Cant make outbound calls. Inbound calls work fine
A lot of weird stuff here. Assuming that the call to a VZW mobile is what you attempted, it somehow got treated as anonymous SIP (on chan_sip no less). What is the Context for the calling extension?...
View ArticleCant make outbound calls. Inbound calls work fine
You are also permitting guest incoming calls, which wouldn’t normally be necessary if you were to use chan_pjsip. I wonder if a local extension is matching against your anonymous caller match rule,...
View ArticleCant make outbound calls. Inbound calls work fine
I tried calling my wifes cellphone from the microsip connected to freepbx. It didnt work. The *43 gives the same “The number you have dialed is not in service”
View ArticleCant make outbound calls. Inbound calls work fine
Yea I enabled anonymous and disabledthe firewall just to check
View ArticleCant make outbound calls. Inbound calls work fine
I will be having a plumbing business where 100 calls a day from random numbers. How would that work then if every number has to be defined?
View ArticleCant make outbound calls. Inbound calls work fine
At the Asterisk command prompt, type pjsip set logger on sip set debug on Make a call to *43, paste the Asterisk log for the call at pastebin.com and post the link here.
View ArticleCant make outbound calls. Inbound calls work fine
The reason I suggested that the number be defined was because the log showed the call as being treated as incoming. My second reply suggested an alternative theory in which an outgoing call was being...
View ArticleClik here to view.
PM200 disconnecting when touched
I’m not aware of other reports of this. Are you using the brackets to connect the sidecar to the phone, or are you relying only on the USB plug?
View ArticleCant make outbound calls. Inbound calls work fine
[2024-06-13 17:50:44] VERBOSE[1751] chan_sip.c: <--- SIP read from UDP:47.14.8 - Pastebin.com PS. Appreciate you helping me along with David !
View ArticlePM200 disconnecting when touched
Hi Lorne, I am using the bracket. This occurred a few months ago (same phone and sidecar) and I thought it was resolved after I removed the bracket and PM200 and reattached with the bracket. I tried...
View ArticleCant make outbound calls. Inbound calls work fine
So ext. 101 is connecting to chan_sip on port 5160. Is that intentional? If so, please post your chan_sip extension settings. Do you have a context setting (other than from-internal) somewhere? If so,...
View ArticleCant make outbound calls. Inbound calls work fine
Im totally new to pbx systems and first time setting this all up! The only way I got microsip to connect was adding :5160 at the end of the ip address. I read that on reddit somewhere. I am not sure...
View ArticleClik here to view.
Cant make outbound calls. Inbound calls work fine
By default, your PBX has pjsip listening on port 5060 and chan_sip on 5160. When you created extension 101, which did you specify? If you don’t have an extension 101, I don’t see how incoming is...
View ArticleClik here to view.
Cant make outbound calls. Inbound calls work fine
In Asterisk SIP settings, pjsip tab, what is Port to Listen On? On chan_sip tab, what is Bind Port?
View ArticleUCP WebRTC Phone Overrrides Outbout Route CallerID
The extension 1001, the outbound route and the trunk all have the same 10-digit callerID. You can see “463[redacted]” and the lock icon in the route setup. However sngrep still sees 991001 as the...
View ArticleClik here to view.
FPBX 17 fresh install getting the "Please Run: fwconsole reload --verbose" error
I just got the same error and i ran upgradeall via shell yet still have the same problem in my test box for v17 sudo -u asterisk fwconsole reload --verbose Reload Started Unable to access the running...
View ArticleFPBX 17 fresh install getting the "Please Run: fwconsole reload --verbose" error
Exception trace: at /var/www/html/admin/libraries/pest/Pest.php:232 Pest->doRequest() at /var/www/html/admin/libraries/pest/Pest.php:364 Pest->post() at...
View Article