Need help setting up PRI NFAS
Hi folks, can anybody shed some light on how I can setup my 2 PRI's as a NFAS group on FreePBX? Im running (2) TE110P's and have no problems getting them working as standalone PRI's but I'd love to...
View ArticleNeed help setting up PRI NFAS
http://doxygen.asterisk.org/trunk/chan_dahdi.conf.html explains NFAS usage, but you will probably have to disable the dahdi-helper in FreePBX though as it will likely overwrite your work. (of course...
View Articlei2c i2c-1: sendbytes: NAK Bailout
Well the surrogate server is an HP # Slimline.. did see hits in research that the slimline was vulnerable to this Installed the up to date distro on the main server today (same as on the HP Slimline)...
View ArticleNeed help setting up PRI NFAS
it looks like I'm going to have to do a lot of uncommenting.. yuck. How do i turn off the dahdi-helper? Thanks for the quick reply..
View ArticleCDR Report configuration files location
Thank you.I will try to setup with those files.
View Articlei2c i2c-1: sendbytes: NAK Bailout
Actually it's is not the software running differently, it is software that might be loaded for discovered hardware where the hardware is different and perhaps non-conforming between the hardware.
View ArticleNeed help setting up PRI NFAS
It's a module, so in module administration. But if you look, it's probably only a few lines of addition to what is already working.
View ArticleHacked IVR Security
I am running a FreePBX 2.5.2.2 on Asterisk 1.4.21.2 (in process of setting up a newer system, but have to leave the production server in place for now). We have 24 POTS lines connected with ZAPtel...
View Articlei2c i2c-1: sendbytes: NAK Bailout
Not quite following that statement well but it is after hours here. Thanks to all you guys that make this forum possible.. I think I solved my own problem.. we shall see. CheersS
View ArticleRing group record files to ucp
Hello,I have installed freepbx and asterisk on centos 6. So, I am using Centos 6 64bit, Asterisk 13, Freepbx 12. I would like to see / playback recorded incoming call to ring group from ucp panel.Is...
View ArticleJust Starting with FreePBX: SIP from ISP
This is an OLD topic, but I just set up a trunk with Windstream, and this was helpful, so thank you very much. Also, I would like to add that they requested that we have Asterisk SIP register for this...
View ArticleWhen Will FreePBX 13 move to Stable?
When will FreePBX 13 move from RC to Stable? I want to upgrade but I am nervous that it is still in RC phase and there are still issues. Thanks Blacky
View ArticleRESOLVED: How to register a Cisco 7965 with ver 9 firmware?
Yup, that did the trick for me too. Thanks!
View ArticleCisco CP7975G Registration EPM
Oh, one more thing. I had more troubles again tonight with another Cisco 7945G. For the Extension, make sure NAT = Never Don't ask why, but it works. Don't count on me ever recommending Cisco phones...
View ArticleCisco CP7975G Registration EPM
The Cisco SPA series is actually great with FreePBX, good quality phones, low cost, actual SIP working on latest firmwares, easy to configure using HTTP or XML. my favorite model is the SPA514G...
View ArticleCisco CP7975G Registration EPM
Reilly, I will have to give the Cisco SPA series a good look. I got a few Cisco 7945s donated to me, and I am sure the work great with CUCM and Skinny protocol. I knew right from the get-go I would...
View ArticleFax Settings in Extention
You need to enable fax for the user you created. Create a user, add fax settings to that user.
View ArticleErrors after installing img FPBX version 12 / asterisk Ver. 11.18.0
thanks tm1000. Now no security alert
View ArticleClik here to view.
PDOException on log in
Logged into freepbx this morning to do a daily module update check and got this: I haven't changed anything for a few days, just reporting it so it's known. Should I be concerned?
View ArticleFax Settings in Extention
Did it already, no Fax Recipient option, also the fax module is Enabled...
View Article