Clik here to view.
Module design tweak idea
ntadmin: The times you calculated towards the end of https://github.com/FreePBX/framework/pull/7 provide an idea of what I'm talking about. I am running the same tests and now getting .1 of a second....
View ArticleClik here to view.
Numerious Errors due to Certificate Manager update failure
JessicaRabbit: I am not able to create a certificate. I am afraid to update Certman. Where do we stand with the issues in this thread? Please give details.
View ArticleClik here to view.
CDR logs call every 15 seconds instead of total
get2guy: Why does it happen and how i can fix it? Is this Asterisk 12+?
View ArticleCDR logs call every 15 seconds instead of total
Asterisk 13.2.0 built by mockbuild @ jenkins2.schmoozecom.netFreePBX 1.812.210.58-1
View ArticleHacking attempts?
At Nerd Vittles, we've been wrestling with VoIP firewall approaches for more than 5 years. In the spirit of cooperation, let me offer a few comments about what we've learned in hopes that it will...
View ArticleCan't pick up parked call
I've opened up a ticket with the commercial module support queue since we did pay for PLP. I've also continued to update the system hoping that by dumb luck a fix would come in. Still nothing - we are...
View ArticleClik here to view.
System Admin module update resets RTP range to default?
Hello,I'm digging through my logs, and I just wanted to see if I'm understanding correctly:Last Friday, the System Admin module did an automatic upgrade. It's difficult to divine from looking at the...
View ArticleBest practices for Caller ID name to appear?
Internally, everything works fine. The phones display full Caller ID, but if I call an outside line then only the number gets displayed. Flowroute says the issue is with my PBX's config. I'm using...
View ArticleClik here to view.
System Admin module update resets RTP range to default?
cmhxaktsoft: If it is normal for this value to be overwritten, would I be correct in adding the lines below to the rtp_custom.conf file? Dont do this. Migrating from 2.11 to 12 can sometimes cause...
View ArticleSystem Admin module update resets RTP range to default?
Perfect. Exactly what I was looking for. Thank you for your quick answer Andrew, and have a great week!
View ArticleClik here to view.
Latest updates to FreePBX 13 breaks incoming on Vitelity SIP Trunk
I'm still on 12 and have seen the same thing. Fail2ban bans vitelity. It just started around 10/19/15. fail2ban started banning vitelity General Help I've been using vitelity for a while now and have...
View ArticleBest practices for Caller ID name to appear?
Apparently this is a CNAM issue on Flowroute's side. Nothing to do with Freepbx. Mods, please delete.
View Articlefail2ban started banning vitelity
Same thing happened to me. No idea why it happened. But I think it has something to do with the most recent update to the new firewall module. I disabled, flushed iptables and whitelisted Vitelity's...
View ArticleThe ongoing Firewall Saga! (2nd Post has status)
I had the same thin happen. i uninstalled the firewall module via the following code. amportal a ma uninstall firewall the only issue I am running into is when I reinstall the firewall and enable it...
View ArticleLatest updates to FreePBX 13 breaks incoming on Vitelity SIP Trunk
Maybe my issue is different. Its not fail2ban or iptables. Its just the correct context not being used. I'll try to trace the dialplan and see what happens.
View ArticleCID and cnam lookup
If it is an issue, I would call your provider and ask them to check the number. I doubt your pbx will cache the number without the option being enabled.. I know CID Superfecta can cache results, hence...
View ArticleCID and cnam lookup
So I contacted Anveo and they said their provider, which is bandwidth.com, seems to be passing CID for free right now, so that's why we've suddenly noticed CID info being shown even though it isn't...
View ArticleWake Up Calls Wonky
Tried to add a wakeup call tonight. Call *68Pressed 730Pressed 1 for AMPressed 2 for list. It reads back: Wake up call for 1AM, November 5th, when it should be Wake up call for 730AM, November 3rd. I...
View Article