I attach new log perhaps more consistent
I continue to have the problem by dialing the function by hand while using AMI the call does not start informing that the number does not answer and only happens with this number …

[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [01431975875@from-internal:1] Macro(“SIP/60-00000115”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:1] Set(“SIP/60-00000115”, “TOUCH_MONITOR=1578664315.285”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:2] Set(“SIP/60-00000115”, “AMPUSER=60”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:3] GotoIf(“SIP/60-00000115”, “0?report”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:4] ExecIf(“SIP/60-00000115”, “1?Set(REALCALLERIDNUM=60)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:5] Set(“SIP/60-00000115”, “AMPUSER=60”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:6] GotoIf(“SIP/60-00000115”, “0?limit”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:7] Set(“SIP/60-00000115”, “AMPUSERCIDNAME=60”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:8] ExecIf(“SIP/60-00000115”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:9] GotoIf(“SIP/60-00000115”, “0?report”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:10] Set(“SIP/60-00000115”, “AMPUSERCID=60”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:11] Set(“SIP/60-00000115”, “__DIAL_OPTIONS=Ttr”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:12] Set(“SIP/60-00000115”, “CALLERID(all)=“60” <60>”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:13] GotoIf(“SIP/60-00000115”, “0?limit”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:14] ExecIf(“SIP/60-00000115”, “1?Set(GROUP(concurrency_limit)=60)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:15] ExecIf(“SIP/60-00000115”, “1?Set(CHANNEL(language)=it)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:16] NoOp(“SIP/60-00000115”, “Macro Depth is 1”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:17] GotoIf(“SIP/60-00000115”, “1?report2:macroerror”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx_builtins.c: Goto (macro-user-callerid,s,18)
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:18] GotoIf(“SIP/60-00000115”, “1?continue”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx_builtins.c: Goto (macro-user-callerid,s,37)
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:37] Set(“SIP/60-00000115”, “CALLERID(number)=60”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:38] Set(“SIP/60-00000115”, “CALLERID(name)=60”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:39] GotoIf(“SIP/60-00000115”, “0?cnum”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:40] Set(“SIP/60-00000115”, “CDR(cnam)=60”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:41] Set(“SIP/60-00000115”, “CDR(cnum)=60”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-user-callerid:42] Set(“SIP/60-00000115”, “CHANNEL(language)=it”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [01431975875@from-internal:2] Gosub(“SIP/60-00000115”, “sub-record-check,s,1(out,01431975875,never)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:1] GotoIf(“SIP/60-00000115”, “0?initialized”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:2] Set(“SIP/60-00000115”, “__REC_STATUS=INITIALIZED”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:3] Set(“SIP/60-00000115”, “NOW=1578664315”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:4] Set(“SIP/60-00000115”, “__DAY=10”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:5] Set(“SIP/60-00000115”, “__MONTH=01”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:6] Set(“SIP/60-00000115”, “__YEAR=2020”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:7] Set(“SIP/60-00000115”, “__TIMESTR=20200110-145155”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:8] Set(“SIP/60-00000115”, “__FROMEXTEN=60”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:9] Set(“SIP/60-00000115”, “__MON_FMT=wav”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:10] NoOp(“SIP/60-00000115”, “Recordings initialized”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:11] ExecIf(“SIP/60-00000115”, “0?Set(ARG3=dontcare)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:12] Set(“SIP/60-00000115”, “REC_POLICY_MODE_SAVE=”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:13] ExecIf(“SIP/60-00000115”, “0?Set(REC_STATUS=NO)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:14] GotoIf(“SIP/60-00000115”, “3?checkaction”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx_builtins.c: Goto (sub-record-check,s,17)
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@sub-record-check:17] GotoIf(“SIP/60-00000115”, “1?sub-record-check,out,1”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx_builtins.c: Goto (sub-record-check,out,1)
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [out@sub-record-check:1] NoOp(“SIP/60-00000115”, “Outbound Recording Check from 60 to 01431975875”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [out@sub-record-check:2] Set(“SIP/60-00000115”, “RECMODE=dontcare”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [out@sub-record-check:3] ExecIf(“SIP/60-00000115”, “1?Goto(routewins)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx_builtins.c: Goto (sub-record-check,out,7)
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [out@sub-record-check:7] Gosub(“SIP/60-00000115”, “recordcheck,1(never,out,01431975875)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“SIP/60-00000115”, “Starting recording check against never”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“SIP/60-00000115”, “never”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx_builtins.c: Goto (sub-record-check,recordcheck,14)
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [recordcheck@sub-record-check:14] Set(“SIP/60-00000115”, “__REC_POLICY_MODE=NEVER”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [recordcheck@sub-record-check:15] Goto(“SIP/60-00000115”, “stoprec”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx_builtins.c: Goto (sub-record-check,recordcheck,25)
