Hello All,

I have a situation where randomly the PBX decides that calls won’t go through to an extension, upon checking the logs I see the below error.

res_pjsip_header_funcs.c:461 func_read_header: This function requires a PJSIP channel

At the time it was running FreePBX14 with Asterisk 13.
I decided to test again and switched to both Asterisk 14 & Asterisk 15 with the same results.
We are also current on all updates. 12.7.5-1805-3.sng7

I confirmed that ALL extensions including this one were configured as CHAN-SIP and not PJSIP and all trunks are also CHAN-SIP, at no point am I expecting anything to communicate over PJSIP.

Any ideas how I can get this to work properly again?

Thanks!

Thank you, I think that may be the simple solution going forward.

Hi everyone,
I have run into a problem today and I cannot seem to find the solution. After I ran a yum update and updated all the modules, I get an error trying to Apply Config:

Reload failed because retrieve_conf encountered an error: 1
exit: 1
Unable to continue. Only variables should be assigned by reference in /var/www/html/admin/modules/core/functions.inc.php on line 5454
#0 /var/www/html/admin/modules/core/functions.inc.php(5454): Whoops\Run->handleError(2048, ‘Only variables …’, ‘/var/www/html/a…’, 5454, Array)
#1 /var/www/html/admin/modules/core/functions.inc.php(2239): general_generate_indications()
#2 /var/www/html/admin/libraries/BMO/DialplanHooks.class.php(95): core_do_get_config(‘asterisk’)
#3 /var/lib/asterisk/bin/retrieve_conf(860): FreePBX\DialplanHooks->processHooks(‘asterisk’, Array)
#4 {main}

I am running
PBX Firmware:12.7.5-1805-3.sng7
FreePBX 14.0.3.6
This server was installed from the distro

Before this error in the CORE module, I got the same error for DAHDI Config module and Phone Apps module.

I removed those modules but I can’t remove the CORE, obviously. I tried reinstalling PHP as well.

Any help will be greatly appreciated. Let me know if I failed to provide important information.

Thank you

This is interesting. I just spent my day trying a number of different versions of motif or freepbx. From my past working check point.

The guide in the opening post has been updated to include Billsimons recommendations, I followed the guide from a fresh install start to finish myself, twice. Just to be sure that it works without any issues.

Inbound and outbound calls are working perfectly, and there were no errors. You are able to make use of inbound/outbound routes with FreePBX, as you normally would.

For now I added a disclaimer about using make samples until I can track down the reason for the errors.

Yealink already does this in any of their later firmware versions.

Hi Andrew,

You did supose we have no reported the issue, and you are wrong. Getting commercial support sometimes it takes to long, and the problem we are suffering is critical enough to downgrade Zulu version. We make hundreds of calls in a few minutes, and calls quality is not good enough to talk to anyone because of this issue.

Anyway, two ours after we downgraded it, we receibed a message from sangoma advertising the origin of the issue was detected and reported to R&D team. Issue still persists so we couldn’t operate with this version on a production machine.

So… if we have to return back again to v3, you advirtise we have to reset the Zulu data. What do you mean? What do we have to do? I wil appreciate any information about this,

Best regards.

There are 2 commands:
account.x.subscribe_register = XX
account.x.blf.subscribe_period = XX

The phones subscribes on boot and register but when the IP Changes the phone thinks it is already subscribed and does not resubscribe on re-register.

Changed this (account.x.blf.subscribe_period = 360) to 360s and it resubscribes in the time.

FreePBX 14.0.3.7
User Control Panel 14.0.2.8
WebRTC Phone 14.0.3.7

ok but I have a lot of commercial modules: epm, COS, fax professional, conference pro etc…

what happens to the configuration of these modules during the conversion process?

Do you have the PJSIP driver enabled?

oh, yes .-.
Shouldn’t I?

Supposed to start with the Asterisk user

When I try to start with asterisk, it request root

This is normal and, as far as I know, it’s harmless. I highly doubt this is the cause of your endpoint not ringing.

