Sip.flowroute.com Not Registering
You don't need to shut the whole box down, on the "other box" issue core unload chan_sip to start it again core load chan_sip
View ArticleMultiple Systems Extension
I think your solution is:http://wiki.freepbx.org/pages/viewpage.action?pageId=4161588
View ArticleClik here to view.
Macro for Open door via Intercom
admin: But If I understand the logic, something like this can not be done ? Right? Correct. You can't have one button do two totally different things like that. The proper way to do this is to tell...
View ArticleSend a email when a DID is called?
Ok Editor, Thank you this worked perfect. My only question is can i specify the from email address?
View ArticleRestore from FreePBX 12.0.76 server to a test server - CDR issues
Hi everyone, I’m trying to perform a Restore from a FreePBX 12.0.76 server to a test server. I have done many (many) restores over the years using previous versions of FPBX without any issue....
View ArticleReversecharge
Hi! I see that @jfinstrom committed something which seems to be related to this for the FreePBX 13 Beta but it unfortunately didn't work for me (if the intent was to fix this problem). re:...
View ArticleService Provider
Thank you guys. I choose to go with didforsale. They have unlimited inbound sip trunks and this is what I needed for the amount of calls I am expecting. Its been two month and so far no issues.
View ArticleWebphone not working after upgrade 2.11 > 2.12
Ok, but if i call the normal extension the webphone doesn't ring. I tried with the softphone on and off. BTW the extension is 9999 so the webphone is 999999, in case this matters. I checked the...
View ArticleReversecharge
None of that is appropriate, only ISDN trunks will recognize the reversecharge thingy, given that, few will honor it. Those log entries are basically red-herrings and will have no effect on your other...
View ArticleReversecharge
Hi! I would suggest splitting the test like this: exten => 1235551212,n,GotoIf($["${REVERSAL_REJECT}"!="TRUE"]?post-reverse-charge)exten =>...
View ArticleReversecharge
Again it is a red-herring, SIP trunks don't have that concept, only ISDN, also notice while you waste you time __REVERSAL_REJECT has two underscores at the beginning (there is a difference) , but for...
View ArticleAnyone using a recent SonicWall with Remote Polycoms?
Sadly this didn't improve the issue, still no ringing on extensions for inbound calls. What about putting the phones on a VLAN and putting that VLAN in a DMZ zone on the sonicwall?
View ArticleReversecharge
dicko, instead of saying other waste their time, try it... There's a problem with the test... If you can't bother reading the whole thing then please don't comment... I know it only works for ISDN/PRI...
View ArticleReversecharge
Why would I want to try a spurious test ? I will leave it to you to construct the unnecessary stuff if you want to. Please just ignore those spurious log lines.
View ArticleReversecharge
Because you would see there is an actual problem... We don't have ISDN/PRI trunks... We haven't enabled the reverse charge check.. @jfinstrom has actually tried to fix this, look at the commit he did...
View ArticleReversecharge
It does if you get your bracketing right. Start here http://www.voip-info.org/wiki/view/Asterisk+Expressions
View ArticleReversecharge
Thank you, will do immediately... I had never played with this before... Nick
View ArticleUsing PREROUTING REDIRECT during a SIP port change bad idea or okay?
We've been having trouble with a SonicWall for some remote extensions with not ringing and I'm thinking of trying to put the binded SIP port back to the original 5060 (currently 5080). I was thinking...
View ArticleReversecharge
OK, it works now thanks to the URL you sent me to which pointed to another page which dealt with variables... The problem was not one of bracketing but of underscores... You set a variable with...
View ArticleReversecharge
Nope, doesn't work so it seems my modification is really necessary... I will modify what I posted above to remove those underscores, it works as designed now... If I set it to FALSE I don't get the...
View Article