Clik here to view.
Latest updates to FreePBX 13 breaks incoming on Vitelity SIP Trunk
Ok, my fault I couldn't see what was wrong with the dialplan so i turned on sip debug only to see a "CANCEL" being sent from the provider. it turns out that the trunk was registered with another...
View ArticleClik here to view.
Wake Up Calls Wonky
Hi! I tried it to see if I had the same problem and I had the exact same result you had... It was pretty funny though because that extension is not in English so I got that message in another language...
View ArticleThe ongoing Firewall Saga! (2nd Post has status)
You can, by default, access the https:// connection of your machine, which will let you fix the configuration. You'll get a certificate error, but you should still be able to get in.
View ArticleClik here to view.
Hacking attempts?
I also have being building iptables for many years, my few of points that can "getya" if not considered Things to never use:- ssh on port 22 (just plain dumb)voip signalling on 50** (just plain...
View ArticleThe ongoing Firewall Saga! (2nd Post has status)
Hi Rob, I had the firewall setup nicely with my hosted PBX, but then I did the update and lost all my settings. Now my extensions only register if I'm connecting from a trusted IP. The responsive...
View ArticleGXW4104 and FreeBPX Fax Problem
Hello, I have a Grandstream GXW4104 which handles 4 PSTN lines. It is connected to FreePPX, in which every channel is registered as a SIP Trunk. Everything works fine according to phonecalls, both...
View ArticleLoud Environmental Noise Causing Issues
We have a location that has some very loud environmental noise at times. When the user talks on the phone using speaker the other party cuts in and out even when the person in the loud environment is...
View ArticleClik here to view.
Administrators Module NOT present
Thank you Andrew for the quick response.. I realize that this may be the wrong forum, but do you know if there's a way to add "maint" users to PiAF? I really need to add admin users to the system
View ArticleWhat is the trick for enabling PJSIP
I don't think it should be this difficult, must be missing something 6.12.65-31 Got to advanced settings - dialplan and operation - SIP channel driver - change to both - click on saveGo to SIP...
View ArticleFax Pro Outbound Fax Resolution
Any Update for asterisk 11.18, I'm having the same problem?
View ArticleLoud Environmental Noise Causing Issues
Hi, Probably your phone is not a full duplex in its speaker phone. Find yourself an ip phone that has a full duplex speaker. Thank you, Daniel FriedmanTrixton LTD.
View ArticleLoud Environmental Noise Causing Issues
We are using Digium D50 units. They have full duplex speaker phone as a feature. Right now the ports on the phone are setup to auto configure. Maybe I need to manually set these numbers to 100Mb/sec...
View ArticleLoud Environmental Noise Causing Issues
No, that won't help, the phones software/hardware does the echo cancellation, some are better than others, but any tune-able parameters will be only available through the phone's interfaces.
View ArticleClik here to view.
Commercial Modules, Support Provided, Upcoming Changes
Originally published at: https://www.freepbx.org/commercial-modules-support-provided-upcoming-changes/Commercial Modules, Support Provided, Upcoming Changes FreePBX has grown from dozens of modules a...
View ArticleWhat is the trick for enabling PJSIP
Asterisk version? PJSIP requires Asterisk 13 (or 12 which is EOL).
View ArticleAdministrators Module NOT present
Probably technically possible, but I've not seen it documented anywhere. You would have to change distros to get this feature.
View ArticleFax Pro Outbound Fax Resolution
This has nothing to do with Asterisk versions. Only FreePBX versions.
View Article