Here’s what i see in the log when i start up zulu 2 client:

[root@localhost ~]# cd /var/log/asterisk/
[root@localhost asterisk]# tail -n0 -f full
[2018-07-06 09:38:38] VERBOSE[23028] res_http_websocket.c: WebSocket connection from ‘127.0.0.1:44714’ for protocol ‘sip’ accepted using version ‘13’
[2018-07-06 09:38:38] VERBOSE[23037] res_http_websocket.c: WebSocket connection from ‘127.0.0.1:44720’ for protocol ‘sip’ accepted using version ‘13’
[2018-07-06 09:38:38] VERBOSE[23029] res_pjsip_registrar.c: Added contact ‘sip:8nuud52t@127.0.0.1:44714;transport=ws’ to AOR ‘90111’ with expiration of 600 seconds
[2018-07-06 09:38:38] VERBOSE[23041] res_pjsip/pjsip_configuration.c: Contact 90111/sip:8nuud52t@127.0.0.1:44714;transport=ws has been created
[2018-07-06 09:38:39] VERBOSE[23041] res_pjsip/pjsip_configuration.c: Endpoint 90111 is now Reachable
[2018-07-06 09:38:39] VERBOSE[23030] res_pjsip_registrar.c: Added contact ‘sip:k8eg3uls@127.0.0.1:44720;transport=ws’ to AOR ‘90111’ with expiration of 600 seconds
[2018-07-06 09:38:39] ERROR[23031] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:38:39] VERBOSE[23041] res_pjsip/pjsip_configuration.c: Contact 90111/sip:k8eg3uls@127.0.0.1:44720;transport=ws has been created
[2018-07-06 09:38:39] VERBOSE[23041] res_pjsip/pjsip_configuration.c: Contact 90111/sip:8nuud52t@127.0.0.1:44714;transport=ws is now Unreachable. RTT: 0.000 msec
[2018-07-06 09:38:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:38:39] VERBOSE[23041] res_pjsip/pjsip_configuration.c: Endpoint 90111 is now Unreachable
[2018-07-06 09:38:39] VERBOSE[23041] res_pjsip/pjsip_configuration.c: Contact 90111/sip:k8eg3uls@127.0.0.1:44720;transport=ws is now Unreachable. RTT: 0.000 msec
[2018-07-06 09:39:08] NOTICE[23029] res_pjsip/pjsip_distributor.c: Request ‘INVITE’ from ‘sip:1004@198.91.164.135’ failed for ‘158.69.4.167:60697’ (callid: 649938297-1265908043-430792800) - No matching endpoint found
[2018-07-06 09:39:08] NOTICE[23029] res_pjsip/pjsip_distributor.c: Request ‘INVITE’ from ‘sip:1004@198.91.164.135’ failed for ‘158.69.4.167:60697’ (callid: 649938297-1265908043-430792800) - No matching endpoint found
[2018-07-06 09:39:08] NOTICE[23029] res_pjsip/pjsip_distributor.c: Request ‘INVITE’ from ‘sip:1004@198.91.164.135’ failed for ‘158.69.4.167:60697’ (callid: 649938297-1265908043-430792800) - Failed to authenticate

Does anyone see something wrong in this? Here’s the log entries after doing outbound call on zulu 2 client:

JSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:41:23] NOTICE[23029] res_pjsip/pjsip_distributor.c: Request ‘OPTIONS’ from ‘“sipvicious” sip:100@1.1.1.1’ failed for ‘134.119.205.46:6168’ (callid: 309438111682822791574269) - No matching endpoint found
[2018-07-06 09:41:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:41:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:42:22] NOTICE[23029] res_pjsip/pjsip_distributor.c: Request ‘INVITE’ from ‘sip:2701119891164135@198.91.164.135’ failed for ‘209.160.120.12:56012’ (callid: 520370286-205508521-1542711836) - No matching endpoint found
[2018-07-06 09:42:27] NOTICE[23029] res_pjsip/pjsip_distributor.c: Request ‘INVITE’ from ‘“8202” sip:8202@198.91.164.135’ failed for ‘185.40.4.185:5070’ (callid: b5df4b65c7c9332944fbe25b676ade52) - No matching endpoint found
[2018-07-06 09:42:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:42:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:43:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:43:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:43:52] VERBOSE[23029] pbx_variables.c: Setting global variable ‘SIPDOMAIN’ to ‘192.168.1.102’
[2018-07-06 09:43:52] VERBOSE[23029] res_rtp_asterisk.c: DTLS ECDH initialized (secp256r1), faster PFS enabled
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [4169247897@from-internal:1] Macro(“PJSIP/90111-0000000e”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:1] Set(“PJSIP/90111-0000000e”, “TOUCH_MONITOR=1530884632.27”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:2] Set(“PJSIP/90111-0000000e”, “AMPUSER=90111”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:3] GotoIf(“PJSIP/90111-0000000e”, “0?report”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:4] ExecIf(“PJSIP/90111-0000000e”, “1?Set(REALCALLERIDNUM=90111)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:5] Set(“PJSIP/90111-0000000e”, “AMPUSER=111”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:6] GotoIf(“PJSIP/90111-0000000e”, “0?limit”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:7] Set(“PJSIP/90111-0000000e”, “AMPUSERCIDNAME=hongg”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:8] ExecIf(“PJSIP/90111-0000000e”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:9] GotoIf(“PJSIP/90111-0000000e”, “0?report”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:10] Set(“PJSIP/90111-0000000e”, “AMPUSERCID=111”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:11] Set(“PJSIP/90111-0000000e”, “__DIAL_OPTIONS=Ttr”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:12] Set(“PJSIP/90111-0000000e”, “CALLERID(all)=“hongg” <111>”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:13] GotoIf(“PJSIP/90111-0000000e”, “0?limit”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:14] ExecIf(“PJSIP/90111-0000000e”, “1?Set(GROUP(concurrency_limit)=111)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:15] ExecIf(“PJSIP/90111-0000000e”, “0?Set(CHANNEL(language)=)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:16] NoOp(“PJSIP/90111-0000000e”, “Macro Depth is 1”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:17] GotoIf(“PJSIP/90111-0000000e”, “1?report2:macroerror”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx_builtins.c: Goto (macro-user-callerid,s,19)
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:19] GotoIf(“PJSIP/90111-0000000e”, “1?continue”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx_builtins.c: Goto (macro-user-callerid,s,37)
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:37] Set(“PJSIP/90111-0000000e”, “CALLERID(number)=111”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:38] Set(“PJSIP/90111-0000000e”, “CALLERID(name)=hongg”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:39] GotoIf(“PJSIP/90111-0000000e”, “0?cnum”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:40] Set(“PJSIP/90111-0000000e”, “CDR(cnam)=hongg”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:41] Set(“PJSIP/90111-0000000e”, “CDR(cnum)=111”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-user-callerid:42] Set(“PJSIP/90111-0000000e”, “CHANNEL(language)=en”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [4169247897@from-internal:2] Gosub(“PJSIP/90111-0000000e”, “sub-record-check,s,1(out,4169247897,dontcare)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:1] GotoIf(“PJSIP/90111-0000000e”, “0?initialized”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:2] Set(“PJSIP/90111-0000000e”, “__REC_STATUS=INITIALIZED”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:3] Set(“PJSIP/90111-0000000e”, “NOW=1530884632”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:4] Set(“PJSIP/90111-0000000e”, “__DAY=06”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:5] Set(“PJSIP/90111-0000000e”, “__MONTH=07”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:6] Set(“PJSIP/90111-0000000e”, “__YEAR=2018”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:7] Set(“PJSIP/90111-0000000e”, “__TIMESTR=20180706-094352”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:8] Set(“PJSIP/90111-0000000e”, “__FROMEXTEN=111”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:9] Set(“PJSIP/90111-0000000e”, “__MON_FMT=wav”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:10] NoOp(“PJSIP/90111-0000000e”, “Recordings initialized”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:11] ExecIf(“PJSIP/90111-0000000e”, “0?Set(ARG3=dontcare)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:12] Set(“PJSIP/90111-0000000e”, “REC_POLICY_MODE_SAVE=”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:13] ExecIf(“PJSIP/90111-0000000e”, “0?Set(REC_STATUS=NO)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:14] GotoIf(“PJSIP/90111-0000000e”, “3?checkaction”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx_builtins.c: Goto (sub-record-check,s,17)
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@sub-record-check:17] GotoIf(“PJSIP/90111-0000000e”, “1?sub-record-check,out,1”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx_builtins.c: Goto (sub-record-check,out,1)
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [out@sub-record-check:1] NoOp(“PJSIP/90111-0000000e”, “Outbound Recording Check from 111 to 4169247897”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [out@sub-record-check:2] Set(“PJSIP/90111-0000000e”, “RECMODE=dontcare”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [out@sub-record-check:3] ExecIf(“PJSIP/90111-0000000e”, “1?Goto(routewins)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx_builtins.c: Goto (sub-record-check,out,7)
