This is exactly what a lot of people are looking for. Is there any chance of getting a walkthrough/tutorial from you on how to set this up? This opens up a massive amount of possibility. You are probably too busy, but it doesn’t hurt to ask.

we plan to do the test but we cannot now(we have few remote users, 5% of the total users), we faced these troubles multiple times but we never thought this is related to the internet connection, now 1 hour ago when problem happened we figured out it’s related to internet connection,
we will give it try and share the information, thank you

The following modules are disabled because they need to be upgraded:
restart, sangomacrm, xmpp, zulu
You should go to the module admin page to fix these.
I go to module admin but they won’t upgrade.
Zulu shows * The Module Named " Asterisk REST Interface Users " is required, but yours is disabled.

• Requires engine asterisk (>= 13), you have: asterisk 11.19.0
  Asterisk Rest interface users is disabled up to date. Requires engine asterisk (>= 12), you have: asterisk 11.19.0
  CRM says The Module Named " Zulu " is required, but yours is disabled because it needs to be upgraded. Please upgrade Zulu first, and then try again.
  I ran fwconsole ma upgradeall and get
  [root@xxxx ~]# fwconsole ma upgradeall
  No repos specified, using: [commercial,standard] from last GUI settings

Upgrading: restart, sangomacrm, xmpp, zulu
Upgrading restart…
Starting restart download…
Processing restart
Verifying local module download…Verified
Extracting…Done
Module restart successfully downloaded
Unable to install module restart:

• Failed to install Bulk Phone Restart due to the following conflicting module( s): EndPoint Manager
  Updating Hooks…Done
  Upgrading sangomacrm…
  Starting sangomacrm download…
  Processing sangomacrm
  Verifying local module download…Verified
  Extracting…Done
  Module sangomacrm successfully downloaded
  Detected Missing Dependency of: zulu 13.0.54.31.6
  Downloading Missing Dependency of: zulu 13.0.54.31.6
  Processing zulu
  Verifying local module download…Verified
  Extracting…Done
  Module zulu successfully downloaded
  Detected Missing Dependency of: arimanager 13.0.4
  Downloading Missing Dependency of: arimanager 13.0.4
  Processing arimanager
  Verifying local module download…Verified
  Extracting…Done
  Module arimanager successfully downloaded
  Installing Missing Dependency of: arimanager 13.0.4
  Installed Missing Dependency of: arimanager 13.0.4
  Enabling Missing Dependency of: arimanager 13.0.4
  The following error(s) occured:
• Requires engine asterisk (>= 12), you have: asterisk 11.19.0
  Unable to resolve dependencies for module sangomacrm:
  Updating Hooks…Done
  Upgrading xmpp…
  Starting xmpp download…
  Processing xmpp
  Verifying local module download…Verified
  Extracting…Done
  Module xmpp successfully downloaded
  Installing/Updating MongoDB…MongoDB is not installed
  Unable to install module xmpp:
• Failed to run installation scripts
  Updating Hooks…Done
  Upgrading zulu…
  Starting zulu download…
  Processing zulu
  Verifying local module download…Verified
  Extracting…Done
  Module zulu successfully downloaded
  Detected Missing Dependency of: arimanager 13.0.4
  Downloading Missing Dependency of: arimanager 13.0.4
  Processing arimanager
  Verifying local module download…Verified
  Extracting…Done
  Module arimanager successfully downloaded
  Installing Missing Dependency of: arimanager 13.0.4
  Installed Missing Dependency of: arimanager 13.0.4
  Enabling Missing Dependency of: arimanager 13.0.4
  The following error(s) occured:
• Requires engine asterisk (>= 12), you have: asterisk 11.19.0
  Unable to resolve dependencies for module zulu:
  Updating Hooks…Done
  All upgrades done!
  Updating Hooks…Done

I am hitting send. It does have a transfer key as well. I am using Yealink phones

PolycomVVX-VVX_410-UA/5.5.1.15880 was installed via EPM.

