High CPU! FreePBX17 Debian Install
fwconsole pm2 --log sangomartapi This may show you what is going on with the process.
View ArticleAMI Originate PreDialGoSub and macro-dialout-trunk-predial-hook Not Executing...
If you’re expecting to use the FreePBX internals on your calls, then you need to use local channels for both legs of the originate. Not only will this ensure that the dialplan hooks get called, the...
View ArticleClik here to view.
Number Manipulation Rules not working for Automatic Outbound calls
Hello, I have configured digit manipulation rules for my second SBC to use a prefix for all outgoing calls: I’m doing automatic calls, by placing a file to /var/spool/asterisk/outgoing. This file has...
View ArticleClik here to view.
No CDR Reports
What’s the Advanced Setting parameter “Enable CDR Logging” set to? There was a bug many months back that disabled that setting on some systems.
View ArticleNo external access to extensions
dear, I have a little problem I can’t access the PBX from outside the network, nor are the extensions online, can you help me?
View ArticleClik here to view.
Number Manipulation Rules not working for Automatic Outbound calls
Tried using the number without plus, same thing, rule was not taken into consideration.
View ArticleClik here to view.
ATTENDEDTRANSFER not reported to /var/log/asterisk/queue_log
yes i describe it here unfortunately it is default behaviour for FREEPBX ATTENDEDTRANSFER not reported to /var/log/asterisk/queue_log Applications / Modules i noticed that it is a Freep PBX issue...
View ArticleATTENDEDTRANSFER not reported to /var/log/asterisk/queue_log
I don’t see where you tested transferring a call via *2 for an Attended Transfer or ## for a Blind Transfer. That post just tells us how you are logging into the queues.
View ArticleCreating extensions, ivrs, trunks and queues programmatically
I suspect from the way the question is being asked the OP is trying to build a front end portal for reselling phone service in a multi tenant environment and he is looking for an API to control the...
View ArticleAdd a custom AI Based IVR?
Would inbound calls first hit callmydoc or said FreePBX system? If it’s callmydoc and the call gets routed to FreePBX based on what the patient selects I am not sure that FreePBX needs to do much in...
View ArticleNumber Manipulation Rules not working for Automatic Outbound calls
I assume that what you have configured is FreePBX, not the SBC. In that case, SIP/SBC2/+123456789 is directly addressing the endpoint, albeit using an obsolete, and no longer supported, channel...
View ArticleCorrect update FreePBX 13.0.194.10 to FreePBX 16
Take a full backup of your current FreePBX installation. Install a new instance of FreePBX and restore from your full backup. After the installation is complete you should be able to register your new...
View ArticleHigh CPU! FreePBX17 Debian Install
You didn’t specify how much processing power your installation has. Maybe the problem is that the installation doesn’t have enough processing power in the first place, which would be the case if this...
View ArticleWarmspare backup is does not have some configuration copied as Primary servera
Freepbx 15, Backup and restore and IVR modules are same versions.Backup has IVR modules to backup. But warmspare does not show IVRs and on queue, I am missing IVR breakouts on caller announcement...
View ArticleATTENDEDTRANSFER not reported to /var/log/asterisk/queue_log
Hello i noticed on Freepbx 15 and 16 asterisk 18 and 20 even when. I’m using *2 or ## both ATTENDEDTRANSFER and. BLINDTRANSFER events are not reported to queue_log WHY ? Please advice
View ArticleAdd a custom AI Based IVR?
Would inbound calls first hit callmydoc or said FreePBX system? we can do whatever we need to do, this is a new design for us, patient AI spoken IVR. If it’s callmydoc and the call gets routed to...
View ArticleAdd a custom AI Based IVR?
Yea, I guess whomever you end up hiring to do this will need to understand how callmydoc fits into the whole picture. In my head I am comparing callmydac to something like Car Wars in the automotive...
View ArticleDebian 12 and new deployment script
Where do we define endpoints? Guessing it is in mysql database, what table? We define these vars in a private function that is throwing the exception. Slightly modified the function in hope of...
View Article