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [recordcheck@sub-record-check:25] NoOp(“SIP/60-00000115”, “Stopping recording: out, 01431975875”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [recordcheck@sub-record-check:26] Set(“SIP/60-00000115”, “__REC_STATUS=STOPPED”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [recordcheck@sub-record-check:27] System(“SIP/60-00000115”, "/var/lib/asterisk/bin/stoprecording.php “SIP/60-00000115"”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [recordcheck@sub-record-check:28] Return(“SIP/60-00000115”, “”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [out@sub-record-check:8] Return(“SIP/60-00000115”, “”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [01431975875@from-internal:3] ExecIf(“SIP/60-00000115”, “0 ?Set(CDR(accountcode)=)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [01431975875@from-internal:4] Set(“SIP/60-00000115”, “MOHCLASS=attesagenerale”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [01431975875@from-internal:5] Set(“SIP/60-00000115”, “_NODEST=”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [01431975875@from-internal:6] Macro(“SIP/60-00000115”, “dialout-trunk,1,01431975875,off”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:1] Set(“SIP/60-00000115”, “DIAL_TRUNK=1”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:2] ExecIf(“SIP/60-00000115”, “0?Set(DIAL_OPTIONS=tr)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:3] GosubIf(“SIP/60-00000115”, “0?sub-pincheck,s,1()”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:4] GotoIf(“SIP/60-00000115”, “0?disabletrunk,1”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:5] Set(“SIP/60-00000115”, “DIAL_NUMBER=01431975875”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:6] Set(“SIP/60-00000115”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:7] Set(“SIP/60-00000115”, “OUTBOUND_GROUP=OUT_1”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:8] Set(“SIP/60-00000115”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/60-00000115”, “0?nomax”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:10] GotoIf(“SIP/60-00000115”, “0?chanfull”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:11] GotoIf(“SIP/60-00000115”, “0?skipoutcid”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:12] Macro(“SIP/60-00000115”, “outbound-callerid,1”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/60-00000115”, “0?Set(CALLERPRES(name-pres)=)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/60-00000115”, “0?Set(CALLERPRES(num-pres)=)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:3] ExecIf(“SIP/60-00000115”, “0?Set(REALCALLERIDNUM=60)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:4] ExecIf(“SIP/60-00000115”, “0?Set(AMPUSER=60)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:5] GotoIf(“SIP/60-00000115”, “1?normcid”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx_builtins.c: Goto (macro-outbound-callerid,s,9)
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:9] Set(“SIP/60-00000115”, “USEROUTCID=”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:10] Set(“SIP/60-00000115”, “EMERGENCYCID=”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:11] Set(“SIP/60-00000115”, “TRUNKOUTCID=0106121826”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:12] GotoIf(“SIP/60-00000115”, “1?trunkcid”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx_builtins.c: Goto (macro-outbound-callerid,s,18)
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:18] ExecIf(“SIP/60-00000115”, “1?Set(CALLERID(all)=0106121826)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:19] ExecIf(“SIP/60-00000115”, “0?Set(CALLERID(all)=)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:20] ExecIf(“SIP/60-00000115”, “0?Set(CALLERID(all)=)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:21] ExecIf(“SIP/60-00000115”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:22] ExecIf(“SIP/60-00000115”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:23] Set(“SIP/60-00000115”, “CDR(outbound_cnum)=0106121826”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-outbound-callerid:24] Set(“SIP/60-00000115”, “CDR(outbound_cnam)=”) in new stack
[2020-01-10 14:51:55] WARNING[1847] func_cdr.c: CDR requires a value (CDR(variable)=value)
)[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:13] GosubIf(“SIP/60-00000115”, “0?sub-flp-1,s,1()”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:14] Set(“SIP/60-00000115”, “OUTNUM=01431975875”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:15] Set(“SIP/60-00000115”, “custom=SIP/0108933606_out”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/60-00000115”, “1?Set(DIAL_TRUNK_OPTIONS=M(setmusic^attesagenerale)Tt)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:17] ExecIf(“SIP/60-00000115”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^attesagenerale)TtM(confirm))”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:18] Macro(“SIP/60-00000115”, “dialout-trunk-predial-hook,”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/60-00000115”, “”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:19] GotoIf(“SIP/60-00000115”, “0?bypass,1”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/60-00000115”, “1?Set(CONNECTEDLINE(num,i)=01431975875)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:21] ExecIf(“SIP/60-00000115”, “1?Set(CONNECTEDLINE(name,i)=CID:0106121826)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:22] ExecIf(“SIP/60-00000115”, “0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)0106121826)”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:23] GotoIf(“SIP/60-00000115”, “0?customtrunk”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-dialout-trunk:24] Dial(“SIP/60-00000115”, “SIP/0108933606_out/01431975875,300,M(setmusic^attesagenerale)Tt”) in new stack
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] netsock2.c: Using SIP RTP TOS bits 184
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] netsock2.c: Using SIP RTP CoS mark 5
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] app_dial.c: Called SIP/0108933606_out/01431975875
[2020-01-10 14:51:55] VERBOSE[56296][C-00000076] app_dial.c: SIP/0108933606_out-00000116 is ringing
[2020-01-10 14:51:57] VERBOSE[56296][C-00000076] app_macro.c: Spawn extension (macro-dialout-trunk, s, 24) exited non-zero on ‘SIP/60-00000115’ in macro ‘dialout-trunk’
[2020-01-10 14:51:57] VERBOSE[56296][C-00000076] pbx.c: Spawn extension (from-internal, 01431975875, 6) exited non-zero on ‘SIP/60-00000115’
[2020-01-10 14:51:57] VERBOSE[56296][C-00000076] pbx.c: Executing [h@from-internal:1] Macro(“SIP/60-00000115”, “hangupcall”) in new stack
[2020-01-10 14:51:57] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-hangupcall:1] GotoIf(“SIP/60-00000115”, “1?theend”) in new stack
[2020-01-10 14:51:57] VERBOSE[56296][C-00000076] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2020-01-10 14:51:57] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-hangupcall:3] ExecIf(“SIP/60-00000115”, “0?Set(CDR(recordingfile)=)”) in new stack
[2020-01-10 14:51:57] VERBOSE[56296][C-00000076] pbx.c: Executing [s@macro-hangupcall:4] Hangup(“SIP/60-00000115”, “”) in new stack
[2020-01-10 14:51:57] VERBOSE[56296][C-00000076] app_macro.c: Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/60-00000115’ in macro ‘hangupcall’
[2020-01-10 14:51:57] VERBOSE[56296][C-00000076] pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/60-00000115’

