↧
DOException (42S22) SQLSTATE[42S22]: Column not found: 1054 Unknown column 'time_mode' in 'field list'
↧
Adding Outbound Route failed
↧
↧
User Control Panel can't connect to MySQL Server
Hi All,
Recently the UCP (14.0.2.1) stopped working on my FreePBX (14.0.2.10) system. Looking at the ucp_err.log I see:
There was an error with MySQL Connection
Error: Can’t connect to MySQL server on ‘127.0.0.1’ (111 “Connection refused”) code: 2003 }
Error: MySQL server has gone away code: 2006
running netstat -ntlup | grep mysql shows:
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 19251/mysqld
Seems like mysql is up and running yet ucp can’t seem to connect to it.
Any ideas?
↧
DOException (42S22) SQLSTATE[42S22]: Column not found: 1054 Unknown column 'time_mode' in 'field list'
A post was merged into an existing topic: Adding Outbound Route failed
↧
What would you like to see added in FreePBX 15?
Except Cisco phones are terrible on open source asterisk and free switch as their normal firmware is meant to utilize Cisco call manager. So when you choose Cisco phones with asterisk or freeeswitch you are actually giving your clients a similar experience to if you choose Digium or Sangoma phones for Cisco call manager.
↧
↧
Google Voice no outbound route
Use the edge version. It’s already fixed.
↧
Why is a girl photoshopped into the picture of the server cabinets on the community page?
Or link to the website you are talking about
↧
.call file call to intercom on local phone
You want a channel of:
local/*80511@from-internal↧
Gsm card sangoma not working on any version freepbx plz help
gsm card sangoma not working on any version freepbx plz help
GSM CARD Sangoma W400 Very BAD
I will be kicked out of my work|
plz help
↧
↧
.call file call to intercom on local phone
That was it!! Thank you, made my day!
↧
Why is a girl photoshopped into the picture of the server cabinets on the community page?
↧
Why is a girl photoshopped into the picture of the server cabinets on the community page?
Two equally plausible explanations:
- In the spirit of the season, this is an Easter egg left for sharp eyed forum users to discover, or …
- She exists in a hellish purgatory halfway between life and death and casts no reflection (like most of us working in IT)
In either case, no bug report is required.
↧
Hangup on connect
Not using chan_sip at all - all extensions are pjsip or IAX !!
↧
↧
What would you like to see added in FreePBX 15?
There are 2 general classes of Cisco phones - the SPA series that are SIP and the Enterprise series which can be ordered either with Skinny or SIP. I think the Enterprise series with Skinny are the ones you are talking about. Not sure what you mean by “normal firmware” here. The end user wouldn’t know the difference. And the SPA series are really old Linksys product that’s been gussied up. Cisco is positioning to sunset that line anyway and use their new multiprotocol phones. I’m not sure why you would think anything about the experience would be different - what more do you need in a desktop phone than the ability to dial, search an ldap directory, have a message waiting light, and plug in a headset. And the Cisco phones can be made to do that even if for the Enterprise phones it appears to be as kludgy as getting the Aastra 6753i to do it. Since you can define buttons on the phones how you want, it seems to me that for the SPA series at least they wouldn’t be any worse than a Yealink.
Oh and that is one other thing that should be in Endpoint Manager - a firmware library for phones. (I don’t know if one is in there or not) but it sucks to have to root around all over the Internet for firmware for phones.
It appears to me the biggest advantage of using the Sangoma phones is plug and play. And yes I know there are people out there who don’t really want to understand the in depth of the products they use and if they were going to do a cheap and dirty system they would be well advised to setup a FreePBX system with the free version of Endpoint manager and Sangoma phones. Then its just WYSIWYG for them and they don’t have to understand provisioning and button assignments or any of that icky stuff. But I don’t run that kind of business. What is the fun of IT when you don’t know the stuff works that you are selling?
Seriously, though, I can’t help but point out that you lack an Android softphone. I’m currently using the last beta version of CSipSimple. It works really well and doesn’t have NAT issues and all of that. But when I tried it out on an android version newer than 6, it crashed. And of course it lacks directory lookup, message waiting, and so on. Video does work on it after a fashion. Sangoma could do a heck of a lot worse by picking up that code and forking it into your own softphone app and I have to say that if you really want to be in the business of selling phones, both iOS and Android SIP softphones are so lacking, that if you had a really good softphone app that’s the one phone I’d be in the front of the line to buy from you.
↧
What would you like to see added in FreePBX 15?
There is one.
In the works. It’s called Zulu and it’s commercial.
↧
What would you like to see added in FreePBX 15?
Been there done that, you buy client devices that works well with your server, not the other way around…
You just don’t buy a computer that works well with your keyboard… You know.
Yes Cisco phones are cool, but can sometimes be a pain in the… …to provision with any non Cisco PBX.
We’ve been using Yealink, Polycom, Fanvil, but we now stick to Sangoma Phones. You can literally drop ship these phones and the client can just plug it in… And bingo it works!!