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [out@sub-record-check:7] Gosub(“PJSIP/90111-0000000e”, “recordcheck,1(dontcare,out,4169247897)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“PJSIP/90111-0000000e”, “Starting recording check against dontcare”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“PJSIP/90111-0000000e”, “dontcare”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [recordcheck@sub-record-check:3] Return(“PJSIP/90111-0000000e”, “”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [out@sub-record-check:8] Return(“PJSIP/90111-0000000e”, “”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [4169247897@from-internal:3] ExecIf(“PJSIP/90111-0000000e”, “0 ?Set(CDR(accountcode)=)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [4169247897@from-internal:4] Set(“PJSIP/90111-0000000e”, “MOHCLASS=default”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [4169247897@from-internal:5] Set(“PJSIP/90111-0000000e”, “_NODEST=”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [4169247897@from-internal:6] Macro(“PJSIP/90111-0000000e”, “dialout-trunk,2,4169247897,off”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:1] Set(“PJSIP/90111-0000000e”, “DIAL_TRUNK=2”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:2] UserEvent(“PJSIP/90111-0000000e”, “zulu-outbound-call,from:111,to:4169247897”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:3] ExecIf(“PJSIP/90111-0000000e”, “0?Set(DIAL_OPTIONS=tr)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:4] GosubIf(“PJSIP/90111-0000000e”, “0?sub-pincheck,s,1()”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:5] GotoIf(“PJSIP/90111-0000000e”, “0?disabletrunk,1”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:6] Set(“PJSIP/90111-0000000e”, “DIAL_NUMBER=4169247897”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:7] Set(“PJSIP/90111-0000000e”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:8] Set(“PJSIP/90111-0000000e”, “OUTBOUND_GROUP=OUT_2”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:9] Set(“PJSIP/90111-0000000e”, “DIAL_TRUNK_OPTIONS=T”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:10] GotoIf(“PJSIP/90111-0000000e”, “1?nomax”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx_builtins.c: Goto (macro-dialout-trunk,s,12)
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:12] GotoIf(“PJSIP/90111-0000000e”, “0?skipoutcid”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:13] Macro(“PJSIP/90111-0000000e”, “outbound-callerid,2”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:1] ExecIf(“PJSIP/90111-0000000e”, “0?Set(CALLERPRES(name-pres)=)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:2] ExecIf(“PJSIP/90111-0000000e”, “0?Set(CALLERPRES(num-pres)=)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:3] ExecIf(“PJSIP/90111-0000000e”, “0?Set(REALCALLERIDNUM=111)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:4] ExecIf(“PJSIP/90111-0000000e”, “0?Set(AMPUSER=111)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:5] GotoIf(“PJSIP/90111-0000000e”, “1?normcid”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx_builtins.c: Goto (macro-outbound-callerid,s,9)
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:9] Set(“PJSIP/90111-0000000e”, “USEROUTCID=”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:10] Set(“PJSIP/90111-0000000e”, “EMERGENCYCID=”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:11] Set(“PJSIP/90111-0000000e”, “TRUNKOUTCID=2262160486”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:12] GotoIf(“PJSIP/90111-0000000e”, “1?trunkcid”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx_builtins.c: Goto (macro-outbound-callerid,s,17)
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:17] ExecIf(“PJSIP/90111-0000000e”, “1?Set(CALLERID(all)=2262160486)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:18] ExecIf(“PJSIP/90111-0000000e”, “0?Set(CALLERID(all)=)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:19] ExecIf(“PJSIP/90111-0000000e”, “0?Set(CALLERID(all)=)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:20] ExecIf(“PJSIP/90111-0000000e”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:21] ExecIf(“PJSIP/90111-0000000e”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:22] Set(“PJSIP/90111-0000000e”, “CDR(outbound_cnum)=2262160486”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-outbound-callerid:23] Set(“PJSIP/90111-0000000e”, “CDR(outbound_cnam)=”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:14] GosubIf(“PJSIP/90111-0000000e”, “0?sub-flp-2,s,1()”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:15] Set(“PJSIP/90111-0000000e”, “OUTNUM=4169247897”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:16] Set(“PJSIP/90111-0000000e”, “custom=SIP/fpbx-1-9Z6DKN88o9tg”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:17] ExecIf(“PJSIP/90111-0000000e”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)T)”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:18] ExecIf(“PJSIP/90111-0000000e”, “0?Set(DIAL_TRUNK_OPTIONS=TM(confirm))”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:19] Macro(“PJSIP/90111-0000000e”, “dialout-trunk-predial-hook,”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“PJSIP/90111-0000000e”, “”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:20] GotoIf(“PJSIP/90111-0000000e”, “0?skipcrm”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:21] Set(“PJSIP/90111-0000000e”, “__CRM_DIRECTION=OUTBOUND”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:22] Set(“PJSIP/90111-0000000e”, “__CRM_DESTINATION=4169247897”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:23] Set(“PJSIP/90111-0000000e”, “__CRM_SOURCE=111”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:24] AGI(“PJSIP/90111-0000000e”, “sangomacrm.agi”) in new stack
[2018-07-06 09:43:52] VERBOSE[23320][C-00000010] res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/sangomacrm.agi
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] res_agi.c: <PJSIP/90111-0000000e>AGI Script sangomacrm.agi completed, returning 0
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:25] Set(“PJSIP/90111-0000000e”, “CHANNEL(hangup_handler_push)=crm-hangup,s,1”) in new stack
