Email configuration for Office 365
Hi! What @waldrondigital posted essentially comes from https://wiki.freepbx.org/display/PPS/Setup+Postfix+Manually It's just people don't realize this is something they, at least currently, have to do...
View ArticleSteps to getting FreePBX to work with Office 365 email
Steps to getting FreePBX to work with Office 365 email Using the Commercial System Admin module makes this a bit easier. It would still be possible to do this without the Commercial System Admin...
View ArticleEmail configuration for Office 365
I hope this can help: Steps to getting FreePBX to work with Office 365 email Thanks.
View ArticleEmail configuration for Office 365
Nice. I could seriously use a beginning to end how to guide. A definitive guide would have saved me, and I'm sure many others countless hours of frustration. I'll be on the lookout for it.
View ArticleEmail configuration for Office 365
Yep! Read the post just above yours in this thread, I have just posted my write up.
View ArticleInclude RPID in first Ringing (180) sent to trunk
Well first the CallerID is from the person calling and therefore part of the INVITE. A 180/183 is a REPLY from the PBX, the PBX would not be sending back CallerID in a reply because that's really not...
View ArticleSend mp3 in voicemails with FreePBX 14
This post is an update to "Send mp3 voicemails with FreePBX 13" An updated sendmailmp3 script that will work in FreePBX 14 (and 13, but you have to install lame). With 14, lame and sox are included in...
View ArticleEmail configuration for Office 365
Thank you for putting the writeup together. I completed all the step on your write up. I am now getting: Sep 24 00:10:09 freepbx postfix/smtp[6482]: AB2F462ABF38: SASL authentication failed; cannot...
View ArticleClik here to view.
Email configuration for Office 365
Check your /etc/postfix/main.cf Do you have smtp_generic_maps = hash:/etc/postfix/genericsmtp_sasl_auth_enable = yessmtp_sasl_password_maps = hash:/etc/postfix/sasl_passwdsmtp_sasl_security_options...
View ArticleClik here to view.
SIP Trunk Providers
Have be using freevoipdeal and frynga for some time now. They have a lot of names, with a lot a different prices. Very cheap prices
View ArticleSIP Trunk Providers
Good writeups here. My 2cents on Flowroute, I have to say their T38 support is awesome and rock solid. Sounds like @Marbled is on to them as well for faxing. Worth considering if fax is essential. I...
View ArticleBilling for PBXact
For PBXact? No. You are talking about a business PBX appliance not a hosted voice/VoIP service platform. Yes, you can use A2Billing or any other Asterisk based billing solution I'm sure on the system...
View ArticleBonding and using System Admin
Well, how often do you need to make changes? Doesn't seem like something you'd be making changes to on a regular basis. However, the answer is no you cannot do this via the System Admin GUI without...
View ArticleRequest 'INVITE' from XXX failed - No matching endpoint found
Hi, I made a fresh installation from FreePBX Distro ISO. The installation is in an internal (private) LAN and have a trunk configurated with outbound and inbound routes.For now I use a softphone...
View ArticleSend mp3 in voicemails with FreePBX 14
I have used this script as a basis for something else, and I found that VM notifications without attachments would fail to send. Anyone else who has the same issue may be able to resolve by modifying...
View ArticleExtensions thru PfSense VPN
I have two locations connected via PfSense (firewall) IpSec VPN tunnel. Location "A" has my FreePBX box behind it and location "B" has two IP telephone extensions behind it. Everything was working...
View ArticleRequest 'INVITE' from XXX failed - No matching endpoint found
Very strange, the softphone registration password works since it can receive calls, but the Invite password fails. Try a different phone and see if the same thing happens.
View ArticleInclude RPID in first Ringing (180) sent to trunk
A 180/183 is a REPLY from the PBX, the PBX would not be sending back CallerID in a reply because that's really not how it works As far as I see in SIP debugs it works during local calls - first...
View ArticleInclude RPID in first Ringing (180) sent to trunk
Hello @LamerDrv, Read this article as well. It will help you to understand more the issue: https://wiki.freepbx.org/display/FOP/Cisco#Cisco-sip_custom_post.conf Thank you, Daniel FriedmanTrixton LTD
View Article