"Can Not Connect to Asterisk" After upgrade
Is 13 considered stable or should I migrate back to 12? I thought I read somewhere that in this version of Freepbx that only 11 and 13 were supported.
View ArticleIAX2 Trunk(s) between two (or more) FreePBX Servers
Hi, No Need to verify the public IP for that. Just make sure the servers will register to each other.in the trunk settings you can set host=dynamic and configure a user name and password for the...
View ArticleIAX2 Trunk(s) between two (or more) FreePBX Servers
Ah ok, I'll try it this way.But do i need to set any Incoming Settings on the trunks? Thanks.
View ArticleChange default settings for permit/deny in device options
Hi, Just change it the advanced settings module. Find the section that defines the creation of new extensions and set that fields to whatever you want. Thank you, Daniel FriedmanTrixton LTD. Mobile:...
View ArticleIAX2 Trunk(s) between two (or more) FreePBX Servers
Hi, If you will follow my example you will not need to set the user part of the trunk as the role of every trunk is type=friend. Thank you, Daniel FriedmanTrixton LTD. Mobile: +41.79.868.7050Email:...
View ArticleClik here to view.
IAX2 Trunk(s) between two (or more) FreePBX Servers
Thank you very much. This information is very helpful
View ArticleNewbie needs help - freepbx door station surveillance installation
Hi, There are two possibilities: Create a ring group in the Freepbx and add all the extensions that you want to call.a. Upon creation the ring group, set the number of the ring group (usually 600, but...
View ArticleChange default settings for permit/deny in device options
Are you sure this can be set in "Advanced Settings"?Can't find it there.
View ArticleEveryone is busy/congested at this time
Asterisk 13 with FreePBX 13.0.6 Clean install. Running a Chrome Browser client and a Polycom desk phone on the same LAN as the PBX. I have 2 extensions. 1 allocated to the Polycom and 1 in use via...
View ArticleChange default settings for permit/deny in device options
Hi, Yes. Do you want me to show you? just open a temaviwer or ammyadmin for me. Thank you, Daniel FriedmanTrixton LTD. Mobile: +41.79.868.7050Email: dani@3xton.com
View ArticleChange default settings for permit/deny in device options
Thanks.Could you post a screenshot, would that work?
View ArticleChange default settings for permit/deny in device options
Hi, I am sorry my friend, but for some reason i have confused by the allow/disallow fields in the advanced settings module. However, I have a suggestion for you that will help you fix your problem...
View ArticleNew server, backup restore produces retrieve_conf encountered an error: 1
It appears to be all good, thanks again!
View ArticleCisco CP7975G Registration EPM
Guys, sorry I was out of town when you posted this. Anyway, I am back in the office today, and I tried getting the phone to register with a combination of all of these tips, and it finally worked! I...
View ArticleChange default settings for permit/deny in device options
That is a possibility.Changing defaults is still preferable in my case. I guess I will open a feature request. Again, thanks for your suggestions.
View ArticleFollowMe to an external number
[2015-10-27 11:56:25] VERBOSE[17153][C-00005c33] pbx.c: -- Executing [s@macro-outisbusy:5] Congestion("Local/7809782660@from-internal-0000483d;2", "20") in new stack[2015-10-27 11:56:25]...
View ArticleFPBX13 RC, G722 and 1-way audio - even to voicemail
Now testing with two phones with g722, one with audio, one without. Environment: 1 Grandstream GXP2160 w/ firmware 1.0.4.23 1 Mitel 6865i w/ firmware 4.1.0.128 Asterisk 13.5.0 FreePBX 13.0.6 OS: SHMZ...
View Article"Can Not Connect to Asterisk" After upgrade
12 isn't supported by Asterisk anymore. Use 11 or 13. 12 is fine it's just not updated.
View ArticleRebuilding freepbx .img file?
Though the distro is free "as in beer" its license is not. The distro is built with stability and supportability in mind. That said we do not allow "respins" of the distro. Please see:...
View Article24 hour call, large bill. how to prevent?
Hello, We a call last week then went over 24 hours. It landed in our voicemail system. We never received a voicemail message which was 24 hours in length, but it seems the truck did hang up that long...
View Article