FreePBX 17 - Sangoma P330/320/310, EPM with DPMA enabled
Just a couple notes that may help. The lack of a web GUI after initial configuration of P-series is expected. The factory shipped firmware on the P-series doesn’t support the Sangoma redirect service...
View ArticleFreePBX 17 - Sangoma P330/320/310, EPM with DPMA enabled
Firmware is up to date, manually done from web interface prior to provisioning.
View ArticleSip vicious, friendly-scanner, how to stop it?
@david55 I’ve also seen it appear in the SIP INVITE itself too.
View ArticleFreePBX / DDNS location
I have FreePBX in the cloud with a static IP. I have a main location with a static IP. That IP is whitelisted, everything has worked great for years. I have a new location coming online with no static...
View ArticleFreePBX / DDNS location
Just add the ddns name in the firewall under Trusted sites and under Intrusion detection, just like you would an ip address.
View ArticleFreePBX / DDNS location
That depends on whether or not the ISP gratuitously changes addresses, and whether the site stays online continuously. (Some ISPs change address even if the user stays online, and rather more probably...
View ArticleClik here to view.
SIPStation fax issue [forked by mod]
FreerPBXer: The multiple FreePBX packet captures we posted to the ticket The multiple packet captures from our firewall that we posted to the ticket AFAICT your two firewall logs – only two? labeled...
View ArticleSIPStation fax issue [forked by mod]
Your response is useful and I’m sure that @FreerPBXer is grateful for your suggestions. I’m interested to see if any of those suggestions effect any change on the service issues. That said, I’m...
View ArticleSip vicious, call scanner , phone ringing all night
Have you tried a well setup TLS transport instead of UDP:5060 ? I don’t think anyone should rely on UDP:5060 for extensions and I’m pretty sure all this stuff would become a non entity should you not...
View ArticlePackets not being processed by Asterisk on Debian 12
Did iptables have any forwarding rules when it was running ? tcpdump, unlike sngrep, doesn’t filter anything you don’t ask it to
View ArticleSIPStation fax issue [forked by mod]
I think you and the rest are failing to realize, SIPStation has lost @FreerPBXer as a client. All of this is too little, too late. All of these suggestions goes back to @FreerPBXer repeated question...
View ArticleA Free Text to Speech Solution for System recordings?
It doesn’t get much easier or cheaper than https://pypi.org/project/gTTS/ If you just want TTS, if you want AI, that’s another not so easy or cheap question.
View ArticleSIPStation fax issue [forked by mod]
This horse, me, is beat to death. The client understandably demanded that we fix this, not in another month or months. We’re done troubleshooting and doing any additional uncompensated work on this....
View ArticleClik here to view.
Sangoma P Phones: Reload config from Endpoint Manager not working
Hi @unlikely The phone display won’t show any changes unless there is a difference in the firmware (FW) or BLF keys between the templates. If there is a change, the phone will display “FW upgrading”...
View ArticlePackets not being processed by Asterisk on Debian 12
Negative… no forwarding rules setup.
View ArticleSangoma P Phones: Reload config from Endpoint Manager not working
My phone already had a template applied, so template name didn’t change. But I changed a BLF key in the template, saved and rebuilt and update phone. BLF change was not applied. EPM is up to date,...
View ArticlePaging and intercom
Good day friends! I have such a problem can you help… FreePBX 15 is installed… There is a task to play one audio file every day at 9 o’clock. For this I use a paging intercom module The problem is...
View ArticleHow to replace deprecated macro [macro-dialout-trunk-predial-hook]
Hi. I am going to migrate few lines to mark CDR’s fields accountcode and userfield before the call is placed onto a trunk; that’s because i am migrating another old FPBX15 to 17 (and as you know...
View ArticlePaging and intercom
What have you done to the Huawei to disable the protection against eavesdropping? Autoanswer is not something that should be possible to invoke in the default set up for the phone. If you have enabled...
View ArticleHow to replace deprecated macro [macro-dialout-trunk-predial-hook]
It looks to me as though the name is unchanged, but it now ends with Return, rather than MacroExit.
View Article