I think it was set as a standard in 2005: https://tools.ietf.org/html/rfc4235

I wonder how many manufacturers are following that standard and how many other PBX systems follow it? Is it that manufacturers are adopting it too quickly or that asterisk is slow at adopting it?

It is nice to see Sangoma participating in the forums often. One of the great things about them.

What happens when you press Tran *110 Tran?

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.

https://wiki.freepbx.org/display/PPS/Changing+Major+Asterisk+Versions+on+the+Fly

Yeah, in my reply in the PJSIP thread was that Polycom UC pre-5.6ish had a BLF bug that caused issues. Updating the phones to UC 5.7 or higher (5.8.x is the current) will fix this bug.

The problem with relying on the EPM for your firmware updates is that the firmware packs are never “up to date” as far as current releases. They need to be tested, verified and made sure the changes/fixes/updates don’t break how the EPM templates configure the phones. When someone like Polycom isn’t a “certified partner” with Sangoma this makes it even harder.

UC 5.5 is like 2+ years old and has bugs, like this, that have been resolved in current firmware.

So I have a user who basically has FollowMe to another extension activated all the time.
I’d like to realize a behavior where he only sees missed calls that were not picked up by the FollowMe extension or by his VM.

Now I though this was purely a phone thing (snom D715) but researching a bit it turned out this was normal behavior in previous FreePBX versions…?

OK, so testing the updated firmware on Yealink was on my to-do list before the end of the month but now I’m very curious about this. So I’m going to be moving that up to this weekend/early next week.

My question to everyone is this, how did you configure your Yealinks on firmware 82.0.x or higher? Are both the firmware and the configs handled by the EPM module?

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.

Your system has serious issues. The first one is opcache failure. That’s in the php binary. We can’t control that. The second one is a segmentation violation. Again an issue with php not freepbx.

Hi, please accept my apologizes if some part of my writing was hurting you.
This sound you solved problem? If yes all of us sometimes do wrong things and nothing is wrong about.
Regards.
Roberto

Thanks for quick response. I only have the options for 1.8, 11 and 13Experimental.
1.8 and 13 give error.
[root@xxxx ~]# asterisk-version-switch
Each time you run this script we create a new log file at
/var/log/pbx/asterisk-switch-version which will include the date and time
and what version of Asterisk you had and what version you switched to
Pick the Asterisk Version you would like to change to.
Press 1 and the Enter key for Asterisk 1.8
Press 2 and the Enter key for Asterisk 11
Press 3 and the Enter key for Asterisk 13 EXPERIMENTAL
Press 9 and the Enter key to exit and not change your Asterisk Version
1

You picked asterisk18

Clearing yum cache
Loaded plugins: fastestmirror, kmod
Cleaning repos: base extras pbx schmooze-commercial updates
Cleaning up Everything
Cleaning up list of fastest mirrors

Switching to asterisk18

Loaded plugins: fastestmirror, kmod
Setting up Yum Shell

Setting up Remove Process
Determining fastest mirrors
http://yum.freepbxdistro.org/shmz-os/6.5/os/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - “The requested URL returned error: 404 Not Found”
Trying other mirror.
http://yum.freepbxdistro.org/shmz-os/6.5/os/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - “The requested URL returned error: 404 Not Found”
Trying other mirror.

–> Running transaction check
—> Package asterisk11.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-addons.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-addons-bluetooth.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-addons-core.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-addons-mysql.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-addons-ooh323.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-core.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-curl.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-dahdi.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-doc.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-flite.x86_64 0:11.25.2-1.shmz65.1.53 will be erased
—> Package asterisk11-flite-debuginfo.x86_64 0:11.25.2-1.shmz65.1.53 will be erased
—> Package asterisk11-odbc.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-voicemail.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
–> Finished Dependency Resolution
http://yum.freepbxdistro.org/shmz-os/6.5/os/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - “The requested URL returned error: 404 Not Found”
Trying other mirror.
Error building transaction: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again
–> Running transaction check
–> Finished Dependency Resolution
http://yum.freepbxdistro.org/shmz-os/6.5/os/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - “The requested URL returned error: 404 Not Found”
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again
Leaving Shell

