[Fixed] Upgrade failed - UCP Node Server 13.0.9 to 13.0.11
Rob, Yes, Sir, that did the trick! Thank you. UCP Node Server is now updated and installed.
View Article[Fixed] Upgrade failed - UCP Node Server 13.0.9 to 13.0.11
Or just remove the .npm directory all together and let it recreate it. Or run install as root.
View ArticleIncomming Calls will not be processed
Hello Everybody I need your help. I am setting up a FreePBX-Installation and it works fine, but i dont get the incomming calls to work. I tried every combiination, i could find in the internet or i...
View ArticleAfter upgrade to FreePBX 12 outgoing calls are no longer recorded
I have the exact same problem but it was not after the upgrade. Tried deleting and rebuilding the extension but still nothing
View ArticleFrequent unregistering of Gigaset N510 IP Pro Dect Base
Equipment:Gigaset N510 IP Pro Dect Base station plugged into Netgear gigabit poe switchFreePBX 2.10.1.19 running on a physical Asus EeeBoxAsterisk 1.8.3 on CentOS 5.5CSF firewall on box as well as...
View ArticleThe ongoing Firewall Saga! (2nd Post has status)
Just want to be sure I'm not missing something... So the new 5-minute "Safe Mode" means that anyone launching a DDOS attack that crashes your server gets a free pass through your firewall after it...
View ArticleIncomming Calls will not be processed
Hello, Are you sure you have setup your NAT rules correctly? you need to configure port forwarding of UDP ports 5060 and UDP 10000-20000 to the PBX. After that make sure that you setup correctly your...
View ArticleThe ongoing Firewall Saga! (2nd Post has status)
Glad to see such a respected member of the community is testing out beta software and working to improve the user experience. All feedback is valuable and helps us improve. This is the great thing...
View ArticleIncomming Calls will not be processed
Hello Daniel Thank you for your Answer. What i can see, is the Portforwarding correct. Otherwise i could not see the Call with TCPDump on the PBX-Server. The Default-Gateway is set up and it works...
View ArticleThe ongoing Firewall Saga! (2nd Post has status)
Works exactly as expected. Server crashes. Server reboots. Bad guys get a 5-minute free pass through the disabled firewall. Glad you have a sense of humor about it... so far.
View ArticleShut Down Free PBX
Hello all ,@dicko the file has been edited as documented " for the digital card, the link you sent to me " however the cards still loosing configuration each time the system is power off or reboot,you...
View ArticleThe ongoing Firewall Saga! (2nd Post has status)
How did you make the server crash? Can you provide steps to reproduce this attack vector?
View ArticleDID Logic + FreePBX behind NAT
Hi, I am very new to FreePBX and am trying to setup a DDI Logic trunk. My problem is that all the registration requests FreePBX sends to DD Logic time out. This is the outgoing envelope (fifth...
View ArticleIncomming Calls will not be processed
Hi Remo, You do not have a publc ip but a static ip, so you should change to that and fill in your external ip and your local networks.Please provide the log that i have requested and not the tcp...
View ArticleDID Logic + FreePBX behind NAT
Hi, Change your settings in the "Asterisk SIP Settings" module. Select the static IP and try to auto configure it. If it fails, set it manually and apply the settings. Thank you, Daniel...
View ArticleRdestapps deamon permission denied
Just upgraded from 12 to 13. The dashboard shows a triangle next to the RestAppd Deamon. hovering over it brings up the message: sh: /var/www/admin/modules/restapps/check-restapps.sh: Permission...
View ArticleClik here to view.
Incomming Calls will not be processed
Hi Daniel Thank you for your Answer. I checked it with the Static IP, but without success. Please see below the Debug-Log from Asterisk. This log represents one incomming call. [2015-11-10 17:36:07]...
View ArticleShut down warm backup server via SSH
This sounds like the best solution, but my UPS is a Cyberpower, not APC. Will it still work with Cyberpower? It seems like that documentation is for APC.
View Article