Update modules, HD full, system down. :(
Your database is corrupt probably because you ran out of disk space.
View ArticleVoicemail Greeting Upload in UCP not working
Any idea why I would get this: Failed to load resource: the server responded with a status of 500 (Internal Server...
View ArticleUpdate modules, HD full, system down. :(
Any way to restore from a backup via CLI, when fwconsole doesn't function, or would it just be easier to build a new machine? If I build a new machine, someone's going to have to do a zendreset for...
View ArticlePBXact 100 not detecting A400 FXO card
I've been messing around with this issue for the last week. I got the system to finally see the card after taking it apart, pushing the card to make sure it's securely installed in the PCI slot and...
View ArticleFreepbx Installation on ARM
but unfortunately the error is the same. does dahdi have effect on it? because i did not install it. i only installed asterisk and freepbx.thanks
View ArticlePBXact 100 not detecting A400 FXO card
[root@MTE-RAN-PBX01 ~]# lspci00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC T ransaction Register (rev 0e)00:02.0 VGA compatible controller: Intel Corporation Atom...
View ArticlePBXact 100 not detecting A400 FXO card
(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)
View ArticleHow to configure cisco 8961 with sip firmware 8961.9-3-2-10
HiIs there anyone working xml file? (8961)
View ArticleHow to configure cisco 8961 with sip firmware 8961.9-3-2-10
For what these lines <sshUserId>admin</sshUserId> <sshPassword>password</sshPassword>
View ArticleAuto dialing a number
Hello everyone, this is my first post. Currently using free PBX v2.11.0.42 in our office. Yes I know its old but has worked well and our early upgrade attempts went wrong and we had to wind back so...
View ArticleFresh SNG7 install, DAHDI fails to load
Fresh install of SNG7 (12.7.3-1707-2.sng7), DAHDI fails to start with following error [root@freepbx ~]# fwconsole restartRunning FreePBX shutdown... Stopping UCP Node...
View ArticleAuto dialing a number
I did find this post... striker24x7.blogspot.co.uk Click to Dial or php API to dial from asterisk "vicidial" "goautodial" "asterisk" "digium" "dahdi"
View ArticleFreePBX / PBXACt for a new Hotel
Hello, A new Hotel with 45 Rooms wants a PBX Solution. I dont know if FreePBX is the right for this project. I know there is a Hotel Wakeup module, but how can they bill the customer for external...
View ArticleRepeat IVR recording
Zactly, set the timeout to zero, and set the timeout destination to the next IVR.
View ArticleHow to configure cisco 8961 with sip firmware 8961.9-3-2-10
Hi Juni, Try this...<?xml version="1.0" ?> SIP root cisco M/D/YY India Standard Time 192.168.1.1 Unicast Primary-ServerIP_1 5060 true 5060 TEST-LAB {line_loop} 9 Primary-Server...
View ArticleI can not use Voicemail - Error
The \ var \ spool \ asterisk \ voicemail \ folder did not contain the "device" folder. The folder was added, the permissions on the directory were fixed-the problem was solved
View ArticleUpgrade to FreePBX 14 from 13 failing
Anyone got any idea why '/etc/init.d/dahdi status' and 'systemctl status dahdi' would give different results on boot? I thought this was the smoking gun!
View ArticleFailover Internet Programming
Yes sir. Two wan connections coming in for redundancy. If I stick with a single WAN IP in my Chan_Sip Settings I get one way audio and dropped calls when WAN2 takes over. Is it as simple as activating...
View ArticleFailover Internet Programming
mvogel4949: Is it as simple as activating the DDNS in System Admin Pro and putting that in for my Dynamic WAN IP in Chan_SIP? Yes, it should be. Keep in mind that updates run at most, every 15 min so...
View Article[FreePBX 13] Fresh Install Driver Not Found
Guys, I've got problem when do fresh install FreePBX 13 (10.13.66-64bit) with Asterisk 13 (latest download from website).. Got error "driver not found" message with option select driver, select driver...
View Article