Provision and update Grandstream GXP2130
You don't have to lay hands on, but you can go to Admin - Phone Restart - and choose the particular extension you want to reboot.
View ArticleConfiguring Grandstream HT503 As Trunk
I've got two HT503s for which I'm trying to configure the FXO ports as trunks. I've setup two trunks in FreePBX and configured two usernames and passwords. But for one of the HT503s I see in the...
View ArticleConfiguring Grandstream HT503 As Trunk
Did you set and reset the port (5062) the device is expecting to use in your "trunk"?
View ArticleClik here to view.
Conference Bridge Muting Participants
Hello,I'm getting lots of complaints from users that the conference bridge is muting callers without warning, it happens 4 or 5 times in an hour long conference. From what I can tell, it's only cell...
View ArticlePjsip transport error
[2016-03-08 10:19:47] WARNING[1531]: pjsip:0 <?>: tsx0x7fb340013 .Error sending Request msg OPTIONS/cseq=599 (tdta0x37f3af0): Network is unreachable[2016-03-08 10:19:47] WARNING[1531]: pjsip:0...
View ArticleConfiguring Grandstream HT503 As Trunk
No, I never changed it. In either HT503. I left it at the default 5062. As you can see from the message the HT503 is connecting. Just some sort of weird password error that I don't understand.
View ArticleConfiguring Grandstream HT503 As Trunk
Surely the SIP default is 5060 (or 5061 if you are hampered with pjsip) those devices usually use a different port for each FXO/FXS you will need to configure your Asterisk endpoint to suit.
View ArticleHigh Availability error, Asterisk doesn't properly start
@xrobau Having an issue with High Availability. HA and sysadmin on latest versions.When I change nodes, asterisk doesn't properly start.No phones register and I see a "No such command 'sip show peers"...
View ArticleConfiguring Grandstream HT503 As Trunk
I changed the SIP port in the Grandstream from it's default 5062 to 5060 and now it's using a random high port instead of 5060: [2016-03-07 19:45:59] NOTICE[1584]: chan_sip.c:28353...
View ArticleConfiguring Grandstream HT503 As Trunk
That is normal, now find the correct authority for the account you are trying to register.
View ArticleCHAN_PJSIP disabled
Well, two months late here but I just discovered this. I'm trying to follow some instructions that tell me to use the chan_pjsip driver. If I try to set the SIP Channel Driver setting to "Both" it...
View ArticleConfiguring Grandstream HT503 As Trunk
Two things. One, I found the "port=5062" setting in the FreePBX trunk screen. So I'm trying that. And by authority do you mean user and password? Yea, I've checked and double checked. Now the wiki...
View ArticlePOE SIP phone w/o lcd
Hi allI'm looking for a SIP phone that doesn't have a screen, something like Cisco spa301, but I need it to be POEAny suggestions?Thanks
View ArticleProvision and update Grandstream GXP2130
I've been playing with a couple of GXP2160s and can't get them to reboot from the EPM. My old Yealinks do. There are some things I really like about the Grandstreams, but there are some serious...
View ArticleProvision and update Grandstream GXP2130
I know. Its really hit and miss with their firmware in the last year. I have 75 of the 2160's that Im gonna phase out for the new Sangoma phones.
View ArticlePOE SIP phone w/o lcd
Can you explain "no display" That would probably be the hardest thing to find. May have to go with something like: http://www.amazon.com/Planet-VIP-156PE-802-3af-Telephony-Adapter/dp/B00YV42ED2 with...
View ArticleSNOM PA-1 and the CEPM
Out of the box I was really excited to see the Snom PA1 as a certified device for the Commercial End Point Manager. I created a regular sip extension, stuck the PA1's MAC into the MAC field in the End...
View ArticleClik here to view.
POE SIP phone w/o lcd
jfinstrom: Can you explain "no display" Cisco SPA 301This is NOT POE, I'm looking for something like this, WITH POE...
View Article