Clik here to view.
Cisco 7941G gets a "Registration rejected"
dicko: advising anyone to use a drastically reduced range of 7 demonstrates lack of understanding that was not helpful to the OP, that’s just why I posted Except that I didn’t advise doing that, I...
View ArticleFreePBX 17 GA Issues Encountered
Oh damn I should have asked the question “why not do something that makes the intent clear when a quick hack that obscures things will do” LOL It must have shaved a whole 4 or 5 MB on a typical 1TB...
View ArticleClik here to view.
Cisco 7941G gets a "Registration rejected"
My apologies, I must have misread tmittelstaedt: you may want to narrow this range down to say 16384 and 16390, and then map UDP ports 16384 through to 16390 to your phone from the outside. This will...
View ArticleDebian source repository (deb-src)
Howdy! I recently set up a fresh Debian Bookworm system with FreePBX 17 and migrated everything over from an old FreePBX 16 install. Yay! Smooth sailing with the installer script and backup...
View ArticleDebian source repository (deb-src)
It would be but Sangoma has never provided those which would be needed to build third party modules like vosk’s stt integration
View ArticleDebian source repository (deb-src)
previously, one could download the srpms for prior FreePBX releases c/o yum install sangoma-devel and yumdownloader --source asterisk... … I’m seeking the equivalent to the specfiles and patches for...
View ArticleDebian source repository (deb-src)
It’s nothing to do directly with 3rd party anything, without knowing the compile switches, you will need to compile from source , which is not a problem, just an unnecessary pain.
View ArticleClik here to view.
Cisco 7941G gets a "Registration rejected"
dicko: assumed that that was your advice That’s why I had double-quoted it - it was a quote from the weblink I cited. I was still trying to figure out what “startMediaPort” and “stopMediaPort” were...
View ArticleFreePBX 17 GA Issues Encountered
hack - clever bit of code or config. The issue is what is “clever” has changed over the years. Once upon a time it was “clever” to abbreviate the hell out of commands so list became ls,...
View ArticleClik here to view.
Cisco 7941G gets a "Registration rejected"
tmittelstaedt: All have "worked’ with each other and in no case have I had to muck around with changing the RDP port defaults in any device. In many cases, you can’t anyway. There is no problem in...
View ArticleClik here to view.
Cisco 7941G gets a "Registration rejected"
david55: I think you are re-introducing the misunderstanding that the ports have to be in the ranges for both That is exactly what I am trying to address. There is very very little documentation out...
View ArticleClik here to view.
Cisco 7941G gets a "Registration rejected"
tmittelstaedt: As I said before, it is apparent that the 10000-20000 range in Asterisk config is only used to limit an rtp origination port, It only limits the port used on the Asterisk machine, but...
View ArticleCisco 7941G gets a "Registration rejected"
But then the reception port must be negotiated during the SIP handshake, correct?
View ArticleCisco 7941G gets a "Registration rejected"
no, rtcp port will always be rtp port++, it is part of the protocol, not negotiated.
View ArticleFreePBX 17 GA Issues Encountered
pretty sure linux never had list before somebody cleverly abbreviated it to ls, Mostly us hackers/crackers learn quickly not to be known for TLDR on anything feel free to figure out :(){ :|: & };:
View ArticleFreePBX 17 Dashboard Error: Unable to configure networking service:...
Networking service configuration cannot be performed concurrently with an active systemd-networkd service. To enable FreePBX for managing your networking configuration, you’ll need to disable...
View ArticleSip trunk provider without kyc?p
is there any sip trunk provider who provides trunking without documents and prices are cheaper. if there is any please let me know . to get company documents is very hard for a startup sometimes
View Article