Correct string for Phone Apps
Are you not using the Endpoint Manager? It should build the config files for you
View ArticleCisco 9971 phone configuration working example with setup tips
Hi, I just recently switched to freepbx, doing some tests to make sure all works before using it in production with 9971, I'm using the latest BETA – 10.13.66. I purchased the endpoint manager...
View ArticleDashboard, only SIP trunks counted in statistics?
Hi! I noticed that only SIP trunks seems to be counted in the statistics, is that on purpose? I have 2 custom trunks and one "fake" (just for testing if it was counted) IAX trunk and none of them are...
View ArticleDoes PJSIP Support Video?
Hi, I am running FreePBX 13.0.1RC1.30 on Asterisks 13 and setup a couple of JPSIP trunks and extensions but I'm not able to get video to work on the PJSIP extensions, it only works on Chan_sip...
View ArticleCisco 7960 with 7914 sidecar questions
I am a bit new to asterisk/FreePBX. I have 24 7960 phones, which are provisioned, and working properly. My question comes in to configuring the line and soft buttons on the phones, and having them...
View ArticleAMI Action: CoreShowChannels
Example: $fp = fsockopen("localhost", 5038, $errno, $errstr, 30); $out = "Action: Login\r\n"; $out .= "Events: off\r\n"; $out .= "UserName: a****f\r\n"; $out .= "Secret: ma***9\r\n\r\n"; fwrite($fp,...
View ArticleAMI Action: CoreShowChannels
Euh, I hope that this is not your real password... Have a nice day! Nic
View ArticlePhones behind Cisco SPA800 cannot call out
I have a new Cisco SPA8000 with 7 phones behind it. All lines call receive calls from outside numbers and from local extensions. All 7 lines can dial local extensions/voicemail and whatnot but cannot...
View ArticleEndpoints continually register and increase port numbers
Freepbx Distro 6.12.65-30 & Asterisk 11.19.0 - Endpoints are Mitel 6867 sets. We have a number of sets at a branch office and it appears that they keep registering, and as they do they increase...
View ArticleAsterisk and "AMI" to monitor incoming calls
Use PHP scripts to monitor incoming calls by AMI The command is: "Action: CoreShowChannels" The point is that there's always the same UserContext but calls arrive on different numbers registered with...
View ArticleAMI Action: CoreShowChannels
Test server... The point is that I have problems to monitor incoming callsI always enter with the same channel Example:Action: CoreShowChannelsResponse: SuccessEventList: startMessage: Channels will...
View ArticleFreepbx 13.0.2 webrtc supposed to work?
You need to go to advanced settings and see what port the asterisk Web server is rubbing on. I'm only making assumptions
View ArticleClik here to view.
OpenMCU-ru integration with FreePBX
OpenMCU-ru can be installed on FreePBX 12 and earlier distributions but breaks with FreePBX13. During SIP/SDP negotiations, the SIP "contact"information changes from OpenMCU-ru's eth0:0 IP address to...
View ArticleInstalling System Admin on a minimal CentOS 7 system
Is it not possible to install the Sangoma System Admin module on a RHEL7/Centos7 system? I installed a base Centos7 minimal system, following the guide...
View ArticleFreePBX super strange CID issue on internal calling
Just bumping this in hopes someone can lend me some wisdom. Thanks.
View ArticleFreePBX super strange CID issue on internal calling
Hi! Have you tried another SIP phone or maybe a software one like MicroSIP or Zoiper to see if you have the same problem? Another solution would be to monitor the SIP communication with a "sip set...
View ArticleFreePBX super strange CID issue on internal calling
Thank you for the reply! It is not the phones , or so it seems , because this will happen across multiple phones. I have watched calls go through and went through the logs and could never see the...
View ArticleFreepbx 13.0.2 webrtc supposed to work?
Hi Andrew. Thanks for your patience. Asterisk Webserver listens on 0.0.0.0:8088. I'm making a summery for now. I have a user with a linked pjsip extension. The User is allowed to login and webrtc is...
View ArticleFreepbx 13.0.2 webrtc supposed to work?
A litte progress. When i switch to http (from https) i have blue phone and can dial. I then hear one ringtone and after that the call is hung up. Error.log: [2015-10-16 20:45:05]...
View Article