Clik here to view.
Call Transfer and ring, but wont pickup
cynjut: … it is possible to initiate a transfer from the phone that may or may not involve the resources of the PBX. You are correct and I forgot about that. Obihai IP phones (and also ATAs) can be...
View ArticleMitel Phones not getting updated time from Daylight Savings Time
The phone config uses 0 us pool ntp org as the primary time server. And the offset in the config is correct too, it is set for Eastern Time. Daylight Savings Time is also enabled for the phone config....
View ArticleTesting SSH backup for Warm Spare
Look at the last screen shot. I ran the command as the asterisk user.
View ArticleNew Upgrades affecting Sound Quality
Is PBX on-site or cloud? What is this simplest thing with problems? For example, if you dial *43 (echo test), can you hear the instructions clearly? Is the echo messed up? Do calls between local...
View ArticleInitial GUI Password / Root Console Password don't match?
Try “SangomaDefaultPassword” and “sangoma” (without the quotes).
View ArticleClik here to view.
Forward an incoming call to External Auto Attendant
rpatrik: Ok so I was able to get it to dial the number if I leave out the D,( ww1234 ), There should be no comma before or after the argument in parentheses. This is the string I used for testing:...
View ArticleClik here to view.
FreePBX 15 Distro On VM High "Load"
Our new server on FreePBX 15 Distro is still spiking to a load of around 5 for a few minutes about a couple of times an hour. Is this normal? Any suggestions on things to look at and/or tweak? Our...
View ArticleClik here to view.
Testing SSH backup for Warm Spare
But just to make you happy @kgupta1 image.png657×648 43.8 KB
View ArticleConfigurazione gnr con trunk pjsip
Buonasera a tutti, Qualcuno ha esperienza di configurazione GNR100 con trunk PJSIP che richiede nome utente e password? Oppure avete idea di come sia traducibile GNR in inglese per allargare la ricerca?
View ArticleCall is registered but no audio
One-way audio, even when it’s going both ways, is a NAT problem. First, make sure all of your NAT settings are correct. Pay special attention to your Advanced SIP settings. Also, double check the...
View ArticleOnline modules not showing up - trying "fwconsole ma listonline" throws error
It seems @dicko knew exactly which one was causing that error, but now what is causing online modules to not show up?
View ArticleDistro Diag
I had a system do this and it was a bad spot in RAM. Doing a hardware diagnostic might be a good idea as well.
View ArticleSome Work from home IP phones dont register
@wardmundy (IIRC) was the expert on travelinman. If he’s around, maybe he can ask some questions to help you find your problem.
View ArticleClik here to view.
Voicemail and extension behavior question
liorme: is there a way to enable\disable a voicemail by a phone shortcut of some sort? starlet something or any other? Not right now, but you should be able to put something together in a custom...
View ArticleFreePBX 15 Firewall questions
Greetings, I am a system admin that inherited a FreePBX 13 system that has been running rather well over the past few years but in the next few weeks I plan to do an upgrade to FreePBX 15. I’d like to...
View ArticleCan't activate new PBX
Not sure what’s going on here but it’s been happening since yesterday. I tried to activate it, it goes through the normal steps, it says “Install Branding Updates”, and then kicks me out to a page...
View ArticleClik here to view.
Can't activate new PBX
I just found this, looks like the same issue and he’s already tried it from the command prompt. Unable to activate instance from restored image Sangoma Hi, one of my cloud instances was running out of...
View ArticleNAT configuration
Thanks for clarifications. The PBX is certified by an SSL certificate, so i don’t use letsencrypt… in this case port 80 can stay closed, no? The 5060 UDP can be opened only from IP of the ISP? Or it’s...
View ArticleClik here to view.
Can't activate new PBX
I can make new Zend IDs but it still doesn’t work and when the popup inevitably comes back it finds the first one. I then went to /etc/sangoma and tried just deleting everything and while the PBX now...
View ArticleDigium phone modules firmware download issue
This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.
View Article