(All you need is getting the MAC addresses from your supplier so you can add them in the redirection portal and EPM)
We use EPM with OBI ATA’s, works great.
↧
Hangup on connect
Your Trunks as well?
↧
↧
FreePBX polling Time Server every three minutes
Yes, I’m looking to set the polling interval.
↧
FreePBX 13: failed to open stream: File name too long File:/var/www/html/admin/modules/firewall/Firewall.class.php:226
Hello,
Just enabled Firewall on my FreePBX installation and trying to change Traffic Zones for interfaces. No matter which zones I’ll set I can’t save any changes. Once I press “Update Interfaces” button red splash window apperas with following error message “Whoops\Exception\ErrorException
fopen(/var/spool/asterisk/incron/firewall.updateinterfaces.eJyVkL0OwyAMhN_Fc5D6u+RZWKxgElQwEZC2apR3r5UuSduFxTr57r7hZuhiCMgGWphGg4UcF0oWO8rQQIhm8iSedYke6L38JJDlM2ugMhw0tKJekUmUhrXN6DU0GgzlLrmxuMiryViUY5JjNSzNCjh+AUqaciHztx+oRxtZSYZvW8ipAlLIO_xFnCsQ4yAp5ZG3gEsFgJ6flVToA+_muFZQ7rTfYoHlDQRzoIw=): failed to open stream: File name too long
File:/var/www/html/admin/modules/firewall/Firewall.class.php:226”
Any ideas how to solve this? Anyone having the same issue?
Regards,
Artello
↧
FreePBX 13: failed to open stream: File name too long File:/var/www/html/admin/modules/firewall/Firewall.class.php:226
All modeles updated:
+----------------------+-------------+----------+------------+
| Module | Version | Status | License |
+----------------------+-------------+----------+------------+
| accountcodepreserve | 13.0.2 | Enabled | GPLv2 |
| announcement | 13.0.7.1 | Enabled | GPLv3+ |
| areminder | 13.0.10.6 | Enabled | Commercial |
| arimanager | 13.0.4 | Enabled | GPLv3+ |
| asterisk-cli | 13.0.4 | Enabled | GPLv3+ |
| asteriskinfo | 13.0.7.1 | Enabled | GPLv3+ |
| backup | 13.0.27.17 | Enabled | GPLv3+ |
| blacklist | 13.0.14.8 | Enabled | GPLv3+ |
| bria | 13.0.16 | Enabled | Commercial |
| broadcast | 13.0.12.10 | Enabled | Commercial |
| builtin | | Enabled | |
| bulkdids | 13.0.2 | Enabled | GPLv3+ |
| bulkextensions | 13.0.3 | Enabled | GPLv3+ |
| bulkhandler | 13.0.14.4 | Enabled | GPLv3+ |
| callback | 13.0.5.2 | Enabled | GPLv3+ |
| callerid | 13.0.8.9 | Enabled | Commercial |
| callforward | 13.0.4.2 | Enabled | AGPLv3+ |
| calllimit | 13.0.5.5 | Enabled | Commercial |
| callrecording | 13.0.11.5 | Enabled | AGPLv3+ |
| callwaiting | 13.0.4.1 | Enabled | GPLv3+ |
| campon | 13.0.4.1 | Enabled | GPLv3+ |
| cdr | 13.0.32 | Enabled | GPLv3+ |
| cel | 13.0.26.2 | Enabled | GPLv3+ |
| certman | 13.0.37 | Enabled | AGPLv3+ |
| cidlookup | 13.0.12.2 | Enabled | GPLv3+ |
| conferences | 13.0.23.9 | Enabled | GPLv3+ |
| conferencespro | 13.0.27.7 | Enabled | Commercial |
| configedit | 13.0.7.1 | Enabled | AGPLv3+ |
| contactmanager | 13.0.42.12 | Enabled | GPLv3+ |
| core | 13.0.122.13 | Enabled | GPLv3+ |
| cos | 13.0.12.1 | Enabled | Commercial |
| customappsreg | 13.0.5.4 | Enabled | GPLv3+ |
| cxpanel | 13.0.5.1 | Enabled | GPLv3 |
| dahdiconfig | 13.0.33.13 | Enabled | GPLv3+ |
| dashboard | 13.0.25.3 | Enabled | AGPLv3+ |
| daynight | 13.0.15 | Enabled | GPLv3+ |
| dictate | 13.0.5 | Enabled | GPLv3+ |
| digium_phones | 13.0.7.3 | Enabled | GPLv2 |
| digiumaddoninstaller | 2.11.0.14 | Enabled | GPLv2 |
| directory | 13.0.19.5 | Enabled | GPLv3+ |