asterisk18 had an issue being installed and did not complete
Review the console logs and resolve the RPM conflict first
echo and rerun this script to try again.
[root@electsys ~]# asterisk-version-switch
Each time you run this script we create a new log file at
/var/log/pbx/asterisk-switch-version which will include the date and time
and what version of Asterisk you had and what version you switched to
Pick the Asterisk Version you would like to change to.
Press 1 and the Enter key for Asterisk 1.8
Press 2 and the Enter key for Asterisk 11
Press 3 and the Enter key for Asterisk 13 EXPERIMENTAL
Press 9 and the Enter key to exit and not change your Asterisk Version
2

You picked asterisk11

Clearing yum cache
Loaded plugins: fastestmirror, kmod
Cleaning repos: base extras pbx schmooze-commercial updates
Cleaning up Everything
Cleaning up list of fastest mirrors

Switching to asterisk11

Loaded plugins: fastestmirror, kmod
Setting up Yum Shell

Setting up Remove Process
Determining fastest mirrors
base | 2.0 kB 00:00
base/primary | 2.5 MB 00:00
base 6402/6402
extras | 1.3 kB 00:00
extras/primary | 6.8 kB 00:00
extras 15/15
pbx | 2.9 kB 00:00
pbx/primary_db | 2.2 MB 00:00
schmooze-commercial | 1.3 kB 00:00
schmooze-commercial/primary | 17 kB 00:00
schmooze-commercial 111/111
updates | 1.3 kB 00:00
updates/primary | 644 kB 00:00
updates 1456/1456
Setting up Install Process

–> Running transaction check
—> Package asterisk11.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
—> Package asterisk11-addons.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
—> Package asterisk11-addons-bluetooth.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
—> Package asterisk11-addons-core.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
—> Package asterisk11-addons-mysql.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
—> Package asterisk11-addons-ooh323.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
—> Package asterisk11-core.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
—> Package asterisk11-curl.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
—> Package asterisk11-dahdi.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
—> Package asterisk11-doc.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
—> Package asterisk11-flite.x86_64 0:11.25.2-1.shmz65.1.53 will be reinstalled
—> Package asterisk11-flite-debuginfo.x86_64 0:11.25.2-1.shmz65.1.53 will be reinstalled
—> Package asterisk11-odbc.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
—> Package asterisk11-voicemail.x86_64 0:11.25.3-1.shmz65.1.123 will be reinstalled
–> Finished Dependency Resolution
Success resolving dependencies
–> Running transaction check
–> Finished Dependency Resolution

================================================================================
Package Arch Version Repository
Size

Reinstalling:
asterisk11 x86_64 11.25.3-1.shmz65.1.123 pbx 4.5 k
asterisk11-addons x86_64 11.25.3-1.shmz65.1.123 pbx 3.6 k
asterisk11-addons-bluetooth x86_64 11.25.3-1.shmz65.1.123 pbx 33 k
asterisk11-addons-core x86_64 11.25.3-1.shmz65.1.123 pbx 27 k
asterisk11-addons-mysql x86_64 11.25.3-1.shmz65.1.123 pbx 37 k
asterisk11-addons-ooh323 x86_64 11.25.3-1.shmz65.1.123 pbx 324 k
asterisk11-core x86_64 11.25.3-1.shmz65.1.123 pbx 2.6 M
asterisk11-curl x86_64 11.25.3-1.shmz65.1.123 pbx 18 k
asterisk11-dahdi x86_64 11.25.3-1.shmz65.1.123 pbx 274 k
asterisk11-doc x86_64 11.25.3-1.shmz65.1.123 pbx 14 k
asterisk11-flite x86_64 11.25.2-1.shmz65.1.53 pbx 7.0 k
asterisk11-flite-debuginfo x86_64 11.25.2-1.shmz65.1.53 pbx 12 k
asterisk11-odbc x86_64 11.25.3-1.shmz65.1.123 pbx 59 k
asterisk11-voicemail x86_64 11.25.3-1.shmz65.1.123 pbx 78 k

