Recently created install won't load SQL
I was having this issue last week on a system I upgraded to FPBX 15… I believe it was a bad module or OS update somewhere. Didn’t have a chance to narrow it down much. What FPBX and Asterisk version...
View ArticleRecently created install won't load SQL
Based on the system hostname, how was this installed? On a VPS or cloud host? Are you sure the process you followed did not miss a step?
View ArticleRedirect calls from IVR to a CUCM number
Hello, colleagues. I need you help. Working with FreePBX for second time, and need you help. I have FreePBX with with SIP Trunk (PJSIP channel) with CUCM. On FreePBX I create IVR. In main i need to...
View ArticleRedirect calls from IVR to a CUCM number
All contexts need a priority 1, i.e: [cucm-context] exten => _XXXX,1,Goto(cucm-route,${EXTEN},1)
View ArticleDigium D80 - EPM - No Unassigned Extensions
You dont have to tell the pbx…the phone asks you after the reset, which extension number it should use to connect/login to the pbx. If you dont reset the phone, it knows its extension number anyway…
View ArticleNo audio on remote extension
Thank you for responding to my question. Yes, both the local and remote networks (192.168.0.0/24 and 192.168.22.0/24) are listed under the General SIP Settings tab under Asterisk SIP Settings. I...
View ArticleNo audio on remote extension
That was it!.. I had both local and remote LAN addresses listed under the general SIP tab for Asterisk SIP Settings, but it did not start working until I added the remote address under the chan_pjsip...
View ArticleClik here to view.
No audio on remote extension
I’m glad that you got it working. However, RFEngineer: … but it did not start working until I added the remote address under the chan_pjsip tab. This should not have been required and you may have...
View ArticleNo audio on remote extension
Hi Stewart, well it may be more complicated that I first assumed. I was becoming frustrated is IPSec and after much web searching I decided to implement an openvpn bridge at both ends of the link. I...
View ArticleGoogle Phone Book
Could be, but honestly, relying on any Google service is waste. Just maintain your address book lookup source on some other service.
View ArticleAdding 0 to incoming external calls
Hi everybody, I know this problem has been discussed several times in this forum, but all the answers I found just didn’t help… usually because they were written for other (older) versions of freePBX....
View ArticleAdding 0 to incoming external calls
In the pjsip Settings for your trunk, General tab, there is a Context field that defaults to from-pstn. Change that to prepend-zero and your custom dialplan will be executed for all incoming calls on...
View ArticleRemotely force custom module upgrade
We do have a commercial solution that may be of help, feel free to send me a PM if you would like to know more.
View ArticleAdding 0 to incoming external calls
The system is located in germany, and yes the PBX is configured to add an initial 0 to external numbers. For the question why… this is a good question, but I couldn’t tell you the answer. I haven’t...
View ArticleClik here to view.
Rerouted inbound call to external destination does not preserve CID
Stewart1: If not, then you need to find out what your provider requires to send a number that’s not yours. It may be technical e.g. Diversion header, contractual (sign supplementary agreement) or they...
View ArticleRerouted inbound call to external destination does not preserve CID
So, to summarize for other readers, always test the behaviour of an extension CID (Outbound CID for your extension) you own and a random one, you don’t own!
View ArticleMove commercial modules from one deployment id to another
Hello. I have two freepbx servers with two different deployment id. First one has commercial modules. I know there is way to deactivate deployment id from first server and than reactivate same...
View ArticleTime Condition: "Current: Unknown State"
With the Calendar option, everything works as expected. So the issue could be related to the Time Groups. Thank you cliffo80!
View Article