Disable Text messages
Hi Pitzkey apologies yes i’m looking to disable the option of receiving sms messages coming through as calls,
View ArticleTrying to install FreePBX via VGA but not seeing the graphical output
The system still fires up after about 5 minutes. But its a bit sluggish. This is a quad core 2.3ghz, 4GB Ram, and 256gb SSD.
View ArticleClik here to view.
PJSIP extension won't register when created via extension module
tom_88: No matching endpoint found This error is commonly indicative of a SIP port mismatch. Can you connect to the /var/log/asterisk/full log file and show us the actual error in the log? The ‘dash’...
View ArticlePick up handset goes to handsfree
Sorry should have included some info: PBXact 13.0.195 Sangoma S500
View ArticleClik here to view.
FreePBX /admin/config.php not allowing login
reckart: It just goes in a loop to /admin/config.php#, There is a ‘debugging’ option in most browsers (F12, I think) that might help shed some light on this. We hear reports like this from time to...
View ArticleClik here to view.
S700 base stand don't fit with EXP100
Bought an EXP100 to test with my S700, and the S700’s base stand could not be replaced without a bit of attention from a Dremel tool to trim one of the corners so it wouldn’t be blocked by the...
View ArticleClik here to view.
Disable Text messages
Matthew99: i’m looking to disable the option of receiving sms messages coming through as calls That didn’t really help. An SMS call doesn’t present to the system as a ‘phone call’, so it isn’t going...
View ArticleFreePBX /admin/config.php not allowing login
Well I have tried various browsers, systems, platforms. Nothing works. It doesn’t actually Loop, it just only shows that url when you click on the admin button.
View ArticlePolycom Color Expansion Module not populating
Sounds like (to me) it might be “EPM Ticket Time” in the Issues tab. If everything looks like it should be working and it isn’t, there might be a problem with EPM that we (as mere users) can’t readily...
View ArticleTrying to install FreePBX via VGA but not seeing the graphical output
It could be a video card problem (I suppose). If that’s the case, changing out the video may solve your issues in the short term. A five-minute start-up time is something we see with systems with...
View ArticlePolycom Color Expansion Module not populating
I have had a similar issues in the past with, if you have another expansion module try it(before opening a ticket). Also try and use another 6P connector wire, I have bought a few were “broke”...
View ArticleClik here to view.
Pick up handset goes to handsfree
enderst: PBXact 13.0.195 Sangoma S500 Since both of these are ‘Sangoma’ commercial pieces and may be covered under warranty, you might add a second prong to your attach and fire up a support (or maybe...
View ArticleClik here to view.
Polycom Color Expansion Module not populating
lzcantrell: I have had a similar issues in the past with, if you have another expansion module try it(before opening a ticket). Also try and use another 6P connector wire, I have bought a few were...
View ArticleClik here to view.
FreePBX /admin/config.php not allowing login
Try a “display page source” in your browser. reckart: it just only shows that url when you click on the admin button. Restating that it’s broke doesn’t help. You’re not giving us anything to work...
View ArticleTrying to install FreePBX via VGA but not seeing the graphical output
This Mini NUC PC will only have 13 Extensions with an 8 channel SIP trunk. Quad Core 2.3ghz, 4GB Ram, and 256gb SSD
View ArticleTrying to install FreePBX via VGA but not seeing the graphical output
That’s a bit extreme. My cloud pbx with 50 extensions barely uses 2 gigs. [root@sip ~]# free -h total used free shared buff/cache available Mem: 3.7G 1.3G 779M 233M 1.6G 1.8G Swap: 2.0G 80M 1.9G
View ArticleHow to delete unused users in user manager
nothing is there to delete the user AND what is worse if I try to edit it I can’t change anything I will try to paste a picture
View ArticleClik here to view.
Trying to install FreePBX via VGA but not seeing the graphical output
computertechs: That’s a bit extreme. My cloud pbx with 50 extensions barely uses 2 gigs. So you’re saying your cloud provider is using a Mini-NUC? That doesn’t really sound like a plausible model… In...
View ArticleHow to delete unused users in user manager
Are you using AD. If so your AD had to delete them.
View Article