freepbx 15 to 16 upgrade
Hi, I have been trying to update my freepbx I updated asterisk to v15, and followed the below instructions Upgrade FreePBX 15.0.17.64 to FreePBX 16 Installation / Upgrade I am on the newest version of...
View ArticleFreepbx 15 to 16 upgrade
have you checked /etc/sangoma folder is exist or not on your system?
View ArticleAdvanced Recovery Secondary Server Query During Testing
Hello, I appear to AdvRec configured correctly in v16.0.40.7. But I need the active:standby servers to act as resilient gateways for a stack of Cisco VG224 analogue gateways. The primary server is...
View ArticleClik here to view.
STIR/SHAKEN Webinar
Just a heads-up for everyone that I’ll be doing a webinar about STIR/SHAKEN and Asterisk next week, you can register here: https://register.gotowebinar.com/register/1686882171215882069 I expect I will...
View ArticleClik here to view.
SCCP Manager manager installation errors
Although they are enabled, the firmwares are not being recognized by the SCCP module, when a phone is enabled and available for use, the background turns green with the firmware information, like this...
View ArticleProblems with insecure ssl setting in basefile edit
We have an issue with some sites where over the easter perios call-logs and status stopped working on P310 handsets. The handsets had been at some point upgraded to 4_19_2 and EPM to 16.0.86.11 on...
View ArticleClik here to view.
SCCP Manager manager installation errors
I put the 8841 firmware files in the root of /tftpboot and did a fwconsole chown, although it didn’t automatically recognize it in sccp_manager when I edited the phone settings for LoadImage to be...
View ArticleClose the laptop display lid, the system goes standby
dicko You are everywhere, you have helped me many times already, thank you very much.
View ArticlePm2 installation on
It seems that the problem is something else. After I update the Freepbx from 13 to 14 I can’t even the “sudo apt update” I get the follwoing error : “apt: error while loading shared libraries:...
View ArticleDocker not working on reboot with Fpbx 17 beta
I’m noticing that, on reboot, I get a weird message from Docker: docker run --name=QM --volume=/opt/queuemetrics_data:/data -p 8080:8080 --restart unless-stopped -d loway/queuemetrics...
View ArticleRemote pbx appearing with local CID
With my local pbx extension 303 I dial a remote pbx extension via Iax trunk As the remote pbx already has an ext.303 , the called party receives my call as if I were his local 303/name extension. Why...
View Article
