Clik here to view.
System updates gets exception even after reboot
chaser: Before the big update a few days ago, DAHDi would only start if I did a service dahdi start, then fwconsole restart. I don't know what version of dahdi & wanpipe I was running at this...
View ArticleSystem updates gets exception even after reboot
Yikes, I take too much time to write these posts, both of you had time to post in the mean time.... Have a nice day! Nick
View ArticleClik here to view.
System updates gets exception even after reboot
Ok. Without any modifications, chkconfig --list | grep -i dahdi gives the following: [root@freepbx ~]# chkconfig --list | grep -i dahdi Note: This output shows SysV services only and does not include...
View ArticleClik here to view.
System updates gets exception even after reboot
chaser: Does that look right? Your system was the result of an upgrade or a new install? I thought it was an upgrade but my upgrade has /etc/init.d/dahdi which chkconfig "sees" and which does not...
View ArticleClik here to view.
System updates gets exception even after reboot
Marbled: Your system was the result of an upgrade or a new install? I thought it was an upgrade but my upgrade has /etc/init.d/dahdi which chkconfig "sees" and which does not appear to be present on...
View ArticleDetecting Original distination number on incoming forwarded call
I can almost guarantee you that the Wireless provider will not prove that call information to you when a call is forwarded to your flowroute DID.
View ArticleClik here to view.
System updates gets exception even after reboot
chaser: An upgrade, but a stalled upgrade (stalled when updating http.d, if I recall), which has then required a few subsequent 'fixes' along the way. I think this was why I had to do the 'weak...
View ArticleSystem updates gets exception even after reboot
I just made a little edit above, about wanrouter. It still seems to run, even though I've disabled it through chkconfig. I think it might also be getting started by fwconsole? Done a few reboots and...
View ArticleClik here to view.
System updates gets exception even after reboot
chaser: Interestingly, wanrouter is still reporting errors when I do a fwconsole restart, even though I disabled wanrouter startup through chkconfig.: It's disabled from starting at boot but one of...
View ArticleSystem updates gets exception even after reboot
Thanks for your help, and I'm sorry you've not been able to get your system working properly yet. Hopefully some of the work we've been doing here will give the devs some pointers.
View ArticleSystem updates gets exception even after reboot
Wanrouter should not be chkconfig on. It gets started from fwconsole.
View ArticleClik here to view.
System updates gets exception even after reboot
chaser: Thanks for your help, and I'm sorry you've not been able to get your system working properly yet. You are welcome and don't worry, except for a slower boot than it should I am pretty lucky...
View ArticleClik here to view.
System updates gets exception even after reboot
Hi Tony! tonyclewis: Wanrouter should not be chkconfig on. It gets started from fwconsole. I actually tried that with my Sangoma A200 when I saw that it fixed thing for him and knowing some...
View ArticleClik here to view.
Upgrade to FreePBX 14 from 13 failing
Right. I think we've got this sorted now. Discussion had moved to another thread for some reason, but the solution was fairly straight forward in the end! System updates gets exception even after...
View ArticleClik here to view.
System updates gets exception even after reboot
OK, what I just said is not entirely accurate... My system becomes available a lot faster, actually before the freepbx service has finished doing its job... It's too early to say before I do more...
View ArticleClik here to view.
Upgrade to FreePBX 14 from 13 failing
chaser: Turns out this probably was the real fix... Not to start it at boot I think is but not the way I suggested you do it temporarily for now... The Wanpipe scripts are actually setting things up...
View ArticleSystem updates gets exception even after reboot
Ok, and it turns out that I'm still having some problems too. DAHDi now consistently starts on boot (so far, anyway), but fwconsole restart has a 50/50 chance of throwing a dahdi error: [root@freepbx...
View ArticleClik here to view.
Can't upgrade to FreePBX 14 due to iSymphony remnant
┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓┃ ┃┃ Sangoma 6 to 7 Upgrade Tool ┃┃ ┃┃ Distro Upgrade - Version 1707-17.sng7 ┃┃ Build Date: 2017-08-23 ┃┃...
View ArticleClik here to view.
System updates gets exception even after reboot
Now you see why I am so insistent about testing things multiple times, under different conditions... There seems to be quite a few things involved in having this works correctly consistently... In my...
View ArticleTwilio Inbound route calles get “the number you have dialed is not in service”
I got it working now I can make and receive call from asterisk. Now I have an ext on cucm 1000 how can I forward all incoming calls to that ext. also when I try to call from cucm an outbound number it...
View Article