| disa | 13.0.6.1 | Enabled | AGPLv3+ |
| donotdisturb | 13.0.3.1 | Enabled | GPLv3+ |
| endpoint | 13.0.118.6 | Enabled | Commercial |
| extensionroutes | 13.0.10.5 | Enabled | Commercial |
| fax | 13.0.40.5 | Enabled | GPLv3+ |
| faxpro | 13.0.38.9 | Enabled | Commercial |
| featurecodeadmin | 13.0.6.4 | Enabled | GPLv3+ |
| findmefollow | 13.0.38.11 | Enabled | GPLv3+ |
| firewall | 13.0.50 | Enabled | AGPLv3+ |
| framework | 13.0.194.5 | Enabled | GPLv2+ |
| freepbx_ha | 13.0.11 | Enabled | Commercial |
| fw_langpacks | 12.0.7 | Enabled | GPLv3+ |
| hotelwakeup | 13.0.17.1 | Enabled | GPLv2 |
| iaxsettings | 13.0.6.6 | Enabled | AGPLv3 |
| infoservices | 13.0.1.2 | Enabled | GPLv2+ |
| irc | 2.11.0.7 | Enabled | GPLv3+ |
| ivr | 13.0.27.6 | Enabled | GPLv3+ |
| languages | 13.0.6 | Enabled | GPLv3+ |
| logfiles | 13.0.10.4 | Enabled | GPLv3+ |
| manager | 13.0.2.5 | Enabled | GPLv2+ |
| miscapps | 13.0.3.1 | Enabled | GPLv3+ |
| miscdests | 13.0.5 | Enabled | GPLv3+ |
| music | 13.0.22.3 | Enabled | GPLv3+ |
| outroutemsg | 13.0.2.1 | Enabled | GPLv3+ |
| paging | 13.0.26.5 | Enabled | GPLv3+ |
| pagingpro | 13.0.19.7 | Enabled | Commercial |
| parking | 13.0.19.8 | Enabled | GPLv3+ |
| parkpro | 13.0.30.13 | Enabled | Commercial |
| pbdirectory | 2.11.0.6 | Enabled | GPLv3+ |
| phonebook | 13.0.6.1 | Enabled | GPLv3+ |
| phpinfo | 13.0.2 | Enabled | GPLv2+ |
| pinsets | 13.0.8 | Enabled | GPLv3+ |
| pinsetspro | 13.0.9.5 | Enabled | Commercial |
| pm2 | 13.0.4.2 | Enabled | AGPLv3+ |
| presencestate | 13.0.8 | Enabled | GPLv3+ |
| printextensions | 13.0.3.1 | Enabled | GPLv3+ |
| queueprio | 13.0.2 | Enabled | GPLv3+ |
| queues | 13.0.34.9 | Enabled | GPLv2+ |
| qxact_reports | 13.0.15.6 | Enabled | Commercial |
| recording_report | 13.0.24.6 | Enabled | Commercial |
| recordings | 13.0.30.12 | Enabled | GPLv3+ |
| restapi | 13.0.21.1 | Enabled | AGPLv3 |
| restapps | 13.0.92 | Enabled | Commercial |
| ringgroups | 13.0.23.2 | Enabled | GPLv3+ |
| rmsadmin | 13.0.14.1 | Enabled | Commercial |
| sangomacrm | 13.0.4.25 | Enabled | Commercial |
| setcid | 13.0.6.2 | Enabled | GPLv3+ |
| sipsettings | 13.0.27.1 | Enabled | AGPLv3+ |
| sipstation | 13.0.14.8 | Enabled | Commercial |
| sms | 13.0.12.3 | Enabled | Commercial |
| sng_mcu | 13.0.5 | Enabled | Commercial |
| soundlang | 13.0.24.5 | Enabled | GPLv3+ |
| speeddial | 2.11.0.4 | Enabled | GPLv3+ |
| superfecta | 13.0.4.5 | Enabled | GPLv2+ |
| sysadmin | 13.0.76.1 | Enabled | Commercial |
| timeconditions | 13.0.34.9 | Enabled | GPLv3+ |
| tts | 13.0.10 | Enabled | GPLv3+ |
| ttsengines | 13.0.7.3 | Enabled | AGPLv3 |
| ucp | 13.0.42.5 | Enabled | AGPLv3+ |
| ucpnode | 13.0.34.9 | Enabled | Commercial |
| userman | 13.0.76.37 | Enabled | AGPLv3+ |
| versionupgrade | 13.0.1.2 | Enabled | Commercial |
| vmblast | 13.0.8 | Enabled | GPLv3+ |
| vmnotify | 13.0.22 | Enabled | Commercial |
| voicemail | 13.0.54.20 | Enabled | GPLv3+ |
| voicemail_report | 13.0.13.3 | Enabled | Commercial |
| vqplus | 13.0.38 | Enabled | Commercial |
| weakpasswords | 13.0.2 | Enabled | GPLv3+ |
| webcallback | 13.0.11.2 | Enabled | Commercial |
| webrtc | 13.0.32.8 | Enabled | GPLv3+ |
| xmpp | 13.0.17.5 | Disabled | AGPLv3 |
| zulu | 13.0.53.4 | Enabled | Commercial |
+----------------------+-------------+----------+------------+↧