Extension Module Port Setting
6.12.65-31I have changed the port setting in the extension module but have not been able to connect using that new port. My router forwards the port to FPBX and the phone is set to the new port. Is...
View ArticleClik here to view.
Voicemail setting glitch in device and user mode
mulderlr: That's not good. So, we can't even get freepbx to reliably write out basic sip config file accurately in device and user mode and its shrugged off as unsupported? No. I did not say that. We...
View ArticleOpening Extension Config and Pressing Submit - Woops Error
As previously mentioned you can turn off the error reporting/handler in FreePBX and the module would work fine in FreePBX 13. That is the "easy" part. Just turn off error handling all together, it...
View ArticleClik here to view.
Voicemail setting glitch in device and user mode
If you want to keep trying to make it work, best of luck to you. My experience has been that there are many parts of FreePBX that "assume" (that may not be the right word, but its the best I can think...
View ArticleClik here to view.
Opening Extension Config and Pressing Submit - Woops Error
Thanks, I will use that info when I am able to try to upgrade again.
View ArticleVoicemail setting glitch in device and user mode
Thanks for clarifying Andrew, I wish though you would have made some of those comments initially instead of just saying it was not supported especially since that was never my question in the first...
View ArticleRest Apps, BLF, and Asterisk 13 Compatibility?
@Bullfrog, I'm just starting to play with REST Apps on my T46G, I will be watching this closely, as several other threads dealing with PJSIP, and the other on one way audio. Question, which firmware...
View ArticleExtension Module Port Setting
That is not how that setting works. You are still bound to 5060 so you can only register to 5060. You need to change the bind port in sip settings.
View ArticleVoicemail setting glitch in device and user mode
FYI- you can have the same effect as Device & User Mode when using Extension Mode: Create two extensions that you want to be the same. Each should have a private extension number that you will not...
View ArticleCall drops after 25-30 secs when transfered to another extension
I'm going to guess that your Asterisk SIP Settings were not correctly configured. Am I right?
View ArticleVoicemail setting glitch in device and user mode
That is similar if I had more devices than users and not Vice versa. In environments where many users share the same physical phone and need to just log into the device with their user because they...
View ArticleCall drops after 25-30 secs when transfered to another extension
No. The PEER details in the Incoming Trunk settings namely host and fromdomain options were not exactly what our SIP Provider expected from the type of trunks we were using. They have different IPs...
View ArticleClik here to view.
Queue if busy. Voicemail if no answer
I think this is - again - a problem of a "missing" step in the call flow of FreePBX. As discribed in my thread Redirect calls if member of ring group is busy - there needs to be an option to route...
View ArticleVoicemail setting glitch in device and user mode
Mulderlr What kind of phones are you using? The Phone Apps module has full hot desking feature at the device level.
View ArticleVoicemail setting glitch in device and user mode
Also your setup of using adhoc is what alot of modules in FreePBX do not support. Yes under the covers FreePBX always uses devices and users but so many modules assume the device and user are the same...
View ArticleExtension Module Port Setting
Oh, and I assume that would change the port for all SIP devices. What is the extension port setting used for?
View ArticleFreePBX Behind Corporate Firewall Need Specific URLs For Caller ID Superfecta
CallerID Superfecta for FreePBX is a utility program which adds incoming CallerID name lookups to your Asterisk system using multiple data sourcessources I selected:Superfecta cacheTrunk ProvidedTelco...
View ArticleUCP Call History not complete
UCP Call History is not completeWhen I make a call with my extension to a outside nummer, I cannot see that, I only see a arrow to the right -> but in freepbx I can see all the detailed information...
View ArticleVoicemail setting glitch in device and user mode
Mostly older cisco 79x0, a handful of Aastra and a few yealinks. Yes, the aastras and yealink can use the phone apps module, the ciscos... not so much.
View ArticleVoicemail setting glitch in device and user mode
Again, Tony, that's all well and good that adhoc mode might confuse some modules, but it doesn't address the original concern. Surely something as core as a sip config can be written out correctly....
View Article