Clik here to view.
Grandstream HT841 - Unable to make outgoing calls
Here the toNumber is N/A is it also a clue ?
View ArticleGrandstream HT841 - Unable to make outgoing calls
And this is the sip log of the HT841: I have to add some space in the log ip to be able to publish HT841 — 2025-02-13 15:29:29. 395 RECEIVING FROM 10. 6. 10. 100:5060 INVITE sip : xxxxxxx101@10. 6....
View ArticleClik here to view.
Where to start?
So, new here. Seems like there’s a lot on this forum that I don’t understand yet. What would be a good place to start?
View ArticleGrandstream HT841 - Unable to make outgoing calls
You couuld first try configuring it without authentication, to ensure that your issue is not related to that. Double check that the UDP ports are correct too. On previous models, IIRC, the ports start...
View Article10-15 second pause before the IVR announcement plays
Yes! I adjusted the wait time and disabled the Detect Fax on 2 Inbound routes that didn’t require this option. Now the IVR starts after 3 seconds. Thank you very much!
View ArticleGrandstream HT841 - Unable to make outgoing calls
On the HT841 UDP port by default are 6060 to 6066 (up by 2) I have set on the trunk authentication to none, and by the way registration goes also to none. No I have a different message saying that all...
View ArticleGrandstream HT841 - Unable to make outgoing calls
That is probably related to some configuration left behind. If you want, I can configure it for you step by step through AnyDesk. If you find this convenient, just send me a private message with the...
View ArticleWhere to start?
Check out Crosstalk Solutions youtube channel on freepbx setup. https://www.youtube.com/watch?v=l30WKTYf9ZY&list=PL1fn6oC5ndU_umAhL9A_1zkC90hMPDPNO
View ArticleINVITE received but extensions not responding/connecting overtime
Hi, i’ve been trying to setup a small FreePBX system and have mostly got it going after many bumps in the road. My issue is that, apparently randomly, incoming calls hit the PBX, i get the INVITE...
View ArticleClik here to view.
Grandstream HT841 - Unable to make outgoing calls
Cherpi: HT841 — 2025-02-13 15:29:29. 405 SENDING TO 10. 6. 10. 100:5060 SIP/2. 0 404 Not Found Via: SIP/2. 0/UDP 10. 6. 10. 100:5060;rport=5060;branch=z9hG4bKPj4a13f591-0c02-4a17-9f7f-e2ea14d8c017...
View ArticleRequire user confirmation on Voice Mail
Hello, Is there a way in FreePBX (version 15, Asterisk 16) to require the user to confirm his voicemail message. The main thing we need is that messages, where the user just hanged up at their end,...
View ArticleRequire user confirmation on Voice Mail
They should just be instructed to press # when they are done, you should send a generic tutorial for VM so your end users understand how to PROPERLY, use Comedian mail. Here is a generic write up: New...
View ArticleWhere to start?
What are you trying to do? Reading the documents is a good place to start. Reading more up on what your dad is doing with the PBX is also a good place to start.
View ArticleClik here to view.
Where to start?
I would also start with the Freepbx 16 ISO(if you are just trying to learn), the installation is easier. FreePBX - Let Freedom Ring Download | FreePBX - Let Freedom Ring Need FreePBX in the Cloud? Try...
View ArticleClik here to view.
Where to start?
@BengalEmpire767 Still you are same place? Still you Don’t know what you can do ? Last time many people make you suggestions and still you are keep asking same question. How to use FreePBX? General...
View ArticleRequire user confirmation on Voice Mail
Thanks for the reply. Maybe I did not explained well my need. Our user wants that when callers leave him a message, it will not be recorded if the caller just hanged up after recording the message....
View Article