Clik here to view.
SIP trunks not re-registering after failing
BradFacer: I upped the “max retries” from 10 to 1000, hoping that maybe the 10 was too quick for the network to come back Set maxretries to 0 to never stop trying.
View ArticleHotel Wakeup V.13.0.9
As mentioned, that is what paging pro can do. You can also jsut cron a call. 0 10 * * 1-5 /usr/sbin/asterisk -rx "channel originate local/5197@from-internal application playback...
View ArticleAll the modules except framework and sysadmin shows Enabled; Not available...
Is your PBX behind some sort of a proxy?
View ArticleRecorded audio is choppy with openvpn
hello Dears, I have a problem with recorded calls. endponint 1 uses openvpn connection to my Fortinet Firewall then register itself to freepbx endpoint 2 uses local netowrk behind the firewall and...
View ArticleChan_sip.c: Got SIP response 503 "Service Unavailable" back from
Confirm that incoming calls work ok, Stage Method is set to 1, and Dial Plan permits and does not alter the called number (the default should be fine). The 10 second delay before the 503 leads me to...
View ArticleFreePBX 14 unable to start Asterisk 13, segfault, AMI failed, continual...
Hi FreePBX team, On our production server we currently have installed Asterisk 13.13-cert6 with FreePBX 14 on Debian 8.11. We need to upgrade asterisk to version 13.38.0. Therefore I have setup a...
View ArticleClik here to view.
SIP trunks not re-registering after failing
If you have a static (or de facto static) IP address and your provider supports it, use IP authentication instead of registration. BradFacer: I upped the “max retries” from 10 to 1000 … Strange; I...
View ArticleHow to prevent from forwarding a call to an external number?
Can this only be done by changing macros (replace caller id on redirection)?
View ArticleCall forward indication on the Grandstream phone GRP2613 after rebooting phone
Hello All! Does anyone have any ideas? I use Grandstream GRP26xx series phones with freepbx 15, and use feature codes (not local codes of phone) to set/unset call forward. After set/unset call...
View ArticleFreePBX 14 unable to start Asterisk 13, segfault, AMI failed, continual...
Probably a hardware issue. Maybe a failing disk or ram module?
View ArticleClik here to view.
Rocky Linux. CentOS successor?
I read this AM and thought a few of you might find this of interest as well. ZDNet Goodbye CentOS, hello Rocky Linux | ZDNet Red Hat is transforming CentOS into a DevOps-friendly, leading-edge rolling...
View ArticleCID Superfecta SFDatabase module
Hello, I have the same topic als a user last year. Is there any solution? https://community.freepbx.org/t/cid-superfecta-sfdatabase-module/63543 I am playing around with this module to connect to...
View ArticleRocky Linux. CentOS successor?
There’s an active discussion going on: https://community.freepbx.org/t/freepbx-and-centos-base-centos-is-dead-from-now-on/72014?u=pitzkey
View ArticleFreePBX 14 unable to start Asterisk 13, segfault, AMI failed, continual...
Try this https://www.memtest86.com/
View ArticleHow to prevent from forwarding a call to an external number?
There are multiple ways to do this. You should start with the commercial module extension routes.
View ArticleFreePBX 14 unable to start Asterisk 13, segfault, AMI failed, continual...
I have tested this setup on a mac host with vmware and on a linux host with virtualbox. So on both machines i should have a hardware issue? And i have also tested a clean 13.38.0 / freepbx setup on...
View ArticlePjsip options on how to display firmware and device info?
You can still do something similar to gather that information. asterisk -rx “database show registrar” | cut -d, -f7,12 Results will be the endpoint and user_agent info....
View ArticleEndpoint Manager - Addition of new Yealink endpoints
Any chance of certifying the Yealink EXP50? I did put a feature request in for that.
View ArticleFreePBX 15 Unable to Activate
This time it was routing. That was the issue for me. Once I corrected that, we were activated.
View Article