SIP Trunk Registration Issue with BTCL (No Response from 10.200.10.4)
then you would need to make sure you have a specific route ip route --help beween those two networks for traffic to flow
View ArticleClik here to view.
SIP Trunk Registration Issue with BTCL (No Response from 10.200.10.4)
This is how my network is working.
View ArticleSIP Trunk Registration Issue with BTCL (No Response from 10.200.10.4)
I tried ICMP. It’s fine, i have checked all the network issues. The problem is the username with the domain name. I think for the username trunk is not being registered.
View ArticleSIP Trunk Registration Issue with BTCL (No Response from 10.200.10.4)
So you can ping 10.200.10.4 from the PBX? Or were you pinging from the router?
View ArticleSIP Trunk Registration Issue with BTCL (No Response from 10.200.10.4)
From the PBX and also from my lan side I can ping the server ip.
View ArticleSIP Trunk Registration Issue with BTCL (No Response from 10.200.10.4)
I checked the network side, I can reach the SIP server from the PBX and also from my LAN side.
View ArticleSIP Trunk Registration Issue with BTCL (No Response from 10.200.10.4)
Sir, I have already made a bridge on the Mikrotik router.
View ArticleSIP Trunk Registration Issue with BTCL (No Response from 10.200.10.4)
Then sngrep would exposes all the traffic getting to your PBX both SIP and SDP, compare the traffic with what the mikrotik sees https://help.mikrotik.com/docs/spaces/ROS/pages/8323088/Packet+Sniffer
View ArticleSangoma Talk Inbound/Outbound Sound and Voicemail Not Working. Desk Phones...
Hi, not an expert, we had the similar issue, sounds like you still have FW/natting/forwarding issues. make sure you also have the correct UDP ranges open and forwarded....
View ArticleSangoma Talk Inbound/Outbound Sound and Voicemail Not Working. Desk Phones...
You are correct, it was a NAT modification and now that is working fine.
View ArticleSIP Trunk Registration Issue with BTCL (No Response from 10.200.10.4)
Assuming you are using the Mikrotik device as a router, Mikrotik routers by default have a SIP ALG helper enabled. Have you tried disabling it?
View ArticleFreePBX17 Two Transport RTP issue
If you are expecting to use SIP services on both networks, 0.0.0.0/0 UDP must be used. You should also set the default gateway to the one belonging to your LAN, and set a static route for your SIP...
View ArticleSIP Trunk Registration Issue with BTCL (No Response from 10.200.10.4)
You should be trying with a UDP ping.
View ArticleClik here to view.
SIP Trunk Registration Issue with BTCL (No Response from 10.200.10.4)
theashikd: he problem is the username with the domain name. That is not consistent with the “no response” symptom.
View ArticleClik here to view.
Sangoma Phone My Queues Tab
We’ve been using Sangoma Phone for some time now, but recently we’ve been having a few users who’s queues do not show up under the ‘My Queues’ tab in the softphone: We’ve removed and re-added to the...
View Article10-15 second pause before the IVR announcement plays
We just recently updated our Sound Recordings for our main IVR and now the first announcement only starts playing after 10-15 seconds. Looking at the Asterisk Logs we can see the SIP connection is...
View Article10-15 second pause before the IVR announcement plays
There isn’t enough information to be clear what the situation is here, but I wonder if you are the describing the effect you get when a router needs outgoing traffic, to build rules for incoming...
View ArticleDAHDI struggles and getting an analog Sangoma A200 to work
Does this disable the Dahdi Config menu option in the FreePBX GUI? I don’t see this LINK. It’s OK if I’m not supposed to use it, I am just not sure what to do next. I have one analog line in port 1 of...
View ArticleDisable Session progress on incoming calls - no ringing tone
Hi David, please find the logs: Call Logs - FreePBX Pastebin Call triggers Ring Group 400. Regards.
View ArticleClik here to view.
ClearlyAnywhere Voicemail *97 Rewriting
If you have multiple people handling estimate calls at their desks, or if you’re configuring this for a single user, a better approach may be using a hardware phone that supports two separate SIP...
View Article