Clik here to view.
Shut Down Free PBX
dicko: http://issues.freepbx.org/browse/FREEPBX-9421 Very good catch @dicko Sounds like the issue the OP has and definitely confirms what I thought was happening... @telili Do you have the card that...
View ArticleShut Down Free PBX
The older cards have a physical jumper for T1/E1/J1, the newer ones need that option defined. As the link ultimately recommends, you might best disable the dahdi "helper" module and just "help...
View Articleen_GB Sound Language Pack Not Working
Hi! You seem to be using G722, can you try turning it off and try again? Someone recently had problem with G722 as well, I wonder if your problem could be related... See:...
View ArticleError report asterisk -r
There areI talked to the supplierAnd 'normal and reverse DNS does not resolve .... because by default!I did not knowNow I must indicate the name hosts and they attribute that to begin and resolve...
View Articleen_GB Sound Language Pack Not Working
Yes turning off G722 in the handset did the trick. To summaries: - I installed the FreePBX-64bit-10.13.66.iso distribution.We have Yealink T23G handsets. By default G722 is enabled. Using the default...
View ArticleFPBX13 RC, G722 and 1-way audio - even to voicemail
Ive had a similar issue.See http://community.freepbx.org/t/en-gb-sound-language-pack-not-working/31575 To summaries: - I installed the FreePBX-64bit-10.13.66.iso distribution.We have Yealink T23G...
View ArticleHow to create an agent directly in FreePBX?
Hi, When I have registered my queue config in Asterisk server, I didn't see my extensions registered as dynamic members in "agents.conf", is it normal?
View ArticleClik here to view.
If you could help with the H/W specs
Continuing the discussion from Very simply (i hope) - hardware reqs. for an SMB install: Very simply (i hope) - hardware reqs. for an SMB install 40 phones is a small system. Asterisk is used by...
View ArticleHardware Requirements for a 800 user system
Hi All, I have worked only on FreePBX in labs and never set up a system for usage by end users. A friends apartment has some 800 users with the old analog PBX system which is not working anymore and...
View ArticleFreePBX slowed down significantly
Hello, I use FreePBX 6.12.65, I tried to connect a new device, so I created an extension for this device, but when I configured it I was wrong to enter the secret. Fail2ban banned the ip it was...
View ArticleHow to create an agent directly in FreePBX?
Oh really? There isn't a module in FreePBX to create agents like extensions?Because I need this file config for an other Asterisk GUI called "Visual Dialplan".
View ArticleClik here to view.
Error report asterisk -r
Hi! claloano: I talked to the supplierAnd 'normal and reverse DNS does not resolve .... because by default!I Reverse DNS does but they did not bother to create the corresponding forward (ie "normal")...
View ArticleClik here to view.
en_GB Sound Language Pack Not Working
czworks: Yes turning off G722 in the handset did the trick. Good to know... Thank you for reporting back! Good luck and have a nice day! Nick
View ArticleISDN not playing back Busy tones when extension busy
Hi All I've just been made aware of a strange issue regarding people dialling in from the outside to a number that is busy. When they do all they hear is ringing for 20seconds then they get...
View ArticleAMI Action: CoreShowChannels
Hi, I have update the piece of code to add the duration of the channel. Thank you, Daniel FriedmanTrixton LTD. Mobile: +41.79.868.7050Mobile: +972.50.6655579 Email: dani@3xton.com
View ArticleFPBX13 RC, G722 and 1-way audio - even to voicemail
There is no fix. You need to bring this up with asterksk/digium. It's not a freepbx issue.
View ArticleFPBX13 RC, G722 and 1-way audio - even to voicemail
I know Andrew and Rob both were able to get this to work. But I am curious, in your testing, did you: Go to Settings ---> Asterisk SIP Settings and enable the g722 codec and make it the top...
View ArticleShut Down Free PBX
Hi you both, @dicko thank you for the link, but it's slightly different to my case, yes i use this options wcte13xp to set the digital card on E1 mode on CLI and after i make a reboot the card show me...
View ArticleClik here to view.
FPBX13 RC, G722 and 1-way audio - even to voicemail
Bullfrog: Thus, it seems possible that this is a FreePBX issue, not an Asterisk issue. Asterisk is obviously able to transcode properly, because method 2 above works fine. If you can prove that it's a...
View Article