Multiple teams, outbound CID by country/area code
Yes, a team member can only be part of a single team. Will something like this work then to incorporate accountcode? [custom-variables] exten => s,1,Set(RecruitingCA=12345678911) ; Canadian CID for...
View ArticleVoIP Server configuration in odoo 17 for Freepbx 16
yes, it’s turned on. ws - 0.0.0.0 - All = yes wss - 0.0.0.0 - All = yes
View ArticleVoIP Server configuration in odoo 17 for Freepbx 16
I’m not familiar with Odoo but if it’s installed on your FreePBX server then what you have should work. If it’s a separate server, then it wouldn’t be localhost but the IP of your FreePBX server.
View ArticleVoIP Server configuration in odoo 17 for Freepbx 16
I am looking for the url which need to be entered in the WebSocket. ws://localhost ? What’s that for my PBX?
View ArticleClik here to view.
VoIP Server configuration in odoo 17 for Freepbx 16
adell4444: then it wouldn’t be localhost but the IP of your FreePBX server. See previous reply.
View ArticleClik here to view.
VoIP Server configuration in odoo 17 for Freepbx 16
setting is turned on but there is no url there.
View ArticleVoIP Server configuration in odoo 17 for Freepbx 16
I don’t know how else I can explain it to you. If the FreePBX server is separate from Odoo, put the IP address of the FreePBX server instead of localhost.
View ArticleVoIP Server configuration in odoo 17 for Freepbx 16
yes, odoo server is separate. and what’s the default port for the websocket.
View ArticleMultiple teams, outbound CID by country/area code
Perhaps this is shorter with a canadian number flag: [custom-variables] exten => s,1,Set(RecruitingCA=12345678911) ; Canadian CID for Recruiting exten => s,n,Set(RecruitingUS=98765432111) ; US...
View ArticleFreebpx V17 at Debian 12: lets encrypt generation failure
we are having the same issue. we set the Admin to 8080 and LetsEncrypt to port 80, ran the New Let’s Encrypt Certificate and get the error Unable to update challenge :: authorization must be pending...
View ArticleAccount recovery to request zend reset
Previous msp gave me local login creds but nothing for Sangoma. I THINK i have my new server configured properly, all thats left is transferring the registered modules. This seems easy enough but I’m...
View ArticlePBX VPN tunnel - connect but no audio
Hi All, I have the following setup: Pfsense firewall with public IP in cloud > NAT port forward to FreePBX IP address via Tailscale VPN. I am using Groundwire softphones on the public internet. I...
View ArticlePBX VPN tunnel - connect but no audio
Have you added the VPN subnet to Settings > Asterisk SIP Settings > Local Networks?
View ArticleAccount recovery to request zend reset
You may need to reach out through customer service through your new Sangoma account and check with them what the process for transferring a deployment to a completely new Sangoma account would be.
View ArticleClik here to view.
PBX VPN tunnel - connect but no audio
adell4444: Have you added the VPN subnet To be more specific, because others have made this mistake, not the subnet of the VPN tunnel network but the subnet of the network that the phone is plugged...
View ArticlePBX VPN tunnel - connect but no audio
Thanks. To the PBX the traffic looks like it’s coming from 192.168.10.1, which is the IP of the firewall at the PBX site. The WAN site, has a local IP of 10.0.0.0/24, however looking at PfTop in...
View ArticleNo external access to extensions
Hey Mate, I understand that you are facing some problem in accessing the extension, so I am providing you the official documentation to solve your problem. I think it will be helpful for you. Official...
View ArticleHide/Disable Recording for CDR Reports
Hello. I would like to hide or disable the recording that would be appear within the module “CDR Reports”. Is it any method for me to fulfill the requirement above? Thank you.
View ArticleFreepbx 17 and Zulu?
I just installed Freepbx 17 on a couple VMs and I cannot find Zulu anywhere. Is Zulu being deprecated? I have been trying to move users to Sangoma Connect but most simply refuse to learn a new...
View ArticleFreepbx 17 and Zulu?
Zulu is dead, the only software supported on both desktop and mobile is Sangoma Connect, which isn’t all that difficult… usual user excuse…
View Article