Sip Trunk Provider
Ok.I got it.Sipstation was my first look up but it does not fits my needs.I need a server in europe and unlimited channels for outgoing anyway...Thank you
View ArticleRestricting who can initiate a page
I am pretty sure class of service is what you want. That said it won't work in 2.10 you would have to come to a more recent version of FreePBX
View ArticleUnable to receive calls - outbound okay
Hi, Good to hear that you progressed. Check your password in the extension settings and in your phone again. Can you send here your trunk settings screenshot? Thank you, Daniel FriedmanTrixton LTD.
View ArticleClik here to view.
Restricting who can initiate a page
Hi, I suggest to allow the paging codes by CLI. Let us say that your paging code is *80 and your extension is 222. Let us assume that your extensions are 3XX. You can write a custom dial plan like...
View ArticleShut Down Free PBX
I am sorry, do not understand your question,Anyway i explain : After the DAHDI CONFIG module has been disable in Module Admin, i reboot the system from CLI then i noticed that on reload cards loose...
View ArticleThe ongoing Firewall Saga! (2nd Post has status)
Ah, ok, thanks Andrew. I'll wait to see if Rob pushes out a fix for the issue I'm having with timer_list and see if the firewall starts normally after that. Thanks - Matt
View ArticleUnable to receive calls - outbound okay
Hi, Don't you have another trunk with the same name?Send me the screenshot of the whole trunk settings page. Thank you, Daniel FriedmanTrixton LTD.
View ArticleClik here to view.
Unable to receive calls - outbound okay
Yes I have 2 trunks. I'll take a couple of snapshots of each so you can see the whole page. 1st trunk below...
View ArticleClik here to view.
A security problem: false calls from within the system
CDR Break in.gif1012x509 16.2 KB I use FreePBX 12.0.76.2 asterisk 11 FreePBX DistroLately I face outgoing calls that fail but they clog the system sometimes. I Joggle between IP Addresses than it...
View ArticleUnable to receive calls - outbound okay
Hi, please add canreinvite=no to the trunks settings and send me the Asterisk console logs after an inbound call (core set verbose 4). Please send me also the sip settings (sip show settings). Thank...
View ArticleClik here to view.
Unable to receive calls - outbound okay
danielf: core set verbose 4 okay - I added canreinvite=no to both trunks here are the sip settings sip show settings Global Settings: UDP Bindaddress: 0.0.0.0:5060 TCP SIP Bindaddress: Disabled TLS...
View ArticleUnable to receive calls - outbound okay
Hi, Please correct your NAT settings. Change your ip to a public one (not static). Please remove the context=from-pstn from the trunks. Thank you, Daniel FriedmanTrixton LTD.
View ArticleClik here to view.
Unable to receive calls - outbound okay
Are you sure about mkoenig: Localnet: 88.214.255.64/255.255.255.224 ?
View ArticleHow to Export FreePBX CDR into CSV
Go to the CDR reports, and select CSV file for the report type, on the right hand side.
View ArticleHow to Export FreePBX CDR into CSV
Many installations already have them in /var/log/asterisk/cdr-csv/Master.csv* (installing asterisk will do that by default) If the are not there then perhaps add [csv]usegmtime=yes ; log date/time in...
View ArticleCall full external Number from Intern
Hi, it works for me because I only have to check if the Number starts with something like this:+4978455488 <== All numbers which are starting with +4978455488 are numbers of the location of my...
View ArticleUnable to receive calls - outbound okay
That's from the freepbx gui after detecting external address. ifconfig does not show this.
View Article