WebRTC browser calls FreePBX 13 (Stable)
OK, due to chrome making the change listed here recently...
View ArticleSome extentions are unable to receive calls from other extensions
I don't know what the proper settings are on Yealink phones. If some phones work fine and others don't, and they're all configured the same with the same extension settings, I'm less inclined to...
View ArticleSome extentions are unable to receive calls from other extensions
In order to help diagnose this, I'd try moving the phones that don't work to locations that do work and vice versa. If the problem follows the location, rather than the physical phone, that strongly...
View ArticleFreePBX 12 w/ Asterisk 13 - TLS/SRTP
No sorry, DTLS is a totally separate feature. That requires devices end-to-end to support such encryption. What you are most likely looking for is TLS over SRTP. You can't really do this over the GUI;...
View ArticleClik here to view.
Some extentions are unable to receive calls from other extensions
Yesterday I tried to decrease both values that you've suggested me for 2 extensions/phones, but after restarting devices, they works for a while and then both stopped working So, you're telling that...
View ArticleUCP not saving modifications in active directory authentication mode
Works Tested today! Much appreciated.
View ArticleClik here to view.
Need to give password for the extensions without being noticed by third party
Hi guys, I'm new to pbx with limited technical knowledge , when I was searching for a way to give password for the outgoing calls I came accross with an option called pin set , where it worked pretty...
View ArticleFollow Me Not Calling - Question
For some reason "Follow Me" stopped calling the numbers in the follow me (hunt) list. What things in the settings would cause the "Follow Me" feature to stop calling the numbers. I have started from...
View ArticleFollow Me Not Calling - Question
Follow-me can be enabled or disabled. Assuming it is enabled, we will probably need to see the log entries of a failed call.
View ArticleProblem with the SSL CA cert
I have Cents 6.5 A)I keep getting this error when I try to update via module admin2015-12-22 16:09:41: (FreePBX-HA) HA Detected: Enabling Maintance Mode2015-12-22 16:09:41: (6.12.65-31) Requesting...
View ArticleHA installation ISO
Hello.I have a server with 1.2Tb HDD but when I install iso FreePBX with "HA Install". Centos takes on HDD only 300Gb. How can I increase space on HDD for system.
View ArticleHA installation ISO
That is correct as when you activate your HA license it will create the rest of the disk inside the LVM setup. If you are not going to purchase and use HA then install without the HA option and it...
View ArticleClik here to view.
CertMan update Error, Where does this stand?
Capture.PNG772x239 14.9 KB WebRTC is listed as disabled waiting for CertMan update and is locked and can't be altered. So, we have a fatal circle. I think I need a good cry.
View ArticleClik here to view.
Need to give password for the extensions without being noticed by third party
this would be 100% on your phone.... that said I don't think any phone lets you turn it off
View ArticleNeed to give password for the extensions without being noticed by third party
You could look into PINSETs, and Pinless dailing http://wiki.freepbx.org/display/FPG/Pin+Set+Pro-Admin+Guide
View ArticleNo ringback when forwarding offsite
If anyone can help with this or has seen a similar issue I would appreciate it.
View ArticleSome extentions are unable to receive calls from other extensions
If the problem only started after an upgrade, I'd suspect that something went wrong with the update and you should downgrade or reinstall. When you swapped devices, did the problem follow the device...
View ArticleTens of extension
I have to prepare just in sti days a switchboard with about 90 internalIs there a way to create them quickly and not one by one?
View ArticleNo ringback when forwarding offsite
I have not encountered this and don't know if it will work, but you might investigate setting: progressinband=yes for the trunk.
View Article