Transaction Summary

Reinstall 14 Package(s)

Total download size: 3.5 M
Installed size: 14 M
Downloading Packages:
(1/14): asterisk11-11.25.3-1.shmz65.1.123.x86_64.rpm | 4.5 kB 00:00
(2/14): asterisk11-addons-11.25.3-1.shmz65.1.123.x86_64. | 3.6 kB 00:00
(3/14): asterisk11-addons-bluetooth-11.25.3-1.shmz65.1.1 | 33 kB 00:00
(4/14): asterisk11-addons-core-11.25.3-1.shmz65.1.123.x8 | 27 kB 00:00
(5/14): asterisk11-addons-mysql-11.25.3-1.shmz65.1.123.x | 37 kB 00:00
(6/14): asterisk11-addons-ooh323-11.25.3-1.shmz65.1.123. | 324 kB 00:00
(7/14): asterisk11-core-11.25.3-1.shmz65.1.123.x86_64.rp | 2.6 MB 00:00
(8/14): asterisk11-curl-11.25.3-1.shmz65.1.123.x86_64.rp | 18 kB 00:00
(9/14): asterisk11-dahdi-11.25.3-1.shmz65.1.123.x86_64.r | 274 kB 00:00
(10/14): asterisk11-doc-11.25.3-1.shmz65.1.123.x86_64.rp | 14 kB 00:00
(11/14): asterisk11-flite-11.25.2-1.shmz65.1.53.x86_64.r | 7.0 kB 00:00
(12/14): asterisk11-flite-debuginfo-11.25.2-1.shmz65.1.5 | 12 kB 00:00
(13/14): asterisk11-odbc-11.25.3-1.shmz65.1.123.x86_64.r | 59 kB 00:00
(14/14): asterisk11-voicemail-11.25.3-1.shmz65.1.123.x86 | 78 kB 00:00

Total 1.5 MB/s | 3.5 MB 00:02
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : asterisk11-core-11.25.3-1.shmz65.1.123.x86_64 1/14
Installing : asterisk11-addons-core-11.25.3-1.shmz65.1.123.x86_64 2/14
Installing : asterisk11-addons-mysql-11.25.3-1.shmz65.1.123.x86_64 3/14
Installing : asterisk11-addons-ooh323-11.25.3-1.shmz65.1.123.x86_64 4/14
Installing : asterisk11-doc-11.25.3-1.shmz65.1.123.x86_64 5/14
Installing : asterisk11-voicemail-11.25.3-1.shmz65.1.123.x86_64 6/14
Installing : asterisk11-dahdi-11.25.3-1.shmz65.1.123.x86_64 7/14
Installing : asterisk11-11.25.3-1.shmz65.1.123.x86_64 8/14
Installing : asterisk11-addons-bluetooth-11.25.3-1.shmz65.1.123.x86_6 9/14
Installing : asterisk11-addons-11.25.3-1.shmz65.1.123.x86_64 10/14
Installing : asterisk11-flite-11.25.2-1.shmz65.1.53.x86_64 11/14
Installing : asterisk11-curl-11.25.3-1.shmz65.1.123.x86_64 12/14
Installing : asterisk11-odbc-11.25.3-1.shmz65.1.123.x86_64 13/14
Installing : asterisk11-flite-debuginfo-11.25.2-1.shmz65.1.53.x86_64 14/14
Verifying : asterisk11-curl-11.25.3-1.shmz65.1.123.x86_64 1/14
Verifying : asterisk11-core-11.25.3-1.shmz65.1.123.x86_64 2/14
Verifying : asterisk11-flite-debuginfo-11.25.2-1.shmz65.1.53.x86_64 3/14
Verifying : asterisk11-addons-mysql-11.25.3-1.shmz65.1.123.x86_64 4/14
Verifying : asterisk11-addons-ooh323-11.25.3-1.shmz65.1.123.x86_64 5/14
Verifying : asterisk11-flite-11.25.2-1.shmz65.1.53.x86_64 6/14
Verifying : asterisk11-11.25.3-1.shmz65.1.123.x86_64 7/14
Verifying : asterisk11-odbc-11.25.3-1.shmz65.1.123.x86_64 8/14
Verifying : asterisk11-doc-11.25.3-1.shmz65.1.123.x86_64 9/14
Verifying : asterisk11-addons-11.25.3-1.shmz65.1.123.x86_64 10/14
Verifying : asterisk11-voicemail-11.25.3-1.shmz65.1.123.x86_64 11/14
Verifying : asterisk11-addons-core-11.25.3-1.shmz65.1.123.x86_64 12/14
Verifying : asterisk11-dahdi-11.25.3-1.shmz65.1.123.x86_64 13/14
Verifying : asterisk11-addons-bluetooth-11.25.3-1.shmz65.1.123.x86_6 14/14

