Intercom on polycom vvx201
Anybody willing to take a stab at this? Ive dug some more and read a few posts that stated I got to edit SIP headers but it seems no one has really gotten any deeper then that.
View ArticleCan't dial a number with whitespace or parens
I'm not familiar with Zulu, but could it be a difference in browser that made it work for him and not for you?
View ArticleClik here to view.
Can't dial a number with whitespace or parens
Nope, the popup/browser doesn't matter. Those only apply on inbound calls. (I also tried leaving those features turned off) These were outbound calls. Data entered directly into the softphone(Zulu)...
View ArticleOutbound calls suddenly stopped
Nice to know you cgot it working, but I don't see how time conditions and time groups affect outbound calls unless you have some funky routing. Also, looking at the outbound routing rules, you seem to...
View ArticleUCP is missing the call forward settings
I had an extension that was setup to user call forwarding at some point and it did not have a user assigned to it, I don't have access to the phone at this time and wanted to unforward it. so I made a...
View ArticleFirst steps to setup - not as easy as I thought!
So, I'm new here but I have many years experience in setting up PBX's; just not Linux/Asterisk based. This system is just not giving me the queue's I'm expecting and posing lots of questions I can't...
View ArticleFreePBX 14.0.1.20 - Unable to connect to the UCP Node Server because: 'Error:...
The Node ports are as defined in Advanced Settings, they need to be accessible from the browser. See:https://wiki.freepbx.org/display/PPS/Ports+used+on+your+PBX
View ArticleClik here to view.
FreePBX 14.0.1.20 - Unable to connect to the UCP Node Server because: 'Error:...
As far as I can tell, this is all setup properly. I even tried disabling the firewall and still get the error message in UCP. 2.png1797x399 33.3 KB
View ArticleClik here to view.
FreePBX 14.0.1.20 - Unable to connect to the UCP Node Server because: 'Error:...
Another SS. 1.png1344x523 50.8 KB
View ArticleRecordings Files 0 bytes
Hello guys, im having problem with my Recent FreePBX Install : FreePBX 14.0.1.14 from Freepbx distro the phone message plays it back perfect, the email attachments have it perfect, just the recordings...
View ArticleFirst steps to setup - not as easy as I thought!
Chan_sip or PJSIP are the asterisk specific "SIP" channel drivers and would be where to start. You should take a look at wiki.freepbx.org and if you create an account at portal.sangoma.com you can...
View ArticleCan't dial a number with whitespace or parens
Hi there. I am the lead developer on both FreePBX and Zulu server. We run any and all strings we get from the originate command through a regular expression parser. We do not however, pass what is...
View ArticlePost Version change - No RTP engine was found
FreePBX 14.0.1.20 / SNG 7 Hello, https://wiki.freepbx.org/display/PPS/Changing+Major+Asterisk+Versions+on+the+Fly I just tried switching Asterisk versions on the fly, from 14 to 13, and now when I...
View ArticleHow to replace running FreePBX server with better hardware?
After two attempts I'm stumped. GOAL : replace running FreePBX server with same software but better hardware We have FreePBX running on a dual core desktop machine. We purchased better hardware (quad...
View ArticlePost Version change - No RTP engine was found
Little more info. Running ls /usr/lib64/asterisk/modules/ -l | grep resrtp__ I get:-rwxr-xr-x 1 root root 131024 Oct 31 15:26 res_rtp_asterisk.so-rwxr-xr-x 1 root root 24640 Oct 31 15:26...
View ArticleKnow about the Intercom Extension information at Receiver Side
I'm not sure what you're trying to do exactly. Which module are you using? Ring group? Follow me? Paging and Intercom?
View ArticlePost Version change - No RTP engine was found
On a 14 or 13 machine from asterisk you should have *CLI> module show like rtp Module Description Use Count Status Support Level bridge_native_rtp.so Native RTP bridging module 0 Running core...
View ArticleHow to replace running FreePBX server with better hardware?
I never had good luck with the backup and restore method in the past. In recent years I have never needed to as I keep everything virtualized, so there is never a need to migrate for hardware. The...
View ArticlePost Version change - No RTP engine was found
Thanks Dicko, Looks like I am missing one:afs1*CLI> module show like rtp Module Description Use Count Status Support Level bridge_native_rtp.so Native RTP bridging module 0 Running core chan_rtp.so...
View Article