No dial tone on indial. But phone is ringing
Thanks for the quick answer. I checked that setting and it is set to ring.The strange thing is that all our phones ring OK and everything works, it is just the caller has no dial tone and therefore...
View ArticleUpgrade From 12 to 13 Fail
Does you box have internet access?Do dns resolve correctly. GO to the CLI and ping freepbx.org or yahoo.com
View ArticleNo dial tone on indial. But phone is ringing
Have you tried deleting and recreating the ring group? J
View ArticleIssues with multiple extensions to one endpoint
ok, so I processed the update on the dev server.I upgraded FreePBX from 10.13.66-8 to the current 10.13.66-11 using the sequential update scripts...
View ArticleGetting A PSTN Dialtone On An ATA [SOLVED]
I see this old thread with no answer: How To Get A PSTN Dialtone I have something similar, a couple of Grandstream ATAs. I previously had them misconfigured with extensions pointing at the trunks....
View ArticleNo dial tone on indial. But phone is ringing
yes I have tried recreating but that didn't work. I have now changed Asterisk from 11 to 13 and that seems to have fixed the issue. Thanks for your suggestions
View ArticleWifi SIP Phones
I thought about looking into WiFi, but wanted my choice of phone (Sangoma S500). I didnt want to run Cat5 so I got a Netgear Powerline Ethernet Adapter to connect via my power outlet to my switch and...
View ArticleSame Extension on Multiple Phones
Edit the extension and increase the number of "Contacts".
View ArticleSame Extension on Multiple Phones
That worked, lgaetz. Thanks. And to answer the earlier question about why I wanted to do this there are several different reasons for me. The primary one is I have several employees that have office...
View ArticleNew in FreePBX
what could be then a problem ! i set the network properly but i cant and cant recive calls whiout allowing anony. inbound !
View ArticleWifi SIP Phones
I have the Yealink W52, which consists of a wired (ethernet) base and wireless handsets. It works great.
View ArticleCan i use my personal mobile number and use as an extension in home?
I'm not sure if you want to keep your mobile number on your mobile phone, but I use an Obi200 configured to connect to my mobile phone via bluetooth and to my PBX as a trunk. It lets me receive calls...
View ArticleSOLVED - COS and outbound routes not working as desired [PROBLEM RECONFIRMED]...
SOLVED - there WAS a bug in the Extension routing, this has now been fixed on Changelog - Extension routing13.0.9.1: Allow processing of numbers prefixed with +13.0.8: Hide config options when adding...
View ArticleGetting A PSTN Dialtone On An ATA [SOLVED]
Solved. I created a new outbound route that has only the trunk I am trying to reach in the trunk sequence. I created a dial pattern that would uniquely select this route. In this case a prefix of 99...
View ArticleWifi SIP Phones
That's a DECT phone. Lots of good choices if you want to go that route. I just want a bit more freedom to roam and not be tied to a base.
View ArticleClik here to view.
Wifi SIP Phones
kbocek: Switching Zoiper to TCP got rid of the error Spoke too soon. Got a network error from Zoiper yesterday. So it just is not completely reliable, even with TCP enabled.
View ArticleIssues with multiple extensions to one endpoint
Apparently I'm still on 11.21-2 even after rolling back to Asterisk 11 from 13. The issue I'm having is the step about searching for the lowercase "patch12" and adding a line beneath it. There is no...
View ArticleIs this system feasible?
Hello All, Good afternoon. Please help review the system described below and answer my questions and or proffer solutions as the case may be; Key Points:GSM A: is a pstn (GSM) mobile phone number (...
View Article