Installed:
asterisk11.x86_64 0:11.25.3-1.shmz65.1.123
asterisk11-addons.x86_64 0:11.25.3-1.shmz65.1.123
asterisk11-addons-bluetooth.x86_64 0:11.25.3-1.shmz65.1.123
asterisk11-addons-core.x86_64 0:11.25.3-1.shmz65.1.123
asterisk11-addons-mysql.x86_64 0:11.25.3-1.shmz65.1.123
asterisk11-addons-ooh323.x86_64 0:11.25.3-1.shmz65.1.123
asterisk11-core.x86_64 0:11.25.3-1.shmz65.1.123
asterisk11-curl.x86_64 0:11.25.3-1.shmz65.1.123
asterisk11-dahdi.x86_64 0:11.25.3-1.shmz65.1.123
asterisk11-doc.x86_64 0:11.25.3-1.shmz65.1.123
asterisk11-flite.x86_64 0:11.25.2-1.shmz65.1.53
asterisk11-flite-debuginfo.x86_64 0:11.25.2-1.shmz65.1.53
asterisk11-odbc.x86_64 0:11.25.3-1.shmz65.1.123
asterisk11-voicemail.x86_64 0:11.25.3-1.shmz65.1.123

Finished Transaction

Leaving Shell

asterisk11 has now been verified to be installed

Checking to see if you have g729 installed
G729 is not installed so moving on
Checking to see if you have res_fax_digium installed
res_fax_digium is not installed so moving on
Restarting Asterisk for Changes to take effect with the new version

Please wait…

!!!amportal is depreciated. Please use fwconsole!!!
forwarding all commands to ‘fwconsole’
Running FreePBX shutdown…

RestApps Server is not running
UCP Node Server is not running
Shutting down Asterisk Gracefully. Will forcefully kill after 30 seconds.
Press C to Cancel
Press N to shut down NOW
[============================] 3 secs
Wanrouter: No valid Sangoma Hardware found, if you have no Sangoma cards this is OK
Stopping DAHDi for Digium Cards
DAHDi Stopped
Queue Callback Server is not running
Running FreePBX startup…
Running Asterisk pre from Dahdiconfig module
Wanrouter: No valid Sangoma Hardware found, if you have no Sangoma cards this is OK
Starting DAHDi for Digium Cards
DAHDi Started
Running Asterisk pre from Firewall module
Running Asterisk pre from Pms module
Running Asterisk pre from Sysadmin module
Running Sysadmin Hooks
Restarting fail2ban
fail2ban Restarted
Updating License Information for 86119035
Checking Vpn server
Starting Asterisk…
[-------->-------------------] 1 sec
Broadcast message from root@electsys.local (Thu Nov 8 08:17:16 2018):

Firewall service now starting.

