CDR Report configuration files location
It is a module, so you might want to try... /var/www/html/admin/modules/cdr You may want to check the license file to see if you are allowed to manipulate, change or use the code within.
View ArticleLine Label/ BLF Help
Well I haven't got it working yet. I am on device and user mode so when I tried setting it up with that, it did not work. I will try next to change it to extension mode and see if it works. I know you...
View ArticleClik here to view.
Active Directory Authentication in User Manager operational questions
tm1000: Also note that it might be pretty buggy (removing a user from AD doesnt remove them from FreePBX [a bug!]), Just to check with others, this bug still exists correct? I sync'ed with an AD that...
View Articlei2c i2c-1: sendbytes: NAK Bailout
FreePBX 12.0.76.2Asterisk 11.19.0Linux 2.6.32-431.el6.i686 My root server has a nagging annoyance that it repeatedly writes this kernel error when logged into FreePBX. It does not appear when I SSH in...
View ArticleLine Label/ BLF Help
Perfect! I have just the solution for you and shared lines are not needed. You need a Queue with Dynamic Agents. Dynamic Agents can log into or out of the Queue. you can program the Queue to Skip Busy...
View ArticleClik here to view.
i2c i2c-1: sendbytes: NAK Bailout
That is a kernel message so ssh connections won't get them but consoles will. There are i2c_? kernel module(s) that read/write to the i2c bus, so you need to find out what is using i2c and fix that if...
View ArticleCisco CP7975G Registration EPM
Hi Jerry, Can you post the config for your 7975G? I have a 7975G that I have working. Along with 3 7970s and 2 7960s. So they do work. Jeff
View ArticleLine Label/ BLF Help
I reread your comment, and I see your complication with wanting to ring one group of people, then the next, then the next You could handle this with QUEUE1 -- Front Desk 1, 2QUEUE 2 -- Front Desk...
View ArticleCisco CP7975G Registration EPM
Jerry, Try going to the phone Web GUI and under "Console Dumps" download the files and search for "Parser" If you find it, it will tell you "XML Parser Error" and tell you what line its config file...
View ArticleCisco CP7975G Registration EPM
Working 7970 config on 8-5-4S: <?xml version="1.0" encoding="UTF-8"?> <device> <deviceProtocol>SIP</deviceProtocol> <sshUserId>admin</sshUserId>...
View ArticleLine Label/ BLF Help
Yes I like the way your first comment with Dynamic Queue is set up. Would you recommend me stay on user and device mode or to move it back to Extensions mode and then just have 1 extension per phone.
View ArticleClik here to view.
Line Label/ BLF Help
I have no experience with EPM maybe someone else will comment on that. For my PBX's I configured the phones and PBX separately.
View ArticleAccess PBX from outside
Hi Celson, I have most of those ASA entries defined. But I'm confused about the two RTP entries you mentioned. I do have those lines for SIP, but nothing for RTP. So I should have a static NAT rule...
View ArticleRemove Inside the Asterisk news on UCP
Can I get rid of the "Inside the Asterisk" news on UCP?My users are not interested and it distracts them. Thanks.
View ArticleRemove Inside the Asterisk news on UCP
Got it."In Advanced settings module in FreePBX you can remove the RSS feeds"
View ArticleGroup SMS?
Has anyone done group SMS? I've looked at the available module but cannot find out if it supports group messaging or not. If it doesn't has what have others used for this? This would be a nice addon...
View ArticleDifferent P-Asserted Number (PAI) to that of the CID
I use extensions_override_freepbx.conf and the following to set my PAI: [macro-dialout-trunk-predial-hook]exten => s,1,NoOp(Adding P-Asserted-Identity)exten =>...
View ArticleMacro-dialout-trunk-predial-hook and PJSIP
Hi guys, I need a specific Contact Header to be sent with every INVITE using PJsip. The problem I have is that the "Contact User" field pjsip has, only gets used for the registration and not INVITEs....
View Article**OSS Endpoint Manager - How to clean up after upgrade to newer phones and...
Hi, I just had a struggle to add a new Polycom SpIp 331 phone to an environment of older SpIp 301 and 501 phones. The process is documented but I made some errors... anyway: It seemed (and this could...
View Article