End Point Manager and Grandstream GXP2140/GXP2200EXT
Well I've had a really frustrating day with End Point Manager. I can't find good documentation on the process, Am I missing something? I guess I expected it to just work. I have 3 phones on my desk...
View ArticleLatest updates to FreePBX 13 breaks incoming on Vitelity SIP Trunk
FYI I was able to clear the problem by changing the host from inbound28.vitelity.net to inbound7.vitelity.net.
View ArticleLatest updates to FreePBX 13 breaks incoming on Vitelity SIP Trunk
For some reason unknown as of yet, Fail2ban seems to ban the ip address associated with inbound28 since the last FreePBX updates. this even though i have "whitelisted" all of the ip addresses...
View ArticleLatest updates to FreePBX 13 breaks incoming on Vitelity SIP Trunk
Just uninstall the firewall module for now and flush your iptables. This has nothing to do with contexts.
View ArticleLatest updates to FreePBX 13 breaks incoming on Vitelity SIP Trunk
I agree it has nothing to do with contexts. Its something in the the firewall module. As per tm1000, I disabled the firewall module, flushed iptables and life is back to normal.
View ArticleHacking attempts?
Here's what I do: I Don't forward ANY ports from your NAT router to your PBX. I set-up IPTables to restrict access from anyone on my network to only the ports that they need to access, i.e. UDP ports...
View ArticleQueue does not respect agent follow me or call forwarding settings
Hi, I have a similar issue, slightly different. I have a queue setup with static agents, which includes a static agent that has follow-me settings and no extension logged in. Everything works fine...
View ArticleClik here to view.
Outgoing call won't work
Pleae check this feedback: Desincarnage: response: "Forbidden" from 'sip:XXXXXXXXXX@xxx.xxx.xxx.xxx;tag=as59faa60
View ArticleCisco CP7975G Registration EPM
Hi Jeff, I see you and Reilly both have the Cisco 7960 & 7970 respectively. I bought 4 in total of these phones, 7960 & 7970 about a year ago and I still haven't figured out how to provision...
View ArticleClik here to view.
Module design tweak idea
tm1000: This is less than a second. Can you give me an example of speed degradation without it being an AGI? First, sorry for the late reply - I have been away. I thought I had sent a reply...
View ArticleBarge into a phone call
Hi, You can write your own dialplan to barge into a call with a whisper to your agent.You can even combine with two feature codes: One for barging without whispering. One for barging with whispering....
View ArticleTrying to send Voicemails to Emails in Version FreePBX 12.0.76.2
Would anyone else like to suggest anything?
View ArticleFindmefollowme page blank
it sounds like you have some bad data somewhere run amportal a ma dbug in your console then try loading the page.
View ArticleBarge into a phone call
oryou can use fop2 panel (15 users free) ---> http://www.fop2.comor isymphony panel (5 users free) ---> http://www.getisymphony.com
View Article[SOLVED] FreePBX 13 - Cannot add time conditions
+1 FreePBX 13 Official Distro... Any ideas?
View Article[SOLVED] FreePBX 13 - Cannot add time conditions
My fault, fat fingers.... The url you get is config.php?display=timegconditions&view=form change it to config.php?display=timeconditions&view=form I have pushed a fix should be published shortly
View ArticleCisco CP7975G Registration EPM
Hi Ed, Happy to help. We'll start with the easy part first. What firmware are the 7960 and 7970's on? Do they try to register? Jeff
View ArticleHacking attempts?
Thanks you all for getting on a more constructive line of dialog, a lot more can be accomplished by doing such. Graham, I'll reiterate as mentioned from a previous post that blacklisting is a good...
View ArticleClik here to view.
CDR logs call every 15 seconds instead of total
Hi all, I'm using asterisk & FreePBX in 3 locations. one of the PBX's CDR module writes a active call in each 15 seconds.So for each call i have 20-100 rows. For example: Pasted image1567x161 7.25...
View ArticleCID and cnam lookup
Thanks for the info. So nothing in the Asterisk Phone book. The inbound route settings are: CID Lookup Source->Source: None, and Superfecta CID Lookup->Enable CID Superfecta: (no checked),...
View Article