Block an extenension making external calls
Hi Kyle I found the free routing module and I asked for it for a year at 0 cost Not sure what happens now as under the extensions and outbound route it still shows not registered and out bound nothing...
View ArticleTelemarketer/spammer data source in csv format for blacklist?
Is this even a thing? I know TrueCaller on android has a blacklist but it seems proprietary. Anyone doing bulk imports of bad numbers?
View ArticleTelemarketer/spammer data source in csv format for blacklist?
often folks use superfecta which has tieins for several services such as whocalled.us and 800notes
View ArticleBlock an extenension making external calls
Thank you seems to be working not to sure what happened appreciated
View ArticleFew issues after upgrade from 6.12 to 10.13
OSS End Point Manager is not support by FreePBX and appears to be broken for FreePBX 13
View ArticleEPM - Grandstream
Grandstreams don't really like the tftp:// to be specified, and default to HTTP distribution. What I've found is open both, http and TFTP distribution to the phones, then specify in the template to...
View ArticleCan't register SIP device after new Free PBX install. FreePBX 13
I have deleted the user and re-created the user under User Management module and used a different secret. Still the same result. I am not clear on where the user name comes from. When the debug output...
View ArticleDial extension goes directly to voicemail
Hi Mike, I am glad to hear that everything is working for you now. Daniel FriedmanTrixton LTD.
View ArticleClik here to view.
Firewall - error on initial setup adding LAN IP to trusted zone
Hi,Just did a new test spin of FPBX13-Stable. All went smoothly. After reboot, the console said that all modules were being updated. Success. Upon login, I was greeted by the barbed wire frog and...
View ArticleClik here to view.
Firewall - error on initial setup adding LAN IP to trusted zone
Few more screenshots...
View ArticleFirewall - error on initial setup adding LAN IP to trusted zone
Pinging @xrobau on this for you.
View ArticleProblems Upgrading UCP Node
After using the steps above to fix my FPBX13 appliance a few weeks ago, things somehow broke again. UCP Node is being disabled pending upgrade to the 13.0.12. That upgrade fails. I redid the steps...
View ArticleCallcentric outgoing caller ID no longer working
My FreePBX server is no longer sending the correct outgoing caller ID. The installation worked flawlessly until a recent update. Edited the /etc/sip_general_custom.conf file with sendrpid =...
View ArticleCallcentric outgoing caller ID no longer working
Hi, Can you send the log with verosity (core set verbose 4) ? Thank you, Daniel FriedmanTrixton LTD.
View ArticleCallcentric outgoing caller ID no longer working
-- Executing [8155083124@from-internal:1] Dial("SIP/101-0000000a", "SIP/906") in new stack [2015-11-17 11:08:49] WARNING[20318][C-00000019]: chan_sip.c:6016 create_addr: Purely numeric hostname (906),...
View ArticleCallcentric outgoing caller ID no longer working
Hi, I do not know what is this SIP/906, but you did not attached the whole log. Please paste the whole log from dialling until the trunk dialling. Thank you, Daniel FriedmanTrixton LTD.
View ArticleCallcentric outgoing caller ID no longer working
Number 8155083124 dialed from extension 101outgoing route for that extension has caller ID forced to 18183015045 (registered with callcentric)call completes but default caller ID 5132570597 shows up...
View ArticleClik here to view.
Changing voicemail email template in FreePBX 13
I recently upgraded to FreePBX 13 and I've discovered that the voicemail template has changed. The new voicemail message looks like this: Dear Joe Smith: Just wanted to let you know you were just left...
View ArticleCallcentric outgoing caller ID no longer working
Hi, You are ommiting a 1 from your callerid:(Executing [s@macro-dialout-trunk:22] Dial("SIP/101-0000000c", "SIP/5132570597/18155083124,300,Tt") Your callerid was set to 15132570597:Executing...
View ArticleVoicemail app question
That is still the behaviour I'm seeing. Mitel 6867i sets. Should this be considered a bug? or is there a setting on the phone or the app to bypass this?
View Article