[SOLVED] Paging stopped working
Any side effects to making that switch? I'm not up to speed on the current differences in functionality between the two but remember something years ago that there were things meetme did that...
View ArticleCreating Static Routes
I am looking for an way to create static routes. The FreePBX GUI only allows you to add a static IP and default gateway under system admin. Is there somewhere else in the GUI that allow static routes...
View ArticleCreating Static Routes
Hi, You will need static routes through the linux operating system. Thank you, Daniel FriedmanTrixton LTD.
View ArticleCreating Static Routes
I realize that is what I need to do, but is there a good source of instruction on how to do that? I have found lots of bits and pieces but nothing that really explains it to novice Linux admin. I can...
View ArticleDigium softkey for Recording
No Digium Phones do not allow sending DTMF down the active channel with a speedial or BLF
View ArticleFreePBX Distro 64 BIT
Seems relevant to add to this thread.Once the (easy) decision is made to use 64bit FreePBX, what are the pro's and con's of using Asterisk 11 or 13 ?I presume there's a choice during install phase....
View ArticleFreePBX Distro 64 BIT
Asterisk 13 has PJSIP, which is a much more solid SIP implementation than chan_sip. Also, some pretty major under-the-hood changes make it a lot faster and more stable. Of course, YMMV. It doesn't...
View ArticleFreePBX Distro 64 BIT
Thanks Rob, I'll give it a go with Asterisk 13. Hope all the DAHDI wrinkles have been flattened too.
View ArticleCreating Static Routes
Hi, Let us assume that the ip address of your SIP provider is 200.200.200.100. Add a permanent static route to the file /etc/sysconfig/network-scripts/route-eth0 like this: 200.200.200.100/24 via...
View ArticleUpgradng modules
Hello I am working on upgrading some of the modules in my FreePBX. It is simple to upgrade a module that has v2.1 to v 2.22 But, there are a few modules that go from v2.1 to v12.10 Am I worried for...
View ArticleCreating Static Routes
I found the network-scrips folder, but there is no "route-eth0" file in the folder? Do I just create file called "route-eth0" and add the static routes?
View ArticleCreating Static Routes
Hi, Yes, you should create this file and then restart the network service. Thank you, Daniel FriedmanTrixton LTD.
View ArticleFailure on PBX to PBX Call over a trunk
I had another look at this because it was bugging me. I changed over one of the trunks from SIP to PJSIP and the transferred started working in one direction, you can transfer back to the SIP trunk...
View ArticleDigium softkey for Recording
Thank you Tony. Are there any phones that you are aware of that do? Take care, Christian
View ArticleHelp with recompling chan_sip
Hi el_es, wow thanks for explaining this all. It's definitely a great read for a newbie in linux, I tried the whole process for what was outlined in the ubuntu instructions and after following it to a...
View ArticleClik here to view.
Help with recompling chan_sip
I however have been compiling asterisk on various OS's for quite a few years. From the horses mouth :- https://wiki.asterisk.org/wiki/display/AST/Installing+Asterisk+From+Source (but don't do the...
View ArticleProper procedure to update FreePBX distro v13?
Thanks for your input guys! I will stick with just Module Admin updates. All I need is system that is stable and works.
View ArticleHelp with recompling chan_sip
Hi dicko, Thanks very much for that I appreciate it. I had looked into that but because that is cisco specific it will not work for me. I have some Avaya phones that do work with the default chan_sip...
View Article