Limit the Ring Time
I’m just asking this because there were people who missed it… - did you apply config after making changes? To answer why it’s still not working as configured, you’ll have to provide call logs.
View ArticleSNG7-FPBX-64bit-1712-2 and Hyper-V Server 2016 - Installation never completes
Well, I am going to mark this as solved - although I am not sure this solved it exactly, or if it was a combination of problems that were corrected in leading to fixing it but here goes: My PBX...
View ArticleDigium TDM2400P willl not dial out or receive calls
I brought one of the telco lines over to the PBX today. I called that number from my cell phone. When it’s plugged into the FXO port for the FAX the FAX machine rang (none of the other extensions...
View ArticleClik here to view.
Digium TDM2400P willl not dial out or receive calls
Fax machines generally only answer fax calls, if your fax machine has a “pass through port” to an FXS extension, then plug a phone into it. If you are connecting to a dahdi fxo, then it will answer if...
View ArticleNEED HELP WITH context=from-pstn-e164-us
Hi, 've a problem with formating Incoming CID . When i Call from Handy it always cut the “+” from the Number. My Context is in all config’s >> from-pstn It change nothing when it to something...
View ArticleNEED HELP WITH context=from-pstn-e164-us
The from-pstn context does not manipulate the CALLERID(number) in any way if “Handy” needs a + at the beginning then do that in the Handy trunk , you would need to prepend + to that trunk definition’s...
View ArticleClik here to view.
NEED HELP WITH context=from-pstn-e164-us
hi dicko, thx for answer but i think u mean other thing. The Prefix u meant is for DIALING Numbers, but i meant the Incoming Calls on my Extension (Softphone and Hardware-Phone) shows in Display the...
View ArticleClik here to view.
Digium TDM2400P willl not dial out or receive calls
dicko: Fax machines generally only answer fax calls, if your fax machine has a “pass through port” to an FXS extension, then plug a phone into it. If you are connecting to a dahdi fxo, then it will...
View ArticleNEED HELP WITH context=from-pstn-e164-us
Austrian area code 650 is for cell phones, you need to be able to dial 43650XXX. from your VSP, likely you need to add 00 or strip the initial country code if your VSP needs that, you should consult...
View ArticleNEED HELP WITH context=from-pstn-e164-us
Yap thats right its from Cellphone. its only missing the + infront of the number. when i call from cellphone to our askozia the number was shown with the + so after searching and reading many things i...
View ArticleDigium TDM2400P willl not dial out or receive calls
" . . . .While setting up the PBX, I have ONE telco line to play with. . ." So why are you trying to set up three?
View ArticleNeed to increase available disk space to FreePBX
Hi Dicko, I hope you are still around. Looking to find some help and seems like you know a lot, so here I am bothering with this. BTW not to literate in linux here… I have a freepbx hosted in vultr. I...
View ArticleClik here to view.
NEED HELP WITH context=from-pstn-e164-us
Yes, if you don’t refactor the inbound CID then you get what you get , e164 is not pertinent to from-trunk, it is pertinent if you sent it to from-pstn-e164-us, but you really don’t want to do that...
View ArticleClik here to view.
Digium TDM2400P willl not dial out or receive calls
dicko: " . . . .While setting up the PBX, I have ONE telco line to play with. . ." So why are you trying to set up three? It may have something to do with I’d like to get the PBX working before I pay...
View ArticleDigium TDM2400P willl not dial out or receive calls
So please start over, get the one line working, stop being too clever and worry about MJ later, the Wiki had it all for you, just reread and absorb it. If you have one line, you have one DID, that’s...
View ArticleNEED HELP WITH context=from-pstn-e164-us
ok, understand what u mean. But don’t know what the different chars do. At my search i found an other post from u Inbound E.164 Caller ID - How to change the display format? but i dont understand how...
View ArticleNeed to increase available disk space to FreePBX
basically its a “cant do that safely on a mounted fs” An easy gui way (but lengthy way), is to add a custom os in vultr https://downloads.sourceforge.net/gparted/gparted-live-0.30.0-1-i686.iso mount...
View ArticleClik here to view.
NEED HELP WITH context=from-pstn-e164-us
Sorry but thats what google is for, if you need paid support it’s available indirectly as a link at the top of this page
View ArticleClik here to view.
NEED HELP WITH context=from-pstn-e164-us
its ok no problem so its harder to different the right informations from the *bad OR old informations. Don’t want support to do this for me, would help to understand for future. U gave my some good...
View Article