[============================] 4 secs
Asterisk Started
Running Asterisk post from Dahdiconfig module
Running Asterisk post from Endpoint module
Running Asterisk post from Pagingpro module
Running Asterisk post from Restapps module
Starting RestApps Server…
[>---------------------------] 1 sec
Started RestApps Server. PID is 7233
Running Asterisk post from Ucpnode module
Starting UCP Node Server…
[>---------------------------] 1 sec
Started UCP Node Server. PID is 7306
Running Asterisk post from Vqplus module
Queues Pro is not licensed.
Stopping fail2ban: [ OK ]
Ensuring logfiles are presentStarting fail2ban: [ OK ]
Regenerate FreePBX Dialplan for new Asterisk Version
Unable to access the running directory (Permission denied). Changing to ‘/’ for compatibility.
Unable to access the running directory (Permission denied). Changing to ‘/’ for compatibility.
Unable to access the running directory (Permission denied). Changing to ‘/’ for compatibility.
Please update your modules and reload Asterisk by browsing to your server.
Successfully reloaded
[root@electsys ~]# fwconsole ma upgradeall
No repos specified, using: [commercial,standard] from last GUI settings

Upgrading: restart, sangomacrm, xmpp, zulu
Upgrading restart…
Starting restart download…
Processing restart
Verifying local module download…Verified
Extracting…Done
Module restart successfully downloaded
Unable to install module restart:

• Failed to install Bulk Phone Restart due to the following conflicting module(s): EndPoint Manager
  Updating Hooks…Done
  Upgrading sangomacrm…
  Starting sangomacrm download…
  Processing sangomacrm
  Verifying local module download…Verified
  Extracting…Done
  Module sangomacrm successfully downloaded
  Detected Missing Dependency of: zulu 13.0.54.31.6
  Downloading Missing Dependency of: zulu 13.0.54.31.6
  Processing zulu
  Verifying local module download…Verified
  Extracting…Done
  Module zulu successfully downloaded
  Detected Missing Dependency of: arimanager 13.0.4
  Downloading Missing Dependency of: arimanager 13.0.4
  Processing arimanager
  Verifying local module download…Verified
  Extracting…Done
  Module arimanager successfully downloaded
  Installing Missing Dependency of: arimanager 13.0.4
  Installed Missing Dependency of: arimanager 13.0.4
  Enabling Missing Dependency of: arimanager 13.0.4
  The following error(s) occured:
• Requires engine asterisk (>= 12), you have: asterisk 11.25.3
  Unable to resolve dependencies for module sangomacrm:
  Updating Hooks…Done
  Upgrading xmpp…
  Starting xmpp download…
  Processing xmpp
  Verifying local module download…Verified
  Extracting…Done
  Module xmpp successfully downloaded
  Installing/Updating MongoDB…MongoDB is not installed
  Unable to install module xmpp:
• Failed to run installation scripts
  Updating Hooks…Done
  Upgrading zulu…
  Starting zulu download…
  Processing zulu
  Verifying local module download…Verified
  Extracting…Done
  Module zulu successfully downloaded
  Detected Missing Dependency of: arimanager 13.0.4
  Downloading Missing Dependency of: arimanager 13.0.4
  Processing arimanager
  Verifying local module download…Verified
  Extracting…Done
  Module arimanager successfully downloaded
  Installing Missing Dependency of: arimanager 13.0.4
  Installed Missing Dependency of: arimanager 13.0.4
  Enabling Missing Dependency of: arimanager 13.0.4
  The following error(s) occured:
• Requires engine asterisk (>= 12), you have: asterisk 11.25.3
  Unable to resolve dependencies for module zulu:
  Updating Hooks…Done
  All upgrades done!
  Updating Hooks…Done

Selecting 13 gets me this
Pick the Asterisk Version you would like to change to.
Press 1 and the Enter key for Asterisk 1.8
Press 2 and the Enter key for Asterisk 11
Press 3 and the Enter key for Asterisk 13 EXPERIMENTAL
Press 9 and the Enter key to exit and not change your Asterisk Version
3

You picked asterisk13

Clearing yum cache
Loaded plugins: fastestmirror, kmod
Cleaning repos: base extras pbx schmooze-commercial updates
Cleaning up Everything
Cleaning up list of fastest mirrors