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:26] NoOp(“PJSIP/90111-0000000e”, “CRM Finished”) in new stack
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:27] GotoIf(“PJSIP/90111-0000000e”, “0?bypass,1”) in new stack
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:28] ExecIf(“PJSIP/90111-0000000e”, “1?Set(CONNECTEDLINE(num,i)=4169247897)”) in new stack
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:29] ExecIf(“PJSIP/90111-0000000e”, “1?Set(CONNECTEDLINE(name,i)=CID:2262160486)”) in new stack
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:30] ExecIf(“PJSIP/90111-0000000e”, “0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)2262160486)”) in new stack
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:31] GotoIf(“PJSIP/90111-0000000e”, “0?customtrunk”) in new stack
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-dialout-trunk:32] Dial(“PJSIP/90111-0000000e”, “SIP/fpbx-1-9Z6DKN88o9tg/4169247897,300,T”) in new stack
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] netsock2.c: Using SIP RTP TOS bits 184
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] netsock2.c: Using SIP RTP CoS mark 5
[2018-07-06 09:43:54] VERBOSE[23320][C-00000010] app_dial.c: Called SIP/fpbx-1-9Z6DKN88o9tg/4169247897
[2018-07-06 09:43:55] VERBOSE[23320][C-00000010] app_dial.c: SIP/fpbx-1-9Z6DKN88o9tg-0000000d is making progress passing it to PJSIP/90111-0000000e
[2018-07-06 09:44:15] VERBOSE[23320][C-00000010] app_dial.c: SIP/fpbx-1-9Z6DKN88o9tg-0000000d answered PJSIP/90111-0000000e
[2018-07-06 09:44:15] VERBOSE[23368][C-00000010] bridge_channel.c: Channel SIP/fpbx-1-9Z6DKN88o9tg-0000000d joined ‘simple_bridge’ basic-bridge <962e484d-d2ad-4658-9268-3e5077d2941f>
[2018-07-06 09:44:15] VERBOSE[23320][C-00000010] bridge_channel.c: Channel PJSIP/90111-0000000e joined ‘simple_bridge’ basic-bridge <962e484d-d2ad-4658-9268-3e5077d2941f>
[2018-07-06 09:44:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:44:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:44:40] VERBOSE[23368][C-00000010] bridge_channel.c: Channel SIP/fpbx-1-9Z6DKN88o9tg-0000000d left ‘simple_bridge’ basic-bridge <962e484d-d2ad-4658-9268-3e5077d2941f>
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] bridge_channel.c: Channel PJSIP/90111-0000000e left ‘simple_bridge’ basic-bridge <962e484d-d2ad-4658-9268-3e5077d2941f>
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] app_macro.c: Spawn extension (macro-dialout-trunk, s, 32) exited non-zero on ‘PJSIP/90111-0000000e’ in macro ‘dialout-trunk’
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Spawn extension (from-internal, 4169247897, 6) exited non-zero on ‘PJSIP/90111-0000000e’
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Executing [h@from-internal:1] Macro(“PJSIP/90111-0000000e”, “hangupcall”) in new stack
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-hangupcall:1] GotoIf(“PJSIP/90111-0000000e”, “1?theend”) in new stack
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-hangupcall:3] ExecIf(“PJSIP/90111-0000000e”, “0?Set(CDR(recordingfile)=)”) in new stack
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Executing [s@macro-hangupcall:4] Hangup(“PJSIP/90111-0000000e”, “”) in new stack
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] app_macro.c: Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘PJSIP/90111-0000000e’ in macro ‘hangupcall’
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on ‘PJSIP/90111-0000000e’
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] app_stack.c: PJSIP/90111-0000000e Internal Gosub(crm-hangup,s,1) start
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Executing [s@crm-hangup:1] NoOp(“PJSIP/90111-0000000e”, “Sending Hangup to CRM”) in new stack
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Executing [s@crm-hangup:2] NoOp(“PJSIP/90111-0000000e”, “HANGUP CAUSE: 16”) in new stack
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Executing [s@crm-hangup:3] ExecIf(“PJSIP/90111-0000000e”, “0?Set(__CRM_VOICEMAIL=)”) in new stack
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Executing [s@crm-hangup:4] NoOp(“PJSIP/90111-0000000e”, “MASTER CHANNEL: 1530884632.27 = 1530884632.27”) in new stack
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Executing [s@crm-hangup:5] GotoIf(“PJSIP/90111-0000000e”, “0?return”) in new stack
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Executing [s@crm-hangup:6] Set(“PJSIP/90111-0000000e”, “__CRM_HANGUP=1”) in new stack
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] pbx.c: Executing [s@crm-hangup:7] AGI(“PJSIP/90111-0000000e”, “sangomacrm.agi”) in new stack
[2018-07-06 09:44:40] VERBOSE[23320][C-00000010] res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/sangomacrm.agi
[2018-07-06 09:44:41] VERBOSE[23320][C-00000010] res_agi.c: <PJSIP/90111-0000000e>AGI Script sangomacrm.agi completed, returning 0
[2018-07-06 09:44:41] VERBOSE[23320][C-00000010] pbx.c: Executing [s@crm-hangup:8] Return(“PJSIP/90111-0000000e”, “”) in new stack
[2018-07-06 09:44:41] VERBOSE[23320][C-00000010] app_stack.c: Spawn extension (from-internal, h, 1) exited non-zero on ‘PJSIP/90111-0000000e’
[2018-07-06 09:44:41] VERBOSE[23320][C-00000010] app_stack.c: PJSIP/90111-0000000e Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=
[2018-07-06 09:45:13] NOTICE[23029] res_pjsip/pjsip_distributor.c: Request ‘INVITE’ from ‘sip:2801119891164135@198.91.164.135’ failed for ‘209.160.120.12:54451’ (callid: 985483865-1278413173-2126021204) - No matching endpoint found
[2018-07-06 09:45:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:45:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:46:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:46:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:46:59] ERROR[18262] pjproject: sip_transport. Error processing 602 bytes packet from UDP 209.160.120.12:59038 : PJSIP syntax error exception when parsing ‘Request Line’ header on line 1 col 12:
INVITE sip: 972592277589@198.91.164.135 SIP/2.0
Via: SIP/2.0/UDP 0.0.0.0:59038;branch=z9hG4bK91933912
Max-Forwards: 70
From: <sip: 19891164135@198.91.164.135>;tag=1821260441
To: <sip: 972592277589@198.91.164.135>
Call-ID: 1490204670-1280895274-1989652240
CSeq: 1 INVITE
Contact: <sip: 19891164135@212.129.10.158:59038>
User-Agent: pplsip
Content-Type: application/sdp
Content-Length: 201

