Sudden NAT handling change in FreePBX 13
Hi Daniel, Basically, I am almost certain that I have the bonding configuration set correctly. It seems to be in line with what Paul Mellors and the Centos documentation provides and it was in use for...
View ArticleSudden NAT handling change in FreePBX 13
Hi Michael, It seems that this is a bug with the firewall module (It cannot read the correct file because of permissions problem probably). I would try to remove the bridge since you do not really...
View ArticleWobbly extension?
Try under either your log files or under reports, asterisk info, registry's or peers to see if you can notice the one going offline.
View ArticleTrying to update to 6.12.65-31 fails
I still keep trying and never can move forward to the next version. The log shows it occuring but the version show is still 6.12.65-30.
View ArticleStrange dialing
The post is empty, I would suspect a root intrusion via your inadequate firewall look for suspicious files in /tmp
View ArticleHelp with recompling chan_sip
I would follow an OS appropriate "build from scratch" recipe in the wiki , unless you compile with the same flags then the modules likely won't load on another build, apply your patches before the...
View ArticleSudden NAT handling change in FreePBX 13
Hi Daniel, The error shows up whenever the bridge is defined. Enabling or disabling (even removing) the firewall does not seem to have any impact on the error message. Nevertheless, the system seems...
View ArticleOpenVOX A400P 2 FXS 1 FXO and DAHDI Helper Module
Thanks Nick! Was it useful to start another thread on this you ask? Yes! By all means. As your answer, "you don't" was one of the most current and succinct answers I found. Manual config it is......
View ArticleTrying to update to 6.12.65-31 fails
Hi! If you have a backup I would suggest restoring from it because the state of your installation might be uncertain but try to run the scripts manually (taking care of not forgetting to run any). I...
View ArticleFreepbx 13 upgrade
Hi,I just upgradied from 12 to 13 ,On system admin i still seePBX Firmware: 6.12.65-31PBX Service Pack: 1.0.0.0Is this normal ?I think it should be 10.12.13Thanks
View ArticleFreepbx 13 upgrade
Hi! If you only updated FreePBX gui and not the FreePBX distro it is normal, both must be separately updated. The distro is either updated using System Admin Pro or by manually running script (and you...
View ArticleFreepbx 13 upgrade
Thank you for the quick answer.In system admin it does not show any distro update.Should i do the update manualy or should i wait for the update comming up ?
View ArticleFreepbx 13 upgrade
The script are here http://wiki.freepbx.org/display/PPS/FreePBX-Distro-6.12.65 and here http://wiki.freepbx.org/display/PPS/FreePBX-Distro-10.13.66 I would suggest you make a backup before upgrading,...
View ArticleClik here to view.
Freepbx 13 upgrade
assos40: Thank you for the quick answer.In system admin it does not show any distro update. That's weird because it usually does... Maybe it doesn't between different tracks, I am not sure... assos40:...
View ArticleKernel panic after FreePBX 13 Upgrade
Just upgraded to FreePBX Distro 10.13.66-6.Note: We are virtualized on Hyper V 2012 R2 with linux integration services installed (and have been successfully for well over a year) On the Grub loader,...
View Article'Inbound Fax Destination Change' after upgrade from 12 to 13
After upgrading from 12 to 13 there is a critica error on DashboardInbound Fax Destination ChangeDo Someone know how to fix this ?
View ArticleClik here to view.
Howto ENUM Trunk and Dialed Number Manipulation Rules in FreePBX 6.12.65-30
Hi Folks, since it took me some time to get it right, and google didnt come up with some helpfull advice or very outdated tutorials i put some infos here: howto add a ENUM Trunk for outgoing calls (no...
View ArticleClik here to view.
Solved partway: A cascade with Follow Me fuction --> FMFM
did unmark it, but you've been the only guy here around. well i found a work around, but the FMFM, it's still inop. now i have the incoming call go to my ext., with follow me activ for this ext.,...
View ArticleKernel panic after FreePBX 13 Upgrade
watching this for a response, had the same issue. just running on the 431 for now.
View Article'Inbound Fax Destination Change' after upgrade from 12 to 13
Hi! Are you talking about the message telling you that fax destinations are now done in user management? If so, have you tried it? If not, what is the exact error message? Good luck and have a nice...
View Article