Unable to register SPA303 to FreePBX v 12.0.86.2
Hi...thanks but I created the password myself and it is only 9 characters, The original one had a "!" in it so I removed that and now it is just a mixture of 9 alphanumeric characters.
View ArticleUnable to register SPA303 to FreePBX v 12.0.86.2
The error message on the SPA says "FailedNot reachable"
View ArticleUnable to register SPA303 to FreePBX v 12.0.86.2
Did you work thru the installation steps in the User Guide ?http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/csbpipp/ip_phones/user/guide/30X_sip_user_guide_source/30X_user_guide.pdfDoes your...
View ArticleClik here to view.
File recording name
Hi All,I was requested to make our recordings file names more readable, so after searching the net, I came up with a good result.Which worked for about 2 years, a few months ago I migrated to a new...
View ArticleFreeBBX 12 Asterisk 11 PHPAGI.php Script Executes but Does Nothing
Is your script in the same folder as phpagi.php? If you are editing with windows, make sure your script has unix EOL (end of line).
View ArticleClik here to view.
Fax Settings in Extention
starnetwork: any help / anyone can check this issue? Does the user manager user have an email address?
View ArticleUnable to register SPA303 to FreePBX v 12.0.86.2
Hi! A couple of questions.. Is there a firewall between them? Are they on the same subnet? Did you specify the right subnet mask? Did you specify an IP to connect to the PBX or an host name? If you...
View ArticleFreePBX super strange CID issue on internal calling
Hi! The latest firmware could be buggy so I would not completely discard that the problem could be the phones... If there is a way to test with a different phone (either hardware or software) I would...
View Article$astman originate example?
Context needs to be from-internalChannel needs to be Local/335298@from-internal
View ArticleShut Down Free PBX
Hi, Just to be sure: You only have to reconfigure after an improper shutdown? Not after a normal, controlled one? What do you have to do to reconfigure your cards? Do you have to do something outside...
View ArticleHow to find and remove the already in use extension
trying add ext. 1001 failed due to "already in use: undefined" - how to find and remove the already in use extension, then re-add the extension? (was trying to add but failed, then unable to add any...
View ArticleUnable to register SPA303 to FreePBX v 12.0.86.2
Yes. I have been using this phone on voip.ms for several years. Two lines are registered to VoIP.ms but the third line is the one that won't register to my SIP server
View ArticleUnable to register SPA303 to FreePBX v 12.0.86.2
The firewall on the SIP server is turned off. In fact, "service start iiptables" won't even turn it on. It is stopped. Yes. On the same subnet. The SIP server is 192.168.1.216 and the phone is...
View ArticleUnable to register SPA303 to FreePBX v 12.0.86.2
You can't use telnet to connect to a UDP port, but your underlying problem is that you can't have one host respond effectively to different servers on the same port, neither UDP nor TCP
View ArticleUnable to register SPA303 to FreePBX v 12.0.86.2
Yeah. I was checking around later with netstat and saw it was UDP. I don't quite understand your other statement. By "host" do you mean the phone? On this phone there are three extensions. Ext 1...
View ArticleUnable to register SPA303 to FreePBX v 12.0.86.2
So don't use 5060 to LA tou already know it doesn't work
View ArticleUnable to register SPA303 to FreePBX v 12.0.86.2
Not at the same time on the ame port to two servers, change one
View ArticleUnable to register SPA303 to FreePBX v 12.0.86.2
So I should change it so the Ext 1 and 3 are on 5060 and Ext 2 is on 5061?
View Article