Switching to asterisk13

Loaded plugins: fastestmirror, kmod
Setting up Yum Shell

Setting up Remove Process
Determining fastest mirrors
http://yum.freepbxdistro.org/shmz-os/6.5/os/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - “The requested URL returned error: 404 Not Found”
Trying other mirror.
http://yum.freepbxdistro.org/shmz-os/6.5/os/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - “The requested URL returned error: 404 Not Found”
Trying other mirror.
http://yum.freepbxdistro.org/shmz-os/6.5/os/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - “The requested URL returned error: 404 Not Found”
Trying other mirror.

–> Running transaction check
—> Package asterisk11.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-addons.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-addons-bluetooth.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-addons-core.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-addons-mysql.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-addons-ooh323.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-core.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-curl.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-dahdi.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-doc.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-flite.x86_64 0:11.25.2-1.shmz65.1.53 will be erased
—> Package asterisk11-flite-debuginfo.x86_64 0:11.25.2-1.shmz65.1.53 will be erased
—> Package asterisk11-odbc.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
—> Package asterisk11-voicemail.x86_64 0:11.25.3-1.shmz65.1.123 will be erased
–> Finished Dependency Resolution
http://yum.freepbxdistro.org/shmz-os/6.5/os/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - “The requested URL returned error: 404 Not Found”
Trying other mirror.
Error building transaction: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again
–> Running transaction check
–> Finished Dependency Resolution
http://yum.freepbxdistro.org/shmz-os/6.5/os/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - “The requested URL returned error: 404 Not Found”
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again
Leaving Shell

asterisk13 had an issue being installed and did not complete
Review the console logs and resolve the RPM conflict first
echo and rerun this script to try again.

Sorry if this has been gone over before, but imo there needs to be some other options for zulu licensing other than the 2 free users licensing and 20 user license packs. I have a base of customers that have under 20 users, (also a large amount that have more than 20) and I can’t see them purchasing a 20 user license for 10 users. I could see them buying a 10 pack for 8 users, that would be fine but not a 20 pack. For customers that have more than 20 this isn’t really an issue, but for under 20 the licensing model is holding zulu back from getting to these users. Are there any plans to offer single user licenses in the future or maybe 5 or 10 pack licenses? I’d just rather not see the business lost to bria or similar when zulu is so much better.

Looks like you are on an unsupported (end of life) distro. Upgrade to current using the scripts here:
https://wiki.freepbx.org/display/PPS/Updating+FreePBX+Official+Distro

I know Tom, I’m totally agree with you, but it’s not my decision.

I has already spoken with the concerned peoples about that, but they Don’t seem ok with new phone.

So I work on the last setup of the freePBX (trunk and PATTON) and I have proposed to use One of the old SPA-508g with a side-cars to monitor all the extensions and use 8861 to call.

Not the cleanest solution, but the phones cannot be refund so…

Interesting, I did not find this form
If someone knows it I would rather pay a few Euro than having to become crazy …
The fact is that it should then be integrated into my software and then I should access the “API”

I am new to FreePBX but have some basic asterisk knowledge. I am trying to help someone that has an existing FreePBX 14.0.3.6 installation that has been up for a while and was created and managed by someone that is no longer accessible. Basic management is fairly simple but they need to install some Viking intercom speakers in classrooms that cannot be dialed by all phones, only from a select few. They are going to purchase the Class of Service module to manage intercom groups and permissions but as I understand it any extension would still be able to directly dial any of the viking intercom speaker extensions directly and that cannot be modified using the Class of Service module. I was going to modify the extensions_additional.conf file and create a custom context to simply block extension ranges (existing ranges are 2XX 3XX and 4XX and the new intercom speakers will be 5XX) but it appears that cannot be done with FreePBX. I was looking at the Custom Context module which appears to be able to add the contexts to the extensions_additional.conf file but I cannot figure out how to properly configure it via the GUI. Can anyone give me any pointers here or possibly help with an easier way to get this done?