No sure what’s going on, but some providers don’t appreciate calls being answered immediately or they require SIP ringing/progress to be sent back before the answer. There are some options in the Inbound Route such as pause before answer and signal ringing that you can experiment with. Otherwise you will probably have to touch with the provider to find out what is going on.

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.

Exceptionally long voice queue length queuing

I changed my admin password today and for some reason I am unabel to log back into my FreePBX.
I have access via CLI
There are so many articles saying different things as to how to change this password via CLI
Can anyone give me clear instructions on how to do this via CLI?

12.7.6-1904-1.sng7

I have the same problem.

I solved how easy it was to imagine a communication problem with AMI

in fact I used:

Variable: _SIPADDHEADER55 = Call-Info: sip: “. $ User.” @ “. $ SERVER_ADDR.” ; Answer-after = 0

with this line of code and that number gave me problems removed this line now works but I don’t understand why …

can anyone explain it to me …?

Really? There is only one way to do this, fwconsole unlock xxx
https://wiki.freepbx.org/pages/viewpage.action?pageId=37912685#fwconsolecommands(13+)-Unlock

Hi Josef,

I think what you are trying to do is set your IVR as destination for incoming calls, Right?

What you have to do is:
Go to Connectivity > inbound routes > Then select or add an inboundroute.The last setting on the general page is set destination, select ‘IVR’ in the first colum and in the second colum select your IVR

Snippet.png904×562 27.6 KB

OMG thank you so very much. I was googeling Change freepbx password from CLI and never found your article. Thank you for taking the time to help a noob. Very much appreciated.

Hi everyone,

We are going to switch form Siptrunk provider. our new provider needs ‘p-preferred-identity’ for signalling.
We handle our CID’s throught our outbound routes, is there an easy way to add the ‘p-preferred-identity’ to our PBX?

The problem is that when I use the trunk without the right signalling protocol, the receiver of the call sees our account number and not the set CID from the PBX.

Thanks in advance!

yes, is that, but how to define my programming ivr? this “my IVR” will no go to a loop?

i have no create any IVR because on set destination i dont know where must to go

yes, is that, but how to define my programming ivr? this “my IVR” will no go to a loop?

Not in my case, when I add this the call goes to the IVR, then the IVR handle the call.
To be shure you have to test this.

Seeing the same issue with a new FreePBX14 install and running fwconsole ma upgradeall

Unable to Parse XML response from Mirror. See the log for more details

you create “my ivr?” or where u got this?

If you need help with making an IVR or any other inboundroute i advise you to watch the video’s of Chris Sherwood on Youtube (crosstalk solutions) he made easy video’s for installing FreePBX.

See his playlist on Youtube

Watch video 12 and 13.

It helped me a lot in the beginning!