Convert AsteriskNOW 3.0.1 to the latest FreePBX Distro?
http://letmegooglethatforyou.com/?q=upgrade+AsteriskNOW+3.0.1
View ArticleConvert AsteriskNOW 3.0.1 to the latest FreePBX Distro?
Was just wondering if this will remove the AsteriskNOW totally? It currently has the FreePBX GUI, just would rather upgrade the current install for a client instead of installing with the Freepbx iso...
View ArticleConvert AsteriskNOW 3.0.1 to the latest FreePBX Distro?
Did you try it yet? the script is a text file (shell script). The post eventually points you here if you have any problems after running it.
View ArticleConvert AsteriskNOW 3.0.1 to the latest FreePBX Distro?
I took a snapshot and its running now. We'll see what happens. May be more involved with my clients setup since it has a warm spare as well. Im not sure if running this on the spare would break...
View ArticleClik here to view.
Convert AsteriskNOW 3.0.1 to the latest FreePBX Distro?
hehe, that's why its good to know what the script is going to do if you provide support to a client. That's why they pay you . You should be aware that the script is only transitional and...
View ArticleReload failed because retrieve_conf encountered an error: -1
Hello I have FreePBX 12.0.76.2 and asterisk 13 installed, this error would happen to me from time to time when I hit the Apply Config button, this is a full stack trace : eload failed because...
View ArticleCisco 7960 Incoming Call Problem
Hi All! I'm fairly new to FreePBX and am using this is purely a learning experiment. I'm using a trial of SIPStation and when using a pjsip softphone I'm able to make and receive calls without issue...
View ArticleSeveral extensions showing UNKNOWN status in CHAN_SIP PEERS
Using FreePBX 13.0.26, I have about 5 particular extensions that are showing up as UNKNOWN in the show sip peers report. These users are complain that they are missing calls. Sometimes I can call them...
View ArticleAttended Transfer
Having problems with attended transfer and grand stream gxp 2130&2160 phones, has all of a sudden stopped working, have tried phone firmware updates but still having the same issue
View ArticleWrong Server Time
Currently have an issue with the server showing the wrong time.. Correct UTC time via ssh, server time is 5 hours ahead. Using the default ntp server pool.ntp.org. Any ideas? Checked time zone...
View ArticleClik here to view.
Redirect calls if one member of a ring group is busy
Does no one have an idea? Can't be so difficult for all you experts...
View ArticleCompare the estimated hold time and max wait time for going to failover...
Hello, I want to know if it's possible to use the estimated hold time in order to compare it to the max wait time? If the estimated hold time is superior to the max wait time so we are going to...
View ArticleWhich SIP clients use TURN server?
I have a ZOIPER softphone which has STUN server settings, if I am using it but I'm using the online numb turn server. Which SIP phones have the setting to use these ?
View ArticleWrong Server Time
Hi! Check if the time zone is ok in System Admin and if it is ok then check the time zone in php.ini. Good luck and have a nice day! Nick
View ArticleTwo addresses for NAT
My sip trunk provider hands off the sip trunks on its own ethernet interface. This interface is restricted to only accessing these SIP trunks. I get a public IP for registering the SIP trunks. I also...
View ArticleReload failed because retrieve_conf encountered an error: -1
Hi!! Is the gpg package installed? Good luck and have a nice day! Nick
View ArticleSeveral extensions showing UNKNOWN status in CHAN_SIP PEERS
My guess is you need to fiddle with the firewall settings at the remote site(s) where the extensions show up UNKNOWN. If the device registers on reboot and then disappears from the network you'll need...
View ArticleSeveral extensions showing UNKNOWN status in CHAN_SIP PEERS
Thanks for the suggestions. I forgot to mention that all my extension are on the same LAN as the server. There isn't any particular switch that is common to these 5 devices. The trouble began right...
View ArticleGUI error after updating modules
Any direction at all here? This is a production system that has been working great until now. Since I have no access to any administration functions, I've tried disabling EPM and a few other...
View Article