v=0
o= 19891164135 16264 18299 IN IP4 0.0.0.0
s=pplsip
c=IN IP4 0.0.0.0
t=0 0
m=audio 25282 RTP/AVP 100 6 0 8 3 18 5 101
a=rtpmap:0 pcmu/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-11

– end of packet.
[2018-07-06 09:47:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:47:39] ERROR[23029] res_pjsip.c: Error 171060 ‘Unsupported transport (PJSIP_EUNSUPTRANSPORT)’ sending OPTIONS request to endpoint 90111
[2018-07-06 09:48:11] NOTICE[23029] res_pjsip/pjsip_distributor.c: Request ‘OPTIONS’ from ‘“sipvicious” sip:100@1.1.1.1’ failed for ‘37.49.231.44:5196’ (callid: 921249368871444214272435) - No matching endpoint found

When I switched to PJSIP being the primary for a certain server with CHAN_SIP still on I was getting the opposite error. I almost wonder if it sends headers for both channels at the same time when both are installed so one automatically fails.

We tried hotdesking with Yealinks but it required using the SIP password to login. I think the Sangoma’s just require the voicemail password so it works more as intended.

I’ve got 32 bit freepbx installed because the pc i’m using as the server only supports 32 bit (it’s old). Should i put the latest 64-bit freepbx on a newer pc? (I have another pc, but i don’t really want to wipe it and install freepbx if i don’t have to.) Will the latest 64 bit resolve my issues?

Bingo.