System updates gets exception even after reboot
Maybe the drivers are installed in the wrong directory?This guy had the same problem in the past: https://issues.freepbx.org/browse/FREEPBX-6082
View ArticleClik here to view.
System updates gets exception even after reboot
Hi! carpenter: Maybe the drivers are installed in the wrong directory?This guy had the same problem in the past: https://issues.freepbx.org/browse/FREEPBX-6082 Thank you but they are actually missing...
View ArticleClik here to view.
System updates gets exception even after reboot
OK, editing the grub config file to choose the previous kernel offered works... I don't have time to debug this more tonight to see if anything can be done... Those Sangoma Wanpipe drivers are...
View ArticleSystem updates gets exception even after reboot
Hi! I created the following ticket: Latest system updates (October 2017) breaks Wanpipe drivers. Have a nice day! Nick
View ArticleDracut Emergency Shell.../dev/root does not exist...dracut:/#
HiOn the 64Gb USB.Should I use a separate USB as the installation source?ThanksCompused
View ArticleDracut Emergency Shell.../dev/root does not exist...dracut:/#
No but on the system you are installing it too, either virtual or real, will need a hard drive that the installation understands Please be more forthright on how you are installing it on what system,
View ArticleDracut Emergency Shell.../dev/root does not exist...dracut:/#
Was hoping to use the 64Gb USB, as the 'drive'. I've copied the distro onto this USB, but it goes into 'emergency mode' with a 'dracut#' prompt. Could anything in the 'kickstart' folder be modified to...
View ArticleClik here to view.
Dracut Emergency Shell.../dev/root does not exist...dracut:/#
compused: Could anything in the 'kickstart' folder be modified to overcome this? You really need a real hard drive to do this.
View ArticleT1 voice line (AT&T) how to set PRI
Greetings, (also x-posted in digium section) I have a Digium TE121 card and a T1 8 channel service from AT&T. I cannot get the settings right in FreePBX. AT&T gave me settings for the circuit...
View ArticleDracut Emergency Shell.../dev/root does not exist...dracut:/#
If you try to install to the same device as you install media, then you will break everything, If another USB device is mounted also then good luck, it might work, but I will assure you that running...
View ArticleDracut Emergency Shell.../dev/root does not exist...dracut:/#
...from too many reads & writes?
View ArticleInclude RPID in first Ringing (180) sent to trunk
May be this will help somebody.Solution for my problem is to remove "r" letter from Settings -> Advanced Settings -> Asterisk Dial Options.Default value for this setting in FreePBX is "Ttr".
View ArticleURL forward
Hi, I want to forward my entry calls to an URL instead an extension when I'm out of office. I could know the ip of the phone but I can't change the phone config to add to my PBX. In other words, when...
View ArticleCan't connect Zulu's softphone
DAMN!! After upgrade to Asterisk 13, it seemed to work the first hour, but now, some modules are stoped: restapps, uco, xmpp and zulu. This what i get in the log: http count exceded on 1000 sesions....
View ArticleExport extensions, users and queues from freepbx 13 to 14
Hi all! Does anyone tried to export/import extensions and queues from freepbx 13 to 14? Does it work properly? Regards
View ArticleT1 voice line (AT&T) how to set PRI
Those are all settings that must be defined in the DAHDI config files. The a look at the following link and use it just as a starting point, but be aware that you must use the info that AT&T...
View ArticleError[6641] chan_sip.c:4273 Serious Network Trouble; __sip_xmit returns error...
We are suffering this error. Any idea to solve this? I've heard about trunk configuration, but it's the same config we use in all freepbx machines we have in production, and this error is not present...
View ArticleURL forward
Create a new extension of type 'custom' with a dial string like: sip/extension@ip_address then forward calls to this extension.
View ArticleClik here to view.
Can't connect Zulu's softphone
fetoa: http count exceded on 1000 sesions. Browse to Settings, Advanced Settings and increase the http "Session Limit" to a higher threshold.
View Article
