Anyone have directions on getting a Snom M9 to register, using Endpoint...
I've got everything else going well with this, but I need to set up an M9 phone and its not registering for some reason. I tried setting it up using the Account 1 profile, matching the handset, then...
View ArticleSecuring CloudVPS with new Firewall Module&Responsive Firewall
I have a FreeBPX server and I'm having issues with security, and connections. This is a cloud VPS, so it is not behind a dedicated firewall, so I need to rely on the built in firewall.I've recently...
View ArticleProcedure to install FreePBX 13 on Centos 7
I have installed a FreePBX 13 on Centos 7 using the instructions here before wiki.freepbx.org and it worked like a champ.However I went to do it again and I ran into 2 sections that gave me...
View ArticleClik here to view.
Procedure to install FreePBX 13 on Centos 7
Paiscool: wget http://www.pjsip.org/release/2.4/pjproject-2.4.tar.bz2 this generates a "404" when used.the above wget doesnt work for the new version 2.4.5 Seems to be working fine [root@freepbxdev1...
View ArticleYealink: To VM Button For A Given Extension
Try Setting the key type to DTMF with value of ##* . On my system all I have to do is press the VM button ##* and then press the ext. BLF button or enter the extension. The transfer happens...
View ArticleResponsive Firewall
I am seeing entries like the following in my log: [2016-01-13 15:09:20] NOTICE[4685] res_pjsip/pjsip_distributor.c: Request from '"504" sip:xxx@xxx.xxx.xxx.xxx' failed for 'xxx.xxx.xxx.xxx:5060'...
View ArticleResponsive Firewall
Rob can better explain this and any specifics, but here's the basics. All unknown SIP requests are throttled such that a minimal number of requests per minute will be allowed in. This is the mechanism...
View ArticleEnd Point Manager templates
I definitely have the logo in the right place. It seems my Endpoint manager is not configuring the phones because DPMA is doing it. However I don't see how to configure DPMA to make changes to the...
View ArticleInstallation Problems
Hi Paul,I am sorry about the slow reply, but I have been ill in the past few days. Quick update: I got the Yealink to work. I missed a setting under advanced named RPort. It needs to set to enabled to...
View ArticleYealink: To VM Button For A Given Extension
(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)
View ArticleResponsive Firewall
Also, if you are using responsive, the corresponding services need to be set to 'internal'.
View ArticleResponsive Firewall
Thank you for getting back to me. Your explanation makes sense and it is kind of how I was hoping the firewall would work. I will do some more monitoring, but this is what I am seeing so far: Up to 5...
View ArticleResponsive Firewall
Hi Lorne,Thank you for getting back to me. I am new to FreePBX and so I apologize, but could you please elaborate what needs to be set to internal and where to do so?
View ArticleUser Management Email Password Reset Timeout
I agree that it would be great to extend this a bit, or at least have the option to extend it. I ran into this when I originally created all of my users, and some of them didn't get to the point of...
View ArticleUCP / User Manager > Primary extension not available if additional extensions...
I am running into an issue where if I give a user access to additional extensions in UCP, they lose access to their primary extension. Is this expected behavior? I note that with groups, there is the...
View ArticleResponsive Firewall
Rob will have to pipe in with any details. I'm pretty sure the settings are not configurable, and I know there are initial throttles that back off for shorter periods of time (10 minutes or so)...
View ArticleUCP / User Manager > Primary extension not available if additional extensions...
You need to add ALL extensions. If you don't add the primary linked one then they won't have it. Not a bug.
View ArticleUpgrade/Clean Install issues with FPBX 12 and 13
Figured I'd give a final followup in case anyone else has these problems. In general, I can't recommend using Gentoo for this. It looks like it did create a crontab, but because the asterisk home dir...
View ArticleClik here to view.
Adding or editing entry to basefile duplicates after save in EPM
When adding or editing an entry to the basefile it duplicates the last entry added or edited when you click save. PBX Firmware 6.12.65-31, Asterisk 11.20.0, All modules are up to date Before Save...
View ArticleConnect with remote mysql database
Thank you for the answer. Where exactly is this in Advanced settings